| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230317200904.3796436-1-anthony.l.nguyen@intel.com>
Date: Fri, 17 Mar 2023 13:09:03 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
edumazet@...gle.com
Cc: Tony Nguyen <anthony.l.nguyen@...el.com>,
jesse.brandeburg@...el.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, intel-wired-lan@...ts.osuosl.org
Subject: [PATCH net-next] ixgb: Remove ixgb driver
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Suggested-by: Jakub Kicinski <kuba@...nel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
---
Documentation/PCI/pci-error-recovery.rst | 1 -
.../device_drivers/ethernet/index.rst | 1 -
.../device_drivers/ethernet/intel/ixgb.rst | 468 ----
arch/loongarch/configs/loongson3_defconfig | 1 -
arch/mips/configs/loongson2k_defconfig | 1 -
arch/mips/configs/loongson3_defconfig | 1 -
arch/mips/configs/mtx1_defconfig | 1 -
arch/powerpc/configs/powernv_defconfig | 1 -
arch/powerpc/configs/ppc64_defconfig | 1 -
arch/powerpc/configs/ppc64e_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/powerpc/configs/pseries_defconfig | 1 -
arch/powerpc/configs/skiroot_defconfig | 1 -
drivers/net/ethernet/intel/Kconfig | 17 -
drivers/net/ethernet/intel/Makefile | 1 -
drivers/net/ethernet/intel/ixgb/Makefile | 9 -
drivers/net/ethernet/intel/ixgb/ixgb.h | 179 --
drivers/net/ethernet/intel/ixgb/ixgb_ee.c | 580 -----
drivers/net/ethernet/intel/ixgb/ixgb_ee.h | 79 -
.../net/ethernet/intel/ixgb/ixgb_ethtool.c | 642 -----
drivers/net/ethernet/intel/ixgb/ixgb_hw.c | 1229 ---------
drivers/net/ethernet/intel/ixgb/ixgb_hw.h | 767 ------
drivers/net/ethernet/intel/ixgb/ixgb_ids.h | 23 -
drivers/net/ethernet/intel/ixgb/ixgb_main.c | 2285 -----------------
drivers/net/ethernet/intel/ixgb/ixgb_osdep.h | 39 -
drivers/net/ethernet/intel/ixgb/ixgb_param.c | 442 ----
26 files changed, 6772 deletions(-)
delete mode 100644 Documentation/networking/device_drivers/ethernet/intel/ixgb.rst
delete mode 100644 drivers/net/ethernet/intel/ixgb/Makefile
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb.h
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_ee.c
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_ee.h
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_hw.c
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_hw.h
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_ids.h
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_main.c
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
delete mode 100644 drivers/net/ethernet/intel/ixgb/ixgb_param.c
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index bdafeb4b66dc..9981d330da8f 100644
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -418,7 +418,6 @@ That is, the recovery API only requires that:
- drivers/next/e100.c
- drivers/net/e1000
- drivers/net/e1000e
- - drivers/net/ixgb
- drivers/net/ixgbe
- drivers/net/cxgb3
- drivers/net/s2io.c
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 392969ac88ad..6e9e7012d000 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -31,7 +31,6 @@ Contents:
intel/fm10k
intel/igb
intel/igbvf
- intel/ixgb
intel/ixgbe
intel/ixgbevf
intel/i40e
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst b/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst
deleted file mode 100644
index c6a233e68ad6..000000000000
--- a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst
+++ /dev/null
@@ -1,468 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-=====================================================================
-Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection
-=====================================================================
-
-October 1, 2018
-
-
-Contents
-========
-
-- In This Release
-- Identifying Your Adapter
-- Command Line Parameters
-- Improving Performance
-- Additional Configurations
-- Known Issues/Troubleshooting
-- Support
-
-
-
-In This Release
-===============
-
-This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R)
-Network Connection. This driver includes support for Itanium(R)2-based
-systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your 10 Gigabit adapter. All hardware requirements listed apply
-to use with Linux.
-
-The following features are available in this kernel:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.rst
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release. Alternatively, you can use ethtool (version 1.6
-or later), lspci, and iproute2 to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-
-Identifying Your Adapter
-========================
-
-The following Intel network adapters are compatible with the drivers in this
-release:
-
-+------------+------------------------------+----------------------------------+
-| Controller | Adapter Name | Physical Layer |
-+============+==============================+==================================+
-| 82597EX | Intel(R) PRO/10GbE LR/SR/CX4 | - 10G Base-LR (fiber) |
-| | Server Adapters | - 10G Base-SR (fiber) |
-| | | - 10G Base-CX4 (copper) |
-+------------+------------------------------+----------------------------------+
-
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
- https://support.intel.com
-
-
-Command Line Parameters
-=======================
-
-If the driver is built as a module, the following optional parameters are
-used by entering them on the command line with the modprobe command using
-this syntax::
-
- modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two 10GbE PCI adapters, entering::
-
- modprobe ixgb TxDescriptors=80,128
-
-loads the ixgb driver with 80 TX resources for the first adapter and 128 TX
-resources for the second adapter.
