| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230227133457.431729-2-arnd@kernel.org>
Date: Mon, 27 Feb 2023 14:34:52 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: Dominik Brodowski <linux@...inikbrodowski.net>,
linux-kernel@...r.kernel.org
Cc: Arnd Bergmann <arnd@...db.de>, Bjorn Helgaas <bhelgaas@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
Ian Abbott <abbotti@....co.uk>,
Jakub Kicinski <kuba@...nel.org>,
Kevin Cernekee <cernekee@...il.com>,
Lukas Wunner <lukas@...ner.de>,
Manuel Lauss <manuel.lauss@...il.com>,
Oliver Hartkopp <socketcan@...tkopp.net>,
Olof Johansson <olof@...om.net>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
YOKOTA Hiroshi <yokota@...lab.is.tsukuba.ac.jp>,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-can@...r.kernel.org,
linux-mips@...r.kernel.org, linux-pci@...r.kernel.org,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org
Subject: [RFC 1/6] pccard: remove bcm63xx socket driver
From: Arnd Bergmann <arnd@...db.de>
The bcm63xx pcmcia driver is the only nonstandard cardbus implementation,
everything else is handled by the yenta_socket driver. Upon a closer
look, this seems entirely unused, because:
- There are two ports for bcm63xx in arch/mips, both of which
support the bcm6358 hardware, but the newer one does not
use this driver at all.
- The only distro I could find for bcm63xx is OpenWRT, but they
do not enable pcmcia support. However they have 130 patches,
a lot of which are likely required to run anything at all.
- The device list at https://deviwiki.com/wiki/Broadcom only
lists machines using mini-PCI cards rather than PCMCIA or
Cardbus devices.
- The cardbus support is entirely made up to work with the
kernel subsystem, but the hardware appears to just be a normal
PCI host that should work fine after removing all the cardbus
code.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/mips/bcm63xx/Makefile | 2 +-
arch/mips/bcm63xx/boards/board_bcm963xx.c | 14 -
arch/mips/bcm63xx/dev-pcmcia.c | 144 -----
arch/mips/configs/bcm63xx_defconfig | 1 -
.../asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 14 -
arch/mips/pci/ops-bcm63xx.c | 294 ----------
arch/mips/pci/pci-bcm63xx.c | 44 --
drivers/pcmcia/Kconfig | 4 -
drivers/pcmcia/Makefile | 1 -
drivers/pcmcia/bcm63xx_pcmcia.c | 538 ------------------
drivers/pcmcia/bcm63xx_pcmcia.h | 61 --
11 files changed, 1 insertion(+), 1116 deletions(-)
delete mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
delete mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c
delete mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index d89651e538f6..fccaeeee757d 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
- setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \
+ setup.o timer.o dev-enet.o dev-flash.o \
dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \
dev-usb-usbd.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 01aff80a5967..d88d3043a288 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -22,7 +22,6 @@
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_flash.h>
#include <bcm63xx_dev_hsspi.h>
-#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_dev_spi.h>
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
@@ -266,7 +265,6 @@ static struct board_info __initdata board_96348gw_10 = {
.expected_cpu_id = 0x6348,
.has_ohci0 = 1,
- .has_pccard = 1,
.has_pci = 1,
.has_uart0 = 1,
@@ -317,7 +315,6 @@ static struct board_info __initdata board_96348gw_11 = {
.expected_cpu_id = 0x6348,
.has_ohci0 = 1,
- .has_pccard = 1,
.has_pci = 1,
.has_uart0 = 1,
@@ -418,7 +415,6 @@ static struct board_info __initdata board_FAST2404 = {
.expected_cpu_id = 0x6348,
.has_ohci0 = 1,
- .has_pccard = 1,
.has_pci = 1,
.has_uart0 = 1,
@@ -507,7 +503,6 @@ static struct board_info __initdata board_96358vw = {
.has_ehci0 = 1,
.has_ohci0 = 1,
- .has_pccard = 1,
.has_pci = 1,
.has_uart0 = 1,
@@ -557,7 +552,6 @@ static struct board_info __initdata board_96358vw2 = {
.has_ehci0 = 1,
.has_ohci0 = 1,
- .has_pccard = 1,
.has_pci = 1,
.has_uart0 = 1,
@@ -807,11 +801,6 @@ void __init board_prom_init(void)
}
#endif /* CONFIG_PCI */
- if (board.has_pccard) {
