| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <100c439a-2a4d-4cb2-96f2-5bf273e2121a@lunn.ch>
Date: Sun, 5 Mar 2023 19:35:32 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Klaus Kudielka <klaus.kudielka@...il.com>
Cc: Michael Walle <michael@...le.cc>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Felix Fietkau <nbd@....name>,
John Crispin <john@...ozen.org>,
Sean Wang <sean.wang@...iatek.com>,
Mark Lee <Mark-MC.Lee@...iatek.com>,
Lorenzo Bianconi <lorenzo@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Bryan Whitehead <bryan.whitehead@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
linux-aspeed@...ts.ozlabs.org,
Jesse Brandeburg <jesse.brandeburg@...el.com>
Subject: Re: [PATCH net-next v2 4/6] net: mdio: scan bus based on bus
capabilities for C22 and C45
On Sun, Mar 05, 2023 at 07:13:09PM +0100, Klaus Kudielka wrote:
> On Wed, 2023-01-18 at 11:01 +0100, Michael Walle wrote:
> > From: Andrew Lunn <andrew@...n.ch>
> >
> > Now that all MDIO bus drivers which set probe_capabilities to
> > MDIOBUS_C22_C45 have been converted to use the name API for C45
> > transactions, perform the scanning of the bus based on which methods
> > the bus provides.
> >
> > Signed-off-by: Andrew Lunn <andrew@...n.ch>
> > Signed-off-by: Michael Walle <michael@...le.cc>
> > Reviewed-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
>
> Hello,
>
> On a Turris Omnia (Armada 385, Marvell 88E6176) this commit results
> in a strange boot behaviour. I see two distinct multi-second freezes
> in dmesg. Usually (up to the commit before), the (monolithic) kernel
> starts init after ~1.6 seconds, now it takes more than 6....
>
> dmesg output below. Any idea, why this is happening?
The Armada 385 uses mdio-orian, also known as
drivers/net/ethernet/marvell/mvmdio.c. It comes in two variants, one
which supports only C22 and one which only supports C45, if i'm
reading orion_mdio_match[] correctly.
Please could you add a debug print in orion_mdio_smi_read() and
orion_mdio_xsmi_read_c45() and see if there is a difference before and
after this patch.
I'm assuming here the problem is with the MDIO bus associated to
mvneta, and not the mdio bus associated to the switch. That assumption
could be wrong, but the printk's should help with that as well.
Andrew
>
> Best regards, Klaus
>
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 6.2.0-rc3+ (xxxx) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Mar 5 16:20:57 CET 2023
> [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] OF: fdt: Machine model: Turris Omnia
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] Zone ranges:
> [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
> [ 0.000000] percpu: Embedded 12 pages/cpu s19604 r8192 d21356 u49152
> [ 0.000000] pcpu-alloc: s19604 r8192 d21356 u49152 alloc=12*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
> [ 0.000000] Kernel command line: console=ttyS0,115200 quiet root=PARTUUID=262ecdb3-01 mvneta.txq_number=2 mvneta.rxq_number=2
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 1022716K/1048576K available (7168K kernel code, 590K rwdata, 1776K rodata, 1024K init, 233K bss, 25860K reserved, 0K cma-reserved, 262144K highmem)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> [ 0.000000] Tracing variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
> [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
> [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
> [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
> [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
> [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
> [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
> [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.000001] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
> [ 0.000012] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
> [ 0.000026] Switching to timer-based delay loop, resolution 1ns
> [ 0.000153] Ignoring duplicate/late registration of read_current_timer delay
> [ 0.000159] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
> [ 0.000302] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=3200000)
> [ 0.000310] pid_max: default: 32768 minimum: 301
> [ 0.000396] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.000403] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
> [ 0.000726] CPU: Testing write buffer coherency: ok
> [ 0.000749] CPU0: Spectre v2: using BPIALL workaround
> [ 0.000864] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.001188] cblist_init_generic: Setting adjustable number of callback queues.
> [ 0.001192] cblist_init_generic: Setting shift to 1 and lim to 1.
> [ 0.001241] Setting up static identity map for 0x100000 - 0x100060
> [ 0.001314] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
> [ 0.001393] mvebu-pmsu: Initializing Power Management Service Unit
> [ 0.001458] rcu: Hierarchical SRCU implementation.
> [ 0.001460] rcu: Max phase no-delay instances is 1000.
> [ 0.001631] smp: Bringing up secondary CPUs ...
> [ 0.001833] Booting CPU 1
> [ 0.001955] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.001962] CPU1: Spectre v2: using BPIALL workaround
> [ 0.002016] smp: Brought up 1 node, 2 CPUs
> [ 0.002020] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
> [ 0.002025] CPU: All CPU(s) started in SVC mode.
> [ 0.002291] devtmpfs: initialized
> [ 0.004089] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
> [ 0.004132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.004141] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
> [ 0.004196] pinctrl core: initialized pinctrl subsystem
> [ 0.004478] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.004981] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.005337] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.005440] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
> [ 0.005445] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
> [ 0.010021] SCSI subsystem initialized
> [ 0.010039] libata version 3.00 loaded.
> [ 0.010094] usbcore: registered new interface driver usbfs
> [ 0.010107] usbcore: registered new interface driver hub
> [ 0.010123] usbcore: registered new device driver usb
> [ 0.010716] clocksource: Switched to clocksource arm_global_timer
> [ 0.011194] NET: Registered PF_INET protocol family
> [ 0.011303] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
> [ 0.012144] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
> [ 0.012157] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.012164] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
> [ 0.012201] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
> [ 0.012316] TCP: Hash tables configured (established 8192 bind 8192)
> [ 0.012363] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
> [ 0.012389] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
> [ 0.012498] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 0.013022] workingset: timestamp_bits=14 max_order=18 bucket_order=4
> [ 0.013133] Unpacking initramfs...
> [ 0.013356] NET: Registered PF_ALG protocol family
> [ 0.013390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
> [ 0.013406] io scheduler bfq registered
> [ 0.018260] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
> [ 0.018567] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
> [ 0.018922] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
> [ 0.019318] mv_xor f1060800.xor: Marvell shared XOR driver
> [ 0.047355] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
> [ 0.047527] mv_xor f1060900.xor: Marvell shared XOR driver
> [ 0.075302] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
> [ 0.075544] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
> [ 0.076072] printk: console [ttyS0] disabled
> [ 0.076106] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 38, base_baud = 15625000) is a 16550A
> [ 0.076131] printk: console [ttyS0] enabled
> [ 0.076545] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 39, base_baud = 15625000) is a 16550A
> [ 0.077023] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
> [ 0.077035] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
> [ 0.077454] scsi host0: ahci-mvebu
> [ 0.077669] scsi host1: ahci-mvebu
> [ 0.077746] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 40
> [ 0.077752] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 40
> [ 0.078389] spi-nor spi0.0: s25fl164k (8192 Kbytes)
> [ 0.186266] Freeing initrd memory: 4576K
> [ 0.194291] 3 fixed-partitions partitions found on MTD device spi0.0
> [ 0.194305] Creating 3 MTD partitions on "spi0.0":
> [ 0.194310] 0x000000000000-0x0000000f0000 : "U-Boot"
> [ 0.194494] 0x000000100000-0x000000800000 : "Rescue system"
> [ 0.194609] 0x0000000f0000-0x000000100000 : "u-boot-env"
> [ 0.202428] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
> [ 0.392679] ata2: SATA link down (SStatus 0 SControl 300)
> [ 0.554721] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 0.555400] ata1.00: supports DRM functions and may not be fully accessible
> [ 0.555404] ata1.00: ATA-10: KINGSTON SKC600MS512G, S4800105, max UDMA/133
> [ 0.555410] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32)
> [ 0.556078] ata1.00: Features: Trust Dev-Sleep
> [ 0.556178] ata1.00: supports DRM functions and may not be fully accessible
> [ 0.556830] ata1.00: configured for UDMA/133
> [ 0.557003] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC600M 0105 PQ: 0 ANSI: 5
> [ 0.557513] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
> [ 0.557521] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 0.557542] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.557548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.557582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.557650] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
> [ 0.558138] sda: sda1
> [ 0.558252] sd 0:0:0:0: [sda] Attached SCSI removable disk
> *** FREEZE ***
> [ 2.779254] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
> [ 2.780632] mvneta f1070000.ethernet eth0: Using device tree mac address d8:58:d7:00:6f:b9
> [ 2.781609] mvneta f1030000.ethernet eth1: Using device tree mac address d8:58:d7:00:6f:b7
> [ 2.782547] mvneta f1034000.ethernet eth2: Using device tree mac address d8:58:d7:00:6f:b8
> [ 2.782747] orion-ehci f1058000.usb: EHCI Host Controller
> [ 2.782761] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
> [ 2.782807] orion-ehci f1058000.usb: irq 45, io mem 0xf1058000
> [ 2.798726] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
> [ 2.799034] hub 1-0:1.0: USB hub found
> [ 2.799053] hub 1-0:1.0: 1 port detected
> [ 2.799415] xhci-hcd f10f0000.usb3: xHCI Host Controller
> [ 2.799427] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
> [ 2.799475] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
> [ 2.799497] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
> [ 2.799506] xhci-hcd f10f0000.usb3: xHCI Host Controller
> [ 2.799513] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
> [ 2.799525] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
> [ 2.799776] hub 2-0:1.0: USB hub found
> [ 2.799793] hub 2-0:1.0: 1 port detected
> [ 2.799927] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 2.800135] hub 3-0:1.0: USB hub found
> [ 2.800152] hub 3-0:1.0: 1 port detected
> [ 2.800329] xhci-hcd f10f8000.usb3: xHCI Host Controller
> [ 2.800340] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
> [ 2.800383] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
> [ 2.800404] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
> [ 2.800414] xhci-hcd f10f8000.usb3: xHCI Host Controller
> [ 2.800421] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
> [ 2.800431] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
> [ 2.800671] hub 4-0:1.0: USB hub found
> [ 2.800687] hub 4-0:1.0: 1 port detected
> [ 2.800824] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 2.801039] hub 5-0:1.0: USB hub found
> [ 2.801055] hub 5-0:1.0: 1 port detected
> [ 2.801293] usbcore: registered new interface driver uas
> [ 2.801337] usbcore: registered new interface driver usb-storage
> [ 2.801815] armada38x-rtc f10a3800.rtc: registered as rtc0
> [ 2.801892] armada38x-rtc f10a3800.rtc: setting system clock to 2023-03-05T16:48:56 UTC (1678034936)
> [ 2.803556] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
> [ 2.803591] i2c i2c-0: Added multiplexed i2c bus 1
> [ 2.803627] i2c i2c-0: Added multiplexed i2c bus 2
> [ 2.803657] i2c i2c-0: Added multiplexed i2c bus 3
> [ 2.803688] i2c i2c-0: Added multiplexed i2c bus 4
> [ 2.803717] i2c i2c-0: Added multiplexed i2c bus 5
> [ 2.803796] i2c i2c-0: Added multiplexed i2c bus 6
> [ 2.803828] i2c i2c-0: Added multiplexed i2c bus 7
> [ 2.804026] pca953x 8-0071: using no AI
> [ 2.805622] i2c i2c-0: Added multiplexed i2c bus 8
> [ 2.805630] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
> [ 2.807069] orion_wdt: Initial timeout 171 sec
> [ 2.807255] sdhci: Secure Digital Host Controller Interface driver
> [ 2.807259] sdhci: Copyright(c) Pierre Ossman
> [ 2.807320] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 2.816014] marvell-cesa f1090000.crypto: CESA device successfully registered
> [ 2.816451] NET: Registered PF_INET6 protocol family
> [ 2.817118] Segment Routing with IPv6
> [ 2.817146] In-situ OAM (IOAM) with IPv6
> [ 2.817208] NET: Registered PF_PACKET protocol family
> [ 2.817323] Registering SWP/SWPB emulation handler
> [ 2.838752] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
> [ 2.915557] sfp sfp: Host maximum power 3.0W
> [ 2.919406] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
> [ 2.942956] mmc0: new high speed MMC card at address 0001
> [ 2.943334] mmcblk0: mmc0:0001 H8G4a\x92 7.28 GiB
> [ 2.944348] mmcblk0: p1
> [ 2.944624] mmcblk0boot0: mmc0:0001 H8G4a\x92 4.00 MiB
> [ 2.944926] mmcblk0boot1: mmc0:0001 H8G4a\x92 4.00 MiB
> [ 2.945157] mmcblk0rpmb: mmc0:0001 H8G4a\x92 4.00 MiB, chardev (250:0)
> [ 3.246121] sfp sfp: module TP-LINK TL-SM321B rev sn 1403076900 dc 140401
> [ 3.246143] mvneta f1034000.ethernet eth2: switched to inband/1000base-x link mode
> *** FREEZE ***
> [ 5.956754] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
> [ 5.958419] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
> [ 5.959693] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
> [ 5.963191] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
> [ 6.030496] mv88e6085 f1072004.mdio-mii:10 lan0 (uninitialized): PHY [mv88e6xxx-1:00] driver [Marvell 88E1540] (irq=68)
> [ 6.102678] mv88e6085 f1072004.mdio-mii:10 lan1 (uninitialized): PHY [mv88e6xxx-1:01] driver [Marvell 88E1540] (irq=69)
> [ 6.174861] mv88e6085 f1072004.mdio-mii:10 lan2 (uninitialized): PHY [mv88e6xxx-1:02] driver [Marvell 88E1540] (irq=70)
> [ 6.246141] mv88e6085 f1072004.mdio-mii:10 lan3 (uninitialized): PHY [mv88e6xxx-1:03] driver [Marvell 88E1540] (irq=71)
> [ 6.318682] mv88e6085 f1072004.mdio-mii:10 lan4 (uninitialized): PHY [mv88e6xxx-1:04] driver [Marvell 88E1540] (irq=72)
> [ 6.321598] device eth1 entered promiscuous mode
> [ 6.322472] device eth0 entered promiscuous mode
> [ 6.322491] DSA: tree 0 setup
> [ 6.323315] Freeing unused kernel image (initmem) memory: 1024K
> [ 6.323453] Run /init as init process
> [ 6.323457] with arguments:
> [ 6.323459] /init
> [ 6.323461] with environment:
> [ 6.323463] HOME=/
> [ 6.323465] TERM=linux
>
Powered by blists - more mailing lists