[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <ae41658a-ddf9-290d-e674-550372619b8f@gmail.com>
Date: Fri, 17 Feb 2023 09:13:30 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: "Wang, Xiaolei" <Xiaolei.Wang@...driver.com>,
"bcm-kernel-feedback-list@...adcom.com"
<bcm-kernel-feedback-list@...adcom.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>,
"richardcochran@...il.com" <richardcochran@...il.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: BCM54220: After the BCM54220 closes the auto-negotiation, the
configuration forces the 1000M network port to be linked down all the time.
On 2/17/23 00:06, Wang, Xiaolei wrote:
> hi
>
> When I use the nxp-imx7 board, eth0 is connected to the PC, eth0 is
> turned off the auto-negotiation mode, and the configuration is forced to
> 10M, 100M, 1000M. When configured to force 1000M,
> The link status of phy status reg(0x1) is always 0, and the chip of
> phy is BCM54220, but I did not find the relevant datasheet on BCM
> official website, does anyone have any suggestions or the datasheet of
> BCM54220?
I don't have access to a system with a BCM54220 but can look at the
datasheet, could you provide the full output of mii-diag in both cases?
What do the PC report as far as link partner advertisement goes etc.?
You are using a twister pair cable to connect your two systems?
--
Florian
Powered by blists - more mailing lists