lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 2 Feb 2023 18:36:14 +0200
From:   Ido Schimmel <idosch@...sch.org>
To:     netdev@...io-technology.com
Cc:     davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vladimir Oltean <olteanv@...il.com>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Kurt Kanzenbach <kurt@...utronix.de>,
        Hauke Mehrtens <hauke@...ke-m.de>,
        Woojung Huh <woojung.huh@...rochip.com>,
        "maintainer:MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER" 
        <UNGLinuxDriver@...rochip.com>, Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Claudiu Manoil <claudiu.manoil@....com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Clément Léger <clement.leger@...tlin.com>,
        Jiri Pirko <jiri@...nulli.us>,
        Ivan Vecera <ivecera@...hat.com>,
        Roopa Prabhu <roopa@...dia.com>,
        Nikolay Aleksandrov <razor@...ckwall.org>,
        Russell King <linux@...linux.org.uk>,
        Christian Marangi <ansuelsmth@...il.com>,
        open list <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        "open list:RENESAS RZ/N1 A5PSW SWITCH DRIVER" 
        <linux-renesas-soc@...r.kernel.org>,
        "moderated list:ETHERNET BRIDGE" <bridge@...ts.linux-foundation.org>
Subject: Re: [PATCH net-next 0/5] ATU and FDB synchronization on locked ports

On Thu, Feb 02, 2023 at 05:19:07PM +0100, netdev@...io-technology.com wrote:
> On 2023-02-02 16:43, Ido Schimmel wrote:
> > On Thu, Feb 02, 2023 at 08:37:08AM +0100, netdev@...io-technology.com
> > wrote:
> > > On 2023-01-31 20:25, Ido Schimmel wrote:
> > > >
> > > > Will try to review tomorrow, but it looks like this set is missing
> > > > selftests. What about extending bridge_locked_port.sh?
> > > 
> > > I knew you would take this up. :-)
> > > But I am not sure that it's so easy to have selftests here as it is
> > > timing
> > > based and it would take the 5+ minutes just waiting to test in the
> > > stadard
> > > case, and there is opnly support for mv88e6xxx driver with this
> > > patch set.
> > 
> > The ageing time is configurable: See commit 081197591769 ("selftests:
> > net: bridge: Parameterize ageing timeout"). Please add test cases in the
> > next version.
> 
> When I was looking at configuring the ageing time last time, my finding was
> that the ageing time could not be set very low as there was some part in the
> DSA layer etc, and confusion wrt units. I think the minimum secured was like
> around 2 min. (not validated), which is not that much of an improvement for
> fast testing. If you know what would be a good low timeout to set, I would
> like to know.

My point is that the ageing time is parametrized via 'LOW_AGEING_TIME'
in forwarding.config so just use '$LOW_AGEING_TIME' in the selftest and
set it as high as it needs to be for mv88e6xxx in your own
forwarding.config.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