-
-The default value for each parameter is generally the recommended setting,
-unless otherwise noted.
-
-Copybreak
----------
-:Valid Range: 0-XXXX
-:Default Value: 256
-
- This is the maximum size of packet that is copied to a new buffer on
- receive.
-
-Debug
------
-:Valid Range: 0-16 (0=none,...,16=all)
-:Default Value: 0
-
- This parameter adjusts the level of debug messages displayed in the
- system logs.
-
-FlowControl
------------
-:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
-:Default Value: 1 if no EEPROM, otherwise read from EEPROM
-
- This parameter controls the automatic generation(Tx) and response(Rx) to
- Ethernet PAUSE frames. There are hardware bugs associated with enabling
- Tx flow control so beware.
-
-RxDescriptors
--------------
-:Valid Range: 64-4096
-:Default Value: 1024
-
- This value is the number of receive descriptors allocated by the driver.
- Increasing this value allows the driver to buffer more incoming packets.
- Each descriptor is 16 bytes. A receive buffer is also allocated for
- each descriptor and can be either 2048, 4056, 8192, or 16384 bytes,
- depending on the MTU setting. When the MTU size is 1500 or less, the
- receive buffer size is 2048 bytes. When the MTU is greater than 1500 the
- receive buffer size will be either 4056, 8192, or 16384 bytes. The
- maximum MTU size is 16114.
-
-TxDescriptors
--------------
-:Valid Range: 64-4096
-:Default Value: 256
-
- This value is the number of transmit descriptors allocated by the driver.
- Increasing this value allows the driver to queue more transmits. Each
- descriptor is 16 bytes.
-
-RxIntDelay
-----------
-:Valid Range: 0-65535 (0=off)
-:Default Value: 72
-
- This value delays the generation of receive interrupts in units of
- 0.8192 microseconds. Receive interrupt reduction can improve CPU
- efficiency if properly tuned for specific network traffic. Increasing
- this value adds extra latency to frame reception and can end up
- decreasing the throughput of TCP traffic. If the system is reporting
- dropped receives, this value may be set too high, causing the driver to
- run out of available receive descriptors.
-
-TxIntDelay
-----------
-:Valid Range: 0-65535 (0=off)
-:Default Value: 32
-
- This value delays the generation of transmit interrupts in units of
- 0.8192 microseconds. Transmit interrupt reduction can improve CPU
- efficiency if properly tuned for specific network traffic. Increasing
- this value adds extra latency to frame transmission and can end up
- decreasing the throughput of TCP traffic. If this value is set too high,
- it will cause the driver to run out of available transmit descriptors.
-
-XsumRX
-------
-:Valid Range: 0-1
-:Default Value: 1
-
- A value of '1' indicates that the driver should enable IP checksum
- offload for received packets (both UDP and TCP) to the adapter hardware.
-
-RxFCHighThresh
---------------
-:Valid Range: 1,536-262,136 (0x600 - 0x3FFF8, 8 byte granularity)
-:Default Value: 196,608 (0x30000)
-
- Receive Flow control high threshold (when we send a pause frame)
-
-RxFCLowThresh
--------------
-:Valid Range: 64-262,136 (0x40 - 0x3FFF8, 8 byte granularity)
-:Default Value: 163,840 (0x28000)
-
- Receive Flow control low threshold (when we send a resume frame)
-
-FCReqTimeout
-------------
-:Valid Range: 1-65535
-:Default Value: 65535
-
- Flow control request timeout (how long to pause the link partner's tx)
-
-IntDelayEnable
---------------
-:Value Range: 0,1
-:Default Value: 1
-
- Interrupt Delay, 0 disables transmit interrupt delay and 1 enables it.
-
-
-Improving Performance
-=====================
-
-With the 10 Gigabit server adapters, the default Linux configuration will
-very likely limit the total available throughput artificially. There is a set
-of configuration changes that, when applied together, will increase the ability
-of Linux to transmit and receive data. The following enhancements were
-originally acquired from settings published at https://www.spec.org/web99/ for
-various submitted results using Linux.
-
-NOTE:
- These changes are only suggestions, and serve as a starting point for
- tuning your network performance.
-
-The changes are made in three major ways, listed in order of greatest effect:
-
-- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen
- parameter.
-- