[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZArm11JCCD5ymspR@tom-HP-ZBook-Fury-15-G7-Mobile-Workstation>
Date: Fri, 10 Mar 2023 09:14:15 +0100
From: Tommaso Merciai <tomm.merciai@...il.com>
To: Frank Sae <Frank.Sae@...or-comm.com>
Cc: Peter Geis <pgwipeout@...il.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
yanhong.wang@...rfivetech.com, xiaogang.fan@...or-comm.com,
fei.zhang@...or-comm.com, hua.sun@...or-comm.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH net-next v5 0/5] add dts for yt8521 and yt8531s, add
driver for yt8531
Hello Frank,
On Thu, Feb 02, 2023 at 11:00:32AM +0800, Frank Sae wrote:
> Add dts for yt8521 and yt8531s, add driver for yt8531.
> These patches have been verified on our AM335x platform (motherboard)
> which has one integrated yt8521 and one RGMII interface.
> It can connect to daughter boards like yt8531s or yt8531 board.
Thanks for this series.
I test on my jh7110-starfive-visionfive-2-v1.3b
Great job!
Tested-by: Tommaso Merciai <tomm.merciai@...il.com>
Regards,
Tommaso
>
> v5:
> - change the compatible of yaml
> - change the maintainers of yaml from "frank sae" to "Frank Sae"
>
> v4:
> - change default tx delay from 150ps to 1950ps
> - add compatible for yaml
>
> v3:
> - change default rx delay from 1900ps to 1950ps
> - moved ytphy_rgmii_clk_delay_config_with_lock from yt8521's patch to yt8531's patch
> - removed unnecessary checks of phydev->attached_dev->dev_addr
>
> v2:
> - split BIT macro as one patch
> - split "dts for yt8521/yt8531s ... " patch as two patches
> - use standard rx-internal-delay-ps and tx-internal-delay-ps, removed motorcomm,sds-tx-amplitude
> - removed ytphy_parse_dt, ytphy_probe_helper and ytphy_config_init_helper
> - not store dts arg to yt8521_priv
>
> Frank Sae (5):
> dt-bindings: net: Add Motorcomm yt8xxx ethernet phy
> net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet
> phy
> net: phy: Add dts support for Motorcomm yt8521 gigabit ethernet phy
> net: phy: Add dts support for Motorcomm yt8531s gigabit ethernet phy
> net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy
>
> .../bindings/net/motorcomm,yt8xxx.yaml | 117 ++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> MAINTAINERS | 1 +
> drivers/net/phy/Kconfig | 2 +-
> drivers/net/phy/motorcomm.c | 553 +++++++++++++++---
> 5 files changed, 597 insertions(+), 78 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
>
> --
> 2.34.1
>
Powered by blists - more mailing lists