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G1_MII_PCCARD;
- }
-
if (board.has_enet0 && !board.enet0.use_internal_phy) {
if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G3_EXT_MII |
@@ -861,9 +850,6 @@ int __init board_register_devices(void)
if (board.has_uart1)
bcm63xx_uart_register(1);
- if (board.has_pccard)
- bcm63xx_pcmcia_register();
-
if (board.has_enet0 &&
!bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
deleted file mode 100644
index 9496cd236951..000000000000
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Maxime Bizon <mbizon@...ebox.fr>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/bootinfo.h>
-#include <linux/platform_device.h>
-#include <bcm63xx_cs.h>
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_dev_pcmcia.h>
-#include <bcm63xx_io.h>
-#include <bcm63xx_regs.h>
-
-static struct resource pcmcia_resources[] = {
- /* pcmcia registers */
- {
- /* start & end filled at runtime */
- .flags = IORESOURCE_MEM,
- },
-
- /* pcmcia memory zone resources */
- {
- .start = BCM_PCMCIA_COMMON_BASE_PA,
- .end = BCM_PCMCIA_COMMON_END_PA,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = BCM_PCMCIA_ATTR_BASE_PA,
- .end = BCM_PCMCIA_ATTR_END_PA,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = BCM_PCMCIA_IO_BASE_PA,
- .end = BCM_PCMCIA_IO_END_PA,
- .flags = IORESOURCE_MEM,
- },
-
- /* PCMCIA irq */
- {
- /* start filled at runtime */
- .flags = IORESOURCE_IRQ,
- },
-
- /* declare PCMCIA IO resource also */
- {
- .start = BCM_PCMCIA_IO_BASE_PA,
- .end = BCM_PCMCIA_IO_END_PA,
- .flags = IORESOURCE_IO,
- },
-};
-
-static struct bcm63xx_pcmcia_platform_data pd;
-
-static struct platform_device bcm63xx_pcmcia_device = {
- .name = "bcm63xx_pcmcia",
- .id = 0,
- .num_resources = ARRAY_SIZE(pcmcia_resources),
- .resource = pcmcia_resources,
- .dev = {
- .platform_data = &pd,
- },
-};
-
-static int __init config_pcmcia_cs(unsigned int cs,
- u32 base, unsigned int size)
-{
- int ret;
-
- ret = bcm63xx_set_cs_status(cs, 0);
- if (!ret)
- ret = bcm63xx_set_cs_base(cs, base, size);
- if (!ret)
- ret = bcm63xx_set_cs_status(cs, 1);
- return ret;
-}
-
-static const struct {
- unsigned int cs;
- unsigned int base;
- unsigned int size;
-} pcmcia_cs[3] __initconst = {
- {
- .cs = MPI_CS_PCMCIA_COMMON,
- .base = BCM_PCMCIA_COMMON_BASE_PA,
- .size = BCM_PCMCIA_COMMON_SIZE
- },
- {
- .cs = MPI_CS_PCMCIA_ATTR,
- .base = BCM_PCMCIA_ATTR_BASE_PA,
- .size = BCM_PCMCIA_ATTR_SIZE
- },
- {
- .cs = MPI_CS_PCMCIA_IO,
- .base = BCM_PCMCIA_IO_BASE_PA,
- .size = BCM_PCMCIA_IO_SIZE
- },
-};
-
-int __init bcm63xx_pcmcia_register(void)
-{
- int ret, i;
-
- if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
- return 0;
-
- /* use correct pcmcia ready gpio depending on processor */
- switch (bcm63xx_get_cpu_id()) {
- case BCM6348_CPU_ID:
- pd.ready_gpio = 22;
- break;
-
- case BCM6358_CPU_ID:
- pd.ready_gpio = 18;
- break;
-
- default:
- return -ENODEV;
- }
-
- pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
- pcmcia_resources[0].end = pcmcia_resources[0].start +
- RSET_PCMCIA_SIZE - 1;
- pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
-
- /* configure pcmcia chip selects */
- for (i = 0; i < 3; i++) {
- ret = config_pcmcia_cs(pcmcia_cs[i].cs,
- pcmcia_cs[i].base,
- pcmcia_cs[i].size);
- if (ret)
- goto out_err;
- }
-
- return platform_device_register(&bcm63xx_pcmcia_device);
-
-out_err:
- pr_err("unable to set pcmcia chip select\n");
- return ret;
-}
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 34d0ca638ef0..d1a185c20f00 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -19,7 +19,6 @@ CONFIG_BCM63XX_CPU_6358=y
# CONFIG_SECCOMP is not set
CONFIG_PCI=y
CONFIG_PCCARD=y
-CONFIG_PCMCIA_BCM63XX=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_UNIX=y
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
deleted file mode 100644
index 01674ac58bb5..000000000000
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef BCM63XX_DEV_PCMCIA_H_
-#define BCM63XX_DEV_PCMCIA_H_
-
-/*
- * PCMCIA driver platform data
- */
-struct bcm63xx_pcmcia_platform_data {
- unsigned int ready_gpio;
-};
-
-int bcm63xx_pcmcia_register(void);
-
-#endif /* BCM63XX_DEV_PCMCIA_H_ */
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index dc6dc2741272..4cb6185a9f66 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -151,9 +151,6 @@ static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
type = bus->parent ? 1 : 0;
- if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return bcm63xx_do_cfg_read(type, bus->number, devfn,
where, size, val);
}
@@ -165,9 +162,6 @@ static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
type = bus->parent ? 1 : 0;
- if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return bcm63xx_do_cfg_write(type, bus->number, devfn,
where, size, val);
}
@@ -177,294 +171,6 @@ struct pci_ops bcm63xx_pci_ops = {
.write = bcm63xx_pci_write
};
-#ifdef CONFIG_CARDBUS
-/*
- * emulate configuration read access on a cardbus bridge
- */
-#define FAKE_CB_BRIDGE_SLOT 0x1e
-
-static int fake_cb_bridge_bus_number = -1;
-
-static struct {
- u16 pci_command;
- u8 cb_latency;
- u8 subordinate_busn;
- u8 cardbus_busn;
- u8 pci_busn;
- int bus_assigned;
- u16 bridge_control;
-
- u32 mem_base0;
- u32 mem_limit0;
- u32 mem_base1;
- u32 mem_limit1;
-
- u32 io_base0;
- u32 io_limit0;
- u32 io_base1;
- u32 io_limit1;
-} fake_cb_bridge_regs;
-
-static int fake_cb_bridge_read(int where, int size, u32 *val)
-{
- unsigned int reg;
- u32 data;
-
- data = 0;
- reg = where >> 2;
- switch (reg) {
- case (PCI_VENDOR_ID >> 2):
- case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
- /* create dummy vendor/device id from our cpu id */
- data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
- break;
-
- case (PCI_COMMAND >> 2):
- data = (PCI_STATUS_DEVSEL_SLOW << 16);
- data |= fake_cb_bridge_regs.pci_command;
- break;
-
- case (PCI_CLASS_REVISION >> 2):
- data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
- break;
-
- case (PCI_CACHE_LINE_SIZE >> 2):
- data = (PCI_HEADER_TYPE_CARDBUS << 16);
- break;
-
- case (PCI_INTERRUPT_LINE >> 2):
- /* bridge control */
- data = (fake_cb_bridge_regs.bridge_control << 16);
- /* pin:intA line:0xff */
- data |= (0x1 << 8) | 0xff;
- break;
-
- case (PCI_CB_PRIMARY_BUS >> 2):
- data = (fake_cb_bridge_regs.cb_latency << 24);
- data |= (fake_cb_bridge_regs.subordinate_busn << 16);
- data |= (fake_cb_bridge_regs.cardbus_busn << 8);
- data |= fake_cb_bridge_regs.pci_busn;
- break;
-
- case (PCI_CB_MEMORY_BASE_0 >> 2):
- data = fake_cb_bridge_regs.mem_base0;
- break;
-
- case (PCI_CB_MEMORY_LIMIT_0 >> 2):
- data = fake_cb_bridge_regs.mem_limit0;
- break;
-
- case (PCI_CB_MEMORY_BASE_1 >> 2):
- data = fake_cb_bridge_regs.mem_base1;
- break;
-
- case (PCI_CB_MEMORY_LIMIT_1 >> 2):
- data = fake_cb_bridge_regs.mem_limit1;
- break;
-
- case (PCI_CB_IO_BASE_0 >> 2):
- /* | 1 for 32bits io support */
- data = fake_cb_bridge_regs.io_base0 | 0x1;
- break;
-
- case (PCI_CB_IO_LIMIT_0 >> 2):
- data = fake_cb_bridge_regs.io_limit0;
- break;
-
- case (PCI_CB_IO_BASE_1 >> 2):
- /* | 1 for 32bits io support */
- data = fake_cb_bridge_regs.io_base1 | 0x1;
- break;
-
- case (PCI_CB_IO_LIMIT_1 >> 2):
- data = fake_cb_bridge_regs.io_limit1;
- break;
- }
-
- *val = postprocess_read(data, where, size);
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * emulate configuration write access on a cardbus bridge
- */
-static int fake_cb_bridge_write(int where, int size, u32 val)
-{
- unsigned int reg;
- u32 data, tmp;
- int ret;
-
- ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- return ret;
-
- data = preprocess_write(data, val, where, size);
-
- reg = where >> 2;
- switch (reg) {
- case (PCI_COMMAND >> 2):
- fake_cb_bridge_regs.pci_command = (data & 0xffff);
- break;
-
- case (PCI_CB_PRIMARY_BUS >> 2):
- fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
- fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
- fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
- fake_cb_bridge_regs.pci_busn = data & 0xff;
- if (fake_cb_bridge_regs.cardbus_busn)
- fake_cb_bridge_regs.bus_assigned = 1;
- break;
-
- case (PCI_INTERRUPT_LINE >> 2):
- tmp = (data >> 16) & 0xffff;
- /* disable memory prefetch support */
- tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
- tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
- fake_cb_bridge_regs.bridge_control = tmp;
- break;
-
