[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230210170958.qpzvcrkum7eehdcx@ripper>
Date: Fri, 10 Feb 2023 09:09:58 -0800
From: Bjorn Andersson <andersson@...nel.org>
To: Steev Klimaszewski <steev@...i.org>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Sven Peter <sven@...npeter.dev>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-bluetooth@...r.kernel.org,
Mark Pearson <markpearson@...ovo.com>,
Tim Jiang <quic_tjiang@...cinc.com>
Subject: Re: [PATCH v5 0/4] Add WCN6855 Bluetooth support
On Wed, Feb 08, 2023 at 08:09:12PM -0600, Steev Klimaszewski wrote:
> First things first, I do not have access to the specs nor the schematics, so a
> lot of this was done via guess work, looking at the acpi tables, and looking at
> how a similar device (wcn6750) was added.
>
> The 5th revision addresses comments from Luiz about the Bluetooth driver, as
> well as Konrad's comments on the dts file.
>
> The end result is that we do have a working device, but not entirely reliable.
>
Except for the one warning/error about frame assembly I've not seen any
reliability issues with this series.
> Hopefully by getting this out there, people who do have access to the specs or
> schematics can see where the improvements or fixes need to come.
>
> There are a few things that I am not sure why they happen, and don't have the
> knowledge level to figure out why they happen or debugging it.
>
> Bluetooth: hci0: setting up wcn6855
> Bluetooth: hci0: Frame reassembly failed (-84)
> Bluetooth: hci0: QCA Product ID :0x00000013
> Bluetooth: hci0: QCA SOC Version :0x400c0210
> Bluetooth: hci0: QCA ROM Version :0x00000201
> Bluetooth: hci0: QCA Patch Version:0x000038e6
> Bluetooth: hci0: QCA controller version 0x02100201
> Bluetooth: hci0: QCA Downloading qca/hpbtfw21.tlv
> Bluetooth: hci0: QCA Downloading qca/hpnv21.bin
> Bluetooth: hci0: QCA setup on UART is completed
>
> I do not know why the Frame assembly failed, and modprobe -r hci_uart and then
> modprobe hci_uart does not show the same Frame assembly failed.
>
> The BD Address also seems to be incorrect, and I'm not sure what is going on
> there either.
>
Changing the public-addr after the fact works...
> Testing was done by connecting a Razer Orochi bluetooth mouse, and using it, as
> well as connecting to and using an H2GO bluetooth speaker and playing audio out
> via canberra-gtk-play as well as a couple of YouTube videos in a browser.
>
> The mouse only seems to work when < 2 ft. from the laptop, and for the speaker, only
> "A2DP Sink, codec SBC" would provide audio output, and while I could see that
> data was being sent to the speaker, it wasn't always outputting, and going >
> 4ft. away, would often disconnect.
>
With the interference from WiFi removed I have very positive results
with this, been listening to music using this for a week now without any
concerns.
Tested-by: Bjorn Andersson <andersson@...nel.org>
Regards,
Bjorn
> steev@...termute:~$ hciconfig -a
> hci0: Type: Primary Bus: UART
> BD Address: 00:00:00:00:5A:AD ACL MTU: 1024:8 SCO MTU: 240:4
> UP RUNNING PSCAN
> RX bytes:1492 acl:0 sco:0 events:126 errors:0
> TX bytes:128743 acl:0 sco:0 commands:597 errors:0
> Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF
> Link mode: PERIPHERAL ACCEPT
> Name: 'wintermute'
> Class: 0x0c010c
> Service Classes: Rendering, Capturing
> Device Class: Computer, Laptop
> HCI Version: (0xc) Revision: 0x0
> LMP Version: (0xc) Subversion: 0x46f7
> Manufacturer: Qualcomm (29)
>
> steev@...termute:~$ dmesg | grep Razer
> [ 3089.235440] input: Razer Orochi as /devices/virtual/misc/uhid/0005:1532:0056.0003/input/input11
> [ 3089.238580] hid-generic 0005:1532:0056.0003: input,hidraw2: BLUETOOTH HID v0.01 Mouse [Razer Orochi] on 00:00:00:00:5a:ad
> steev@...termute:~$ dmesg | grep H2GO
> [ 3140.959947] input: H2GO Speaker (AVRCP) as /devices/virtual/input/input12
>
> Bjorn Andersson (1):
> arm64: dts: qcom: sc8280xp: Define uart2
>
> Steev Klimaszewski (3):
> dt-bindings: net: Add WCN6855 Bluetooth
> Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
> arm64: dts: qcom: thinkpad-x13s: Add bluetooth
>
> .../net/bluetooth/qualcomm-bluetooth.yaml | 17 +++++
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 76 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++
> drivers/bluetooth/btqca.c | 9 ++-
> drivers/bluetooth/btqca.h | 10 +++
> drivers/bluetooth/hci_qca.c | 50 +++++++++---
> 6 files changed, 163 insertions(+), 13 deletions(-)
>
>
> base-commit: 4fafd96910add124586b549ad005dcd179de8a18
> --
> 2.39.1
>
Powered by blists - more mailing lists