[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <edcabef3-f440-9c15-e69f-845eb6a4de1b@broadcom.com>
Date: Tue, 14 Feb 2023 11:07:55 +0100
From: Arend van Spriel <arend.vanspriel@...adcom.com>
To: Hector Martin <marcan@...can.st>,
Arend van Spriel <aspriel@...il.com>,
Franky Lin <franky.lin@...adcom.com>,
Hante Meuleman <hante.meuleman@...adcom.com>,
Kalle Valo <kvalo@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Double Lo <double.lo@...ineon.com>
Cc: Sven Peter <sven@...npeter.dev>,
Alyssa Rosenzweig <alyssa@...enzweig.io>,
Linus Walleij <linus.walleij@...aro.org>,
asahi@...ts.linux.dev, linux-wireless@...r.kernel.org,
brcm80211-dev-list.pdl@...adcom.com,
SHA-cyfmac-dev-list@...ineon.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] brcmfmac: cfg80211: Use WSEC to set SAE password
+ Double Lo
On 2/14/2023 10:33 AM, Hector Martin wrote:
> Using the WSEC command instead of sae_password seems to be the supported
> mechanism on newer firmware, and also how the brcmdhd driver does it.
The SAE code in brcmfmac was added by Cypress/Infineon. For my BCA
devices that did not work, but this change should be verified on Cypress
hardware.
Regards,
Arend
> Signed-off-by: Hector Martin <marcan@...can.st>
> ---
> Note: must be applied after:
>
> [PATCH 06/10] brcmfmac: cfg80211: Pass the PMK in binary instead of hex
>
> Since that is reviewed and this isn't yet, I expect that will go in
> first anyway.
>
> .../broadcom/brcm80211/brcmfmac/cfg80211.c | 46 ++++++++-----------
> .../broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
> 2 files changed, 20 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> index 18e6699d4024..e4690d56e7c3 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> @@ -1682,52 +1682,44 @@ static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e)
> return reason;
> }
>
> -static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
> +static int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags)
> {
> struct brcmf_pub *drvr = ifp->drvr;
> struct brcmf_wsec_pmk_le pmk;
> int err;
>
> + if (key_len > sizeof(pmk.key)) {
> + bphy_err(drvr, "key must be less than %zu bytes\n",
> + sizeof(pmk.key));
> + return -EINVAL;
> + }
> +
> memset(&pmk, 0, sizeof(pmk));
>
> - /* pass pmk directly */
> - pmk.key_len = cpu_to_le16(pmk_len);
> - pmk.flags = cpu_to_le16(0);
> - memcpy(pmk.key, pmk_data, pmk_len);
> + /* pass key material directly */
> + pmk.key_len = cpu_to_le16(key_len);
> + pmk.flags = cpu_to_le16(flags);
> + memcpy(pmk.key, key, key_len);
>
> - /* store psk in firmware */
> + /* store key material in firmware */
> err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK,
> &pmk, sizeof(pmk));
> if (err < 0)
> bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n",
> - pmk_len);
> + key_len);
>
> return err;
> }
>
> +static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
> +{
> + return brcmf_set_wsec(ifp, pmk_data, pmk_len, 0);
> +}
> +
> static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data,
> u16 pwd_len)
> {
> - struct brcmf_pub *drvr = ifp->drvr;
> - struct brcmf_wsec_sae_pwd_le sae_pwd;
> - int err;
> -
> - if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) {
> - bphy_err(drvr, "sae_password must be less than %d\n",
> - BRCMF_WSEC_MAX_SAE_PASSWORD_LEN);
> - return -EINVAL;
> - }
> -
> - sae_pwd.key_len = cpu_to_le16(pwd_len);
> - memcpy(sae_pwd.key, pwd_data, pwd_len);
> -
> - err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd,
> - sizeof(sae_pwd));
> - if (err < 0)
> - bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n",
> - pwd_len);
> -
> - return err;
> + return brcmf_set_wsec(ifp, pwd_data, pwd_len, BRCMF_WSEC_PASSPHRASE);
> }
>
> static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason,
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
> index 792adaf880b4..3ba90878c47d 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
> @@ -574,7 +574,7 @@ struct brcmf_wsec_key_le {
> struct brcmf_wsec_pmk_le {
> __le16 key_len;
> __le16 flags;
> - u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1];
> + u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN];
> };
>
> /**
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4219 bytes)
Powered by blists - more mailing lists