[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y+YkhjyaL+hNGW+7@shell.armlinux.org.uk>
Date: Fri, 10 Feb 2023 11:03:34 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Clément Léger <clement.leger@...tlin.com>,
Clark Wang <xiaoning.wang@....com>
Cc: Sergey Shtylyov <s.shtylyov@....ru>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Wong Vee Khee <veekhee@...le.com>,
Kurt Kanzenbach <kurt@...utronix.de>,
Revanth Kumar Uppala <ruppala@...dia.com>,
Tan Tee Min <tee.min.tan@...ux.intel.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Herve Codina <herve.codina@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
Milan Stevanovic <milan.stevanovic@...com>,
Jimmy Lalande <jimmy.lalande@...com>,
Pascal Eberhard <pascal.eberhard@...com>,
Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>,
Jon Hunter <jonathanh@...dia.com>, netdev@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next 3/6] net: stmmac: start phylink before setting
up hardware
On Tue, Feb 07, 2023 at 03:41:35PM +0100, Clément Léger wrote:
> Le Mon, 16 Jan 2023 10:53:49 +0000,
> "Russell King (Oracle)" <linux@...linux.org.uk> a écrit :
>
> > On Mon, Jan 16, 2023 at 11:39:23AM +0100, Clément Léger wrote:
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > index f2247b8cf0a3..88c941003855 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > @@ -3818,6 +3818,12 @@ static int __stmmac_open(struct net_device *dev,
> > > }
> > > }
> > >
> > > + /* We need to setup the phy & PCS before accessing the stmmac registers
> > > + * because in some cases (RZ/N1), if the stmmac IP is not clocked by the
> > > + * PCS, hardware init will fail because it lacks a RGMII RX clock.
> > > + */
> > > + phylink_start(priv->phylink);
> >
> > So what happens if you end up with the mac_link_up method being called
> > at this point in the driver, before the hardware has been setup ?
> >
> > If you use a fixed-link, that's a real possibility.
>
> I actually have this setup. On the board, one GMAC is connected to a
> DSA switch using a fixed-link and the other using the PCS such as added
> by this series.
>
> From what I see, indeed, the mac_link_up() function is called before
> stmmac_hw_setup(). This does not seems to have any effect on my setup
> (except making it working of course) but I agree this is clearly not
> ideal.
>
> What I could do is adding a function in the miic pcs driver that could
> be called from my rzn1 stmmac probe function to actually configure the
> PCS at probe time based on the detected "phy-mode". Does that seems
> better to you ?
I think Clark Wang is also working on addressing a very similar problem
with stmmac. Please can you check out his work first, he's adding a new
function to phylink to bring the PHY up early in the resume path.
I would like you both to work together to address what seems to be the
same issue.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists