netdev - Re: [PATCH net 1/2] net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <a2f99c07-f9d0-7e35-61bb-cf3bf76ca919@gmail.com>
Date:   Wed, 15 Mar 2023 11:34:18 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Vladimir Oltean <vladimir.oltean@....com>, netdev@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Murali Krishna Policharla <murali.policharla@...adcom.com>,
        Lukasz Majewski <lukma@...x.de>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net 1/2] net: dsa: don't error out when drivers return
 ETH_DATA_LEN in .port_max_mtu()

On 3/14/23 11:24, Vladimir Oltean wrote:
> Currently, when dsa_slave_change_mtu() is called on a user port where
> dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code
> will stumble upon this check:
> 
> 	if (new_master_mtu > mtu_limit)
> 		return -ERANGE;
> 
> because new_master_mtu is adjusted for the tagger overhead but mtu_limit
> is not.
> 
> But it would be good if the logic went through, for example if the DSA
> master really depends on an MTU adjustment to accept DSA-tagged frames.
> 
> To make the code pass through the check, we need to adjust mtu_limit for
> the overhead as well, if the minimum restriction was caused by the DSA
> user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU
> are always offset by the protocol overhead.
> 
> Currently no drivers return 1500 .port_max_mtu(), but this is only
> temporary and a bug in itself - mv88e6xxx should have done that, but
> since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when
> setting MTU for DSA and CPU ports") it no longer does. This is a
> preparation for fixing that.
> 
> Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
-- 
Florian