- case (PCI_CB_MEMORY_BASE_0 >> 2):
- fake_cb_bridge_regs.mem_base0 = data;
- break;
-
- case (PCI_CB_MEMORY_LIMIT_0 >> 2):
- fake_cb_bridge_regs.mem_limit0 = data;
- break;
-
- case (PCI_CB_MEMORY_BASE_1 >> 2):
- fake_cb_bridge_regs.mem_base1 = data;
- break;
-
- case (PCI_CB_MEMORY_LIMIT_1 >> 2):
- fake_cb_bridge_regs.mem_limit1 = data;
- break;
-
- case (PCI_CB_IO_BASE_0 >> 2):
- fake_cb_bridge_regs.io_base0 = data;
- break;
-
- case (PCI_CB_IO_LIMIT_0 >> 2):
- fake_cb_bridge_regs.io_limit0 = data;
- break;
-
- case (PCI_CB_IO_BASE_1 >> 2):
- fake_cb_bridge_regs.io_base1 = data;
- break;
-
- case (PCI_CB_IO_LIMIT_1 >> 2):
- fake_cb_bridge_regs.io_limit1 = data;
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- /* snoop access to slot 0x1e on root bus, we fake a cardbus
- * bridge at this location */
- if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
- fake_cb_bridge_bus_number = bus->number;
- return fake_cb_bridge_read(where, size, val);
- }
-
- /* a configuration cycle for the device behind the cardbus
- * bridge is actually done as a type 0 cycle on the primary
- * bus. This means that only one device can be on the cardbus
- * bus */
- if (fake_cb_bridge_regs.bus_assigned &&
- bus->number == fake_cb_bridge_regs.cardbus_busn &&
- PCI_SLOT(devfn) == 0)
- return bcm63xx_do_cfg_read(0, 0,
- PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
- where, size, val);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
- fake_cb_bridge_bus_number = bus->number;
- return fake_cb_bridge_write(where, size, val);
- }
-
- if (fake_cb_bridge_regs.bus_assigned &&
- bus->number == fake_cb_bridge_regs.cardbus_busn &&
- PCI_SLOT(devfn) == 0)
- return bcm63xx_do_cfg_write(0, 0,
- PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
- where, size, val);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-struct pci_ops bcm63xx_cb_ops = {
- .read = bcm63xx_cb_read,
- .write = bcm63xx_cb_write,
-};
-
-/*
- * only one IO window, so it cannot be shared by PCI and cardbus, use
- * fixup to choose and detect unhandled configuration
- */
-static void bcm63xx_fixup(struct pci_dev *dev)
-{
- static int io_window = -1;
- int i, found, new_io_window;
- u32 val;
-
- /* look for any io resource */
- found = 0;
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
- found = 1;
- break;
- }
- }
-
- if (!found)
- return;
-
- /* skip our fake bus with only cardbus bridge on it */
- if (dev->bus->number == fake_cb_bridge_bus_number)
- return;
-
- /* find on which bus the device is */
- if (fake_cb_bridge_regs.bus_assigned &&
- dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
- PCI_SLOT(dev->devfn) == 0)
- new_io_window = 1;
- else
- new_io_window = 0;
-
- if (new_io_window == io_window)
- return;
-
- if (io_window != -1) {
- printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
- "need IO, which hardware cannot do\n");
- return;
- }
-
- printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
- (new_io_window == 0) ? "PCI" : "cardbus");
-
- val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
- if (io_window)
- val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
- else
- val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
- bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
-
- io_window = new_io_window;
-}
-
-DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
-#endif
-
static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
{
switch (bus->number) {
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
index ac83243772d2..ebe062b149f6 100644
--- a/arch/mips/pci/pci-bcm63xx.c
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -34,11 +34,7 @@ static struct resource bcm_pci_mem_resource = {
static struct resource bcm_pci_io_resource = {
.name = "bcm63xx PCI IO space",
.start = BCM_PCI_IO_BASE_PA,
-#ifdef CONFIG_CARDBUS
- .end = BCM_PCI_IO_HALF_PA,
-#else
.end = BCM_PCI_IO_END_PA,
-#endif
.flags = IORESOURCE_IO
};
@@ -48,33 +44,6 @@ struct pci_controller bcm63xx_controller = {
.mem_resource = &bcm_pci_mem_resource,
};
-/*
- * We handle cardbus via a fake Cardbus bridge, memory and io spaces
- * have to be clearly separated from PCI one since we have different
- * memory decoder.
- */
-#ifdef CONFIG_CARDBUS
-static struct resource bcm_cb_mem_resource = {
- .name = "bcm63xx Cardbus memory space",
- .start = BCM_CB_MEM_BASE_PA,
- .end = BCM_CB_MEM_END_PA,
- .flags = IORESOURCE_MEM
-};
-
-static struct resource bcm_cb_io_resource = {
- .name = "bcm63xx Cardbus IO space",
- .start = BCM_PCI_IO_HALF_PA + 1,
- .end = BCM_PCI_IO_END_PA,
- .flags = IORESOURCE_IO
-};
-
-struct pci_controller bcm63xx_cb_controller = {
- .pci_ops = &bcm63xx_cb_ops,
- .io_resource = &bcm_cb_io_resource,
- .mem_resource = &bcm_cb_mem_resource,
-};
-#endif
-
static struct resource bcm_pcie_mem_resource = {
.name = "bcm63xx PCIe memory space",
.start = BCM_PCIE_MEM_BASE_PA,
@@ -238,17 +207,8 @@ static int __init bcm63xx_register_pci(void)
val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
bcm_pcmcia_writel(val, PCMCIA_C1_REG);
-#ifdef CONFIG_CARDBUS
- /* setup local bus to PCI access (Cardbus memory) */
- val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
- bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
- bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
- val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
- bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
-#else
/* disable second access windows */
bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
-#endif
/* setup local bus to PCI access (IO memory), we have only 1
* IO window for both PCI and cardbus, but it cannot handle
@@ -318,10 +278,6 @@ static int __init bcm63xx_register_pci(void)
register_pci_controller(&bcm63xx_controller);
-#ifdef CONFIG_CARDBUS
- register_pci_controller(&bcm63xx_cb_controller);
-#endif
-
/* mark memory space used for IO mapping as reserved */
request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
"bcm63xx PCI IO space");
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 1525023e49b6..26c89eefa18e 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -168,10 +168,6 @@ config PCMCIA_XXS1500
This driver is also available as a module called xxs1500_ss.ko
-config PCMCIA_BCM63XX
- tristate "bcm63xx pcmcia support"
- depends on BCM63XX && PCMCIA
-
config PCMCIA_SOC_COMMON
tristate
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index b3a2accf47af..67d447c62b8d 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -28,7 +28,6 @@ obj-$(CONFIG_PCMCIA_SOC_COMMON) += soc_common.o
obj-$(CONFIG_PCMCIA_SA11XX_BASE) += sa11xx_base.o
obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
obj-$(CONFIG_PCMCIA_SA1111) += sa1111_cs.o
-obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
obj-$(CONFIG_OMAP_CF) += omap_cf.o
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
deleted file mode 100644
index dd3c26099048..000000000000
--- a/drivers/pcmcia/bcm63xx_pcmcia.c
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Maxime Bizon <mbizon@...ebox.fr>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/gpio.h>
-
-#include <bcm63xx_regs.h>
-#include <bcm63xx_io.h>
-#include "bcm63xx_pcmcia.h"
-
-#define PFX "bcm63xx_pcmcia: "
-
-#ifdef CONFIG_CARDBUS
-/* if cardbus is used, platform device needs reference to actual pci
- * device */
-static struct pci_dev *bcm63xx_cb_dev;
-#endif
-
-/*
- * read/write helper for pcmcia regs
- */
-static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
-{
- return bcm_readl(skt->base + off);
-}
-
-static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
- u32 val, u32 off)
-{
- bcm_writel(val, skt->base + off);
-}
-
-/*
- * This callback should (re-)initialise the socket, turn on status
- * interrupts and PCMCIA bus, and wait for power to stabilise so that
- * the card status signals report correctly.
- *
- * Hardware cannot do that.
- */
-static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
-{
- return 0;
-}
-
-/*
- * This callback should remove power on the socket, disable IRQs from
- * the card, turn off status interrupts, and disable the PCMCIA bus.
- *
- * Hardware cannot do that.
- */
-static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
-{
- return 0;
-}
-
-/*
- * Implements the set_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_SetSocket in Card Services). We more or
- * less punt all of this work and let the kernel handle the details
- * of power configuration, reset, &c. We also record the value of
- * `state' in order to regurgitate it to the PCMCIA core later.
