[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230313145349.3557231-5-idosch@nvidia.com>
Date: Mon, 13 Mar 2023 16:53:42 +0200
From: Ido Schimmel <idosch@...dia.com>
To: netdev@...r.kernel.org, bridge@...ts.linux-foundation.org
Cc: davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
edumazet@...gle.com, roopa@...dia.com, razor@...ckwall.org,
petrm@...dia.com, mlxsw@...dia.com,
Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 04/11] rtnetlink: bridge: mcast: Relax group address validation in common code
In the upcoming VXLAN MDB implementation, the 0.0.0.0 and :: MDB entries
will act as catchall entries for unregistered IP multicast traffic in a
similar fashion to the 00:00:00:00:00:00 VXLAN FDB entry that is used to
transmit BUM traffic.
In deployments where inter-subnet multicast forwarding is used, not all
the VTEPs in a tenant domain are members in all the broadcast domains.
It is therefore advantageous to transmit BULL (broadcast, unknown
unicast and link-local multicast) and unregistered IP multicast traffic
on different tunnels. If the same tunnel was used, a VTEP only
interested in IP multicast traffic would also pull all the BULL traffic
and drop it as it is not a member in the originating broadcast domain
[1].
Prepare for this change by allowing the 0.0.0.0 group address in the
common rtnetlink MDB code and forbid it in the bridge driver. A similar
change is not needed for IPv6 because the common code only validates
that the group address is not the all-nodes address.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-2.6
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
net/bridge/br_mdb.c | 6 ++++++
net/core/rtnetlink.c | 5 +++--
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
index 76636c61db21..7305f5f8215c 100644
--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -1246,6 +1246,12 @@ static int br_mdb_config_init(struct br_mdb_config *cfg, struct net_device *dev,
}
}
+ if (cfg->entry->addr.proto == htons(ETH_P_IP) &&
+ ipv4_is_zeronet(cfg->entry->addr.u.ip4)) {
+ NL_SET_ERR_MSG_MOD(extack, "IPv4 entry group address 0.0.0.0 is not allowed");
+ return -EINVAL;
+ }
+
if (tb[MDBA_SET_ENTRY_ATTRS])
return br_mdb_config_attrs_init(tb[MDBA_SET_ENTRY_ATTRS], cfg,
extack);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index f347d9fa78c7..b7b1661d0d56 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -6152,8 +6152,9 @@ static int rtnl_validate_mdb_entry(const struct nlattr *attr,
}
if (entry->addr.proto == htons(ETH_P_IP)) {
- if (!ipv4_is_multicast(entry->addr.u.ip4)) {
- NL_SET_ERR_MSG(extack, "IPv4 entry group address is not multicast");
+ if (!ipv4_is_multicast(entry->addr.u.ip4) &&
+ !ipv4_is_zeronet(entry->addr.u.ip4)) {
+ NL_SET_ERR_MSG(extack, "IPv4 entry group address is not multicast or 0.0.0.0");
return -EINVAL;
}
if (ipv4_is_local_multicast(entry->addr.u.ip4)) {
--
2.37.3
Powered by blists - more mailing lists