lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230201131454.1928136-1-yoshihiro.shimoda.uh@renesas.com>
Date:   Wed,  1 Feb 2023 22:14:49 +0900
From:   Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To:     davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com
Cc:     netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Subject: [PATCH net-next v5 0/5] net: renesas: rswitch: Modify initialization for SERDES and PHY

- My platform has the 88x2110.
- The MACTYPE setting of strap pin on the platform is SXGMII.
- However, we realized that the SoC cannot communicate the PHY with SXGMII
  because of mismatching hardware specification.
- We have a lot of boards which mismatch the MACTYPE setting.

So, I would like to change the MACTYPE as SGMII by software for the platform.

The patch [1/5] sets phydev->host_interfaces by phylink for Marvell PHY
driver (marvell10g) to initialize the MACTYPE.

- The patch [1/5] siplifies the rswitch driver.
- The patch [2/5] converts to phy_device from phylink.
- The patch [3/5] sets phydev->host_interfaces from this driver without
  any new functions of phylib.
- The patch [4/5] adds phy_power_on() calling to initialize the Ethernet
  SERDES PHY driver (r8a779f0-eth-serdes) for each channel.
- The patch [5/5] adds "max-speed" handling.

Changes from v4:
https://lore.kernel.org/all/20230127142621.1761278-1-yoshihiro.shimoda.uh@renesas.com/
 - No modification of phylink API.
 - Convert to phylib instead of phylink.
 - Add "max-speed" handling.

Changes from v3:
https://lore.kernel.org/all/20230127014812.1656340-1-yoshihiro.shimoda.uh@renesas.com/
 - Keep a pointer of "port" and more simplify the code.

Yoshihiro Shimoda (5):
  net: renesas: rswitch: Simplify struct phy * handling
  net: renesas: rswitch: Convert to phy_device
  net: renesas: rswitch: Add host_interfaces setting
  net: renesas: rswitch: Add phy_power_{on,off}() calling
  net: renesas: rswitch: Add "max-speed" handling

 drivers/net/ethernet/renesas/rswitch.c | 231 ++++++++++++-------------
 drivers/net/ethernet/renesas/rswitch.h |   4 +-
 2 files changed, 111 insertions(+), 124 deletions(-)

-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