netdev - [PATCH RFC 18/18] net: usb: lan78xx: Fixup EEE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230217034230.1249661-19-andrew@lunn.ch>
Date:   Fri, 17 Feb 2023 04:42:30 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     netdev <netdev@...r.kernel.org>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Doug Berger <opendmb@...il.com>,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@...adcom.com>,
        Wei Fang <wei.fang@....com>,
        Shenwei Wang <shenwei.wang@....com>,
        Clark Wang <xiaoning.wang@....com>,
        NXP Linux Team <linux-imx@....com>,
        UNGLinuxDriver@...rochip.com, Byungho An <bh74.an@...sung.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <rmk+kernel@...linux.org.uk>,
        Woojung Huh <woojung.huh@...rochip.com>,
        Oleksij Rempel <linux@...pel-privat.de>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH RFC 18/18] net: usb: lan78xx: Fixup EEE

The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan783xx_phy_link_status_change() which gets called by phylib when
there is a change in link status.

lan78xx_set_eee() now just programs the hardware with the LTI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.

lan743x_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LTI timer value, and tx_lpi_enabled based on
if EEE is active.

Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/usb/lan78xx.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index f18ab8e220db..a06eac83cc01 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1690,16 +1690,11 @@ static int lan78xx_get_eee(struct net_device *net, struct ethtool_eee *edata)
 
 	ret = lan78xx_read_reg(dev, MAC_CR, &buf);
 	if (buf & MAC_CR_EEE_EN_) {
-		edata->eee_enabled = true;
-		edata->eee_active = !!(edata->advertised &
-				       edata->lp_advertised);
 		edata->tx_lpi_enabled = true;
 		/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
 		ret = lan78xx_read_reg(dev, EEE_TX_LPI_REQ_DLY, &buf);
 		edata->tx_lpi_timer = buf;
 	} else {
-		edata->eee_enabled = false;
-		edata->eee_active = false;
 		edata->tx_lpi_enabled = false;
 		edata->tx_lpi_timer = 0;
 	}
@@ -1721,24 +1716,16 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
 	if (ret < 0)
 		return ret;
 
-	if (edata->eee_enabled) {
-		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
-		buf |= MAC_CR_EEE_EN_;
-		ret = lan78xx_write_reg(dev, MAC_CR, buf);
-
-		phy_ethtool_set_eee(net->phydev, edata);
-
-		buf = (u32)edata->tx_lpi_timer;
-		ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
-	} else {
-		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
-		buf &= ~MAC_CR_EEE_EN_;
-		ret = lan78xx_write_reg(dev, MAC_CR, buf);
-	}
+	ret = phy_ethtool_set_eee(net->phydev, edata);
+	if (ret < 0)
+		goto out;
 
+	buf = (u32)edata->tx_lpi_timer;
+	ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
+out:
 	usb_autopm_put_interface(dev->intf);
 
-	return 0;
+	return ret;
 }
 
 static u32 lan78xx_get_link(struct net_device *net)
@@ -2114,8 +2101,10 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev)
 
 static void lan78xx_link_status_change(struct net_device *net)
 {
+	struct lan78xx_net *dev = netdev_priv(net);
 	struct phy_device *phydev = net->phydev;
 	int temp;
+	u32 data;
 
 	/* At forced 100 F/H mode, chip may fail to set mode correctly
 	 * when cable is switched between long(~50+m) and short one.
@@ -2142,6 +2131,13 @@ static void lan78xx_link_status_change(struct net_device *net)
 		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
 		phy_write(phydev, LAN88XX_INT_MASK, temp);
 	}
+
+	lan78xx_read_reg(dev, MAC_CR, &data);
+	if (phydev->eee_active)
+		data |=  MAC_CR_EEE_EN_;
+	else
+		data &= ~MAC_CR_EEE_EN_;
+	lan78xx_write_reg(dev, MAC_CR, data);
 }
 
 static int irq_map(struct irq_domain *d, unsigned int irq,
-- 
2.39.1