- */
-static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
- socket_state_t *state)
-{
- struct bcm63xx_pcmcia_socket *skt;
- unsigned long flags;
- u32 val;
-
- skt = sock->driver_data;
-
- spin_lock_irqsave(&skt->lock, flags);
-
- /* note: hardware cannot control socket power, so we will
- * always report SS_POWERON */
-
- /* apply socket reset */
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
- if (state->flags & SS_RESET)
- val |= PCMCIA_C1_RESET_MASK;
- else
- val &= ~PCMCIA_C1_RESET_MASK;
-
- /* reverse reset logic for cardbus card */
- if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
- val ^= PCMCIA_C1_RESET_MASK;
-
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
-
- /* keep requested state for event reporting */
- skt->requested_state = *state;
-
- spin_unlock_irqrestore(&skt->lock, flags);
-
- return 0;
-}
-
-/*
- * identity cardtype from VS[12] input, CD[12] input while only VS2 is
- * floating, and CD[12] input while only VS1 is floating
- */
-enum {
- IN_VS1 = (1 << 0),
- IN_VS2 = (1 << 1),
- IN_CD1_VS2H = (1 << 2),
- IN_CD2_VS2H = (1 << 3),
- IN_CD1_VS1H = (1 << 4),
- IN_CD2_VS1H = (1 << 5),
-};
-
-static const u8 vscd_to_cardtype[] = {
-
- /* VS1 float, VS2 float */
- [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
-
- /* VS1 grounded, VS2 float */
- [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
-
- /* VS1 grounded, VS2 grounded */
- [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
-
- /* VS1 tied to CD1, VS2 float */
- [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
-
- /* VS1 grounded, VS2 tied to CD2 */
- [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
-
- /* VS1 tied to CD2, VS2 grounded */
- [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
-
- /* VS1 float, VS2 grounded */
- [IN_VS1] = (CARD_PCCARD | CARD_XV),
-
- /* VS1 float, VS2 tied to CD2 */
- [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
-
- /* VS1 float, VS2 tied to CD1 */
- [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
-
- /* VS1 tied to CD2, VS2 float */
- [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
-
- /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
- [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
-};
-
-/*
- * poll hardware to check card insertion status
- */
-static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
-{
- unsigned int stat;
- u32 val;
-
- stat = 0;
-
- /* check CD for card presence */
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
-
- if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
- stat |= SS_DETECT;
-
- /* if new insertion, detect cardtype */
- if ((stat & SS_DETECT) && !skt->card_detected) {
- unsigned int stat = 0;
-
- /* float VS1, float VS2 */
- val |= PCMCIA_C1_VS1OE_MASK;
- val |= PCMCIA_C1_VS2OE_MASK;
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
-
- /* wait for output to stabilize and read VS[12] */
- udelay(10);
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
- stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
- stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
-
- /* drive VS1 low, float VS2 */
- val &= ~PCMCIA_C1_VS1OE_MASK;
- val |= PCMCIA_C1_VS2OE_MASK;
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
-
- /* wait for output to stabilize and read CD[12] */
- udelay(10);
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
- stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
- stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
-
- /* float VS1, drive VS2 low */
- val |= PCMCIA_C1_VS1OE_MASK;
- val &= ~PCMCIA_C1_VS2OE_MASK;
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
-
- /* wait for output to stabilize and read CD[12] */
- udelay(10);
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
- stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
- stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
-
- /* guess cardtype from all this */
- skt->card_type = vscd_to_cardtype[stat];
- if (!skt->card_type)
- dev_err(&skt->socket.dev, "unsupported card type\n");
-
- /* drive both VS pin to 0 again */
- val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
-
- /* enable correct logic */
- val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
- if (skt->card_type & CARD_PCCARD)
- val |= PCMCIA_C1_EN_PCMCIA_MASK;
- else
- val |= PCMCIA_C1_EN_CARDBUS_MASK;
-
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
- }
- skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
-
- /* report card type/voltage */
