lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230216190450.3901254-2-frank.jungclaus@esd.eu>
Date:   Thu, 16 Feb 2023 20:04:48 +0100
From:   Frank Jungclaus <frank.jungclaus@....eu>
To:     linux-can@...r.kernel.org, Marc Kleine-Budde <mkl@...gutronix.de>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Vincent Mailhol <mailhol.vincent@...adoo.fr>
Cc:     Stefan Mätje <stefan.maetje@....eu>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Frank Jungclaus <frank.jungclaus@....eu>
Subject: [PATCH v3 1/3] can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

Move the supply for cf->data[3] (bit stream position of CAN error), in
case of a bus- or protocol-error, outside of the "switch (ecc &
SJA1000_ECC_MASK){}"-statement, because this bit stream position is
independent of the error type.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@....eu>
---
 drivers/net/can/usb/esd_usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 42323f5e6f3a..5e182fadd875 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -286,7 +286,6 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 				cf->data[2] |= CAN_ERR_PROT_STUFF;
 				break;
 			default:
-				cf->data[3] = ecc & SJA1000_ECC_SEG;
 				break;
 			}
 
@@ -294,6 +293,9 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 			if (!(ecc & SJA1000_ECC_DIR))
 				cf->data[2] |= CAN_ERR_PROT_TX;
 
+			/* Bit stream position in CAN frame as the error was detected */
+			cf->data[3] = ecc & SJA1000_ECC_SEG;
+
 			if (priv->can.state == CAN_STATE_ERROR_WARNING ||
 			    priv->can.state == CAN_STATE_ERROR_PASSIVE) {
 				cf->data[1] = (txerr > rxerr) ?
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