- if (skt->card_type & CARD_CARDBUS)
- stat |= SS_CARDBUS;
- if (skt->card_type & CARD_3V)
- stat |= SS_3VCARD;
- if (skt->card_type & CARD_XV)
- stat |= SS_XVCARD;
- stat |= SS_POWERON;
-
- if (gpio_get_value(skt->pd->ready_gpio))
- stat |= SS_READY;
-
- return stat;
-}
-
-/*
- * core request to get current socket status
- */
-static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
- unsigned int *status)
-{
- struct bcm63xx_pcmcia_socket *skt;
-
- skt = sock->driver_data;
-
- spin_lock_bh(&skt->lock);
- *status = __get_socket_status(skt);
- spin_unlock_bh(&skt->lock);
-
- return 0;
-}
-
-/*
- * socket polling timer callback
- */
-static void bcm63xx_pcmcia_poll(struct timer_list *t)
-{
- struct bcm63xx_pcmcia_socket *skt;
- unsigned int stat, events;
-
- skt = from_timer(skt, t, timer);
-
- spin_lock_bh(&skt->lock);
-
- stat = __get_socket_status(skt);
-
- /* keep only changed bits, and mask with required one from the
- * core */
- events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
- skt->old_status = stat;
- spin_unlock_bh(&skt->lock);
-
- if (events)
- pcmcia_parse_events(&skt->socket, events);
-
- mod_timer(&skt->timer,
- jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
-}
-
-static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
- struct pccard_io_map *map)
-{
- /* this doesn't seem to be called by pcmcia layer if static
- * mapping is used */
- return 0;
-}
-
-static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
- struct pccard_mem_map *map)
-{
- struct bcm63xx_pcmcia_socket *skt;
- struct resource *res;
-
- skt = sock->driver_data;
- if (map->flags & MAP_ATTRIB)
- res = skt->attr_res;
- else
- res = skt->common_res;
-
- map->static_start = res->start + map->card_start;
- return 0;
-}
-
-static struct pccard_operations bcm63xx_pcmcia_operations = {
- .init = bcm63xx_pcmcia_sock_init,
- .suspend = bcm63xx_pcmcia_suspend,
- .get_status = bcm63xx_pcmcia_get_status,
- .set_socket = bcm63xx_pcmcia_set_socket,
- .set_io_map = bcm63xx_pcmcia_set_io_map,
- .set_mem_map = bcm63xx_pcmcia_set_mem_map,
-};
-
-/*
- * register pcmcia socket to core
- */
-static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
-{
- struct bcm63xx_pcmcia_socket *skt;
- struct pcmcia_socket *sock;
- struct resource *res;
- unsigned int regmem_size = 0, iomem_size = 0;
- u32 val;
- int ret;
- int irq;
-
- skt = kzalloc(sizeof(*skt), GFP_KERNEL);
- if (!skt)
- return -ENOMEM;
- spin_lock_init(&skt->lock);
- sock = &skt->socket;
- sock->driver_data = skt;
-
- /* make sure we have all resources we need */
- skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- irq = platform_get_irq(pdev, 0);
- skt->pd = pdev->dev.platform_data;
- if (!skt->common_res || !skt->attr_res || (irq < 0) || !skt->pd) {
- ret = -EINVAL;
- goto err;
- }
-
- /* remap pcmcia registers */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- regmem_size = resource_size(res);
- if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
- ret = -EINVAL;
- goto err;
- }
- skt->reg_res = res;
-
- skt->base = ioremap(res->start, regmem_size);
- if (!skt->base) {
- ret = -ENOMEM;
- goto err;
- }
-
- /* remap io registers */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
- iomem_size = resource_size(res);
- skt->io_base = ioremap(res->start, iomem_size);
- if (!skt->io_base) {
- ret = -ENOMEM;
- goto err;
- }
-
- /* resources are static */
- sock->resource_ops = &pccard_static_ops;
- sock->ops = &bcm63xx_pcmcia_operations;
- sock->owner = THIS_MODULE;
- sock->dev.parent = &pdev->dev;
- sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
- sock->io_offset = (unsigned long)skt->io_base;
- sock->pci_irq = irq;
-
-#ifdef CONFIG_CARDBUS
- sock->cb_dev = bcm63xx_cb_dev;
- if (bcm63xx_cb_dev)
- sock->features |= SS_CAP_CARDBUS;
-#endif
-
- /* assume common & attribute memory have the same size */
- sock->map_size = resource_size(skt->common_res);
-
- /* initialize polling timer */
- timer_setup(&skt->timer, bcm63xx_pcmcia_poll, 0);
-
- /* initialize pcmcia control register, drive VS[12] to 0,
- * leave CB IDSEL to the old value since it is set by the PCI
- * layer */
- val = pcmcia_readl(skt, PCMCIA_C1_REG);
- val &= PCMCIA_C1_CBIDSEL_MASK;
- val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
- pcmcia_writel(skt, val, PCMCIA_C1_REG);
-
- /*
- * Hardware has only one set of timings registers, not one for
- * each memory access type, so we configure them for the
- * slowest one: attribute memory.
- */
- val = PCMCIA_C2_DATA16_MASK;
- val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
- val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
- val |= 3 << PCMCIA_C2_SETUP_SHIFT;
- val |= 3 << PCMCIA_C2_HOLD_SHIFT;
- pcmcia_writel(skt, val, PCMCIA_C2_REG);
-
- ret = pcmcia_register_socket(sock);
- if (ret)
- goto err;
-
- /* start polling socket */
- mod_timer(&skt->timer,
- jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
-
- platform_set_drvdata(pdev, skt);
- return 0;
-
-err:
- if (skt->io_base)
- iounmap(skt->io_base);
- if (skt->base)
- iounmap(skt->base);
- if (skt->reg_res)
- release_mem_region(skt->reg_res->start, regmem_size);
- kfree(skt);
- return ret;
-}
-
-static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
-{
- struct bcm63xx_pcmcia_socket *skt;
- struct resource *res;
-
- skt = platform_get_drvdata(pdev);
- timer_shutdown_sync(&skt->timer);
- iounmap(skt->base);
- iounmap(skt->io_base);
- res = skt->reg_res;
- release_mem_region(res->start, resource_size(res));
- kfree(skt);
- return 0;
-}
-
-struct platform_driver bcm63xx_pcmcia_driver = {
- .probe = bcm63xx_drv_pcmcia_probe,
- .remove = bcm63xx_drv_pcmcia_remove,
- .driver = {
- .name = "bcm63xx_pcmcia",
- .owner = THIS_MODULE,
- },
-};
-
-#ifdef CONFIG_CARDBUS
-static int bcm63xx_cb_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- /* keep pci device */
- bcm63xx_cb_dev = dev;
- return platform_driver_register(&bcm63xx_pcmcia_driver);
-}
-
-static void bcm63xx_cb_exit(struct pci_dev *dev)
-{
- platform_driver_unregister(&bcm63xx_pcmcia_driver);
- bcm63xx_cb_dev = NULL;
-}
-
-static const struct pci_device_id bcm63xx_cb_table[] = {
- {
- .vendor = PCI_VENDOR_ID_BROADCOM,
- .device = BCM6348_CPU_ID,
- .subvendor = PCI_VENDOR_ID_BROADCOM,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
- .class_mask = ~0,
- },
-
- {
- .vendor = PCI_VENDOR_ID_BROADCOM,
- .device = BCM6358_CPU_ID,
- .subvendor = PCI_VENDOR_ID_BROADCOM,
- .subdevice = PCI_ANY_ID,
- .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
- .class_mask = ~0,
- },
-
- { },
-};
-
-MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
-
-static struct pci_driver bcm63xx_cardbus_driver = {
- .name = "bcm63xx_cardbus",
- .id_table = bcm63xx_cb_table,
- .probe = bcm63xx_cb_probe,
- .remove = bcm63xx_cb_exit,
-};
-#endif
-
-/*
- * if cardbus support is enabled, register our platform device after
- * our fake cardbus bridge has been registered
- */
-static int __init bcm63xx_pcmcia_init(void)
-{
-#ifdef CONFIG_CARDBUS
- return pci_register_driver(&bcm63xx_cardbus_driver);
-#else
- return platform_driver_register(&bcm63xx_pcmcia_driver);
-#endif
-}
-
-static void __exit bcm63xx_pcmcia_exit(void)
-{
-#ifdef CONFIG_CARDBUS
- return pci_unregister_driver(&bcm63xx_cardbus_driver);
-#else
- platform_driver_unregister(&bcm63xx_pcmcia_driver);
-#endif
-}
-
-module_init(bcm63xx_pcmcia_init);
-module_exit(bcm63xx_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Maxime Bizon <mbizon@...ebox.fr>");
-MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
deleted file mode 100644
index 2122c59a1c4a..000000000000
--- a/drivers/pcmcia/bcm63xx_pcmcia.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef BCM63XX_PCMCIA_H_
-#define BCM63XX_PCMCIA_H_
-
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <pcmcia/ss.h>
-#include <bcm63xx_dev_pcmcia.h>
-
-/* socket polling rate in ms */
-#define BCM63XX_PCMCIA_POLL_RATE 500
-
-enum {
- CARD_CARDBUS = (1 << 0),
- CARD_PCCARD = (1 << 1),
- CARD_5V = (1 << 2),
- CARD_3V = (1 << 3),
- CARD_XV = (1 << 4),
- CARD_YV = (1 << 5),
-};
-
-struct bcm63xx_pcmcia_socket {
- struct pcmcia_socket socket;
-
- /* platform specific data */
- struct bcm63xx_pcmcia_platform_data *pd;
-
- /* all regs access are protected by this spinlock */
- spinlock_t lock;
-
- /* pcmcia registers resource */
- struct resource *reg_res;
-
- /* base remapped address of registers */
- void __iomem *base;
-
- /* whether a card is detected at the moment */
- int card_detected;
-
- /* type of detected card (mask of above enum) */
- u8 card_type;
-
- /* keep last socket status to implement event reporting */
- unsigned int old_status;
-
- /* backup of requested socket state */
- socket_state_t requested_state;
-
- /* timer used for socket status polling */
- struct timer_list timer;
-
- /* attribute/common memory resources */
- struct resource *attr_res;
- struct resource *common_res;
- struct resource *io_res;
-
- /* base address of io memory */
- void __iomem *io_base;
-};
-
-#endif /* BCM63XX_PCMCIA_H_ */
--
2.39.2
Powered by blists - more mailing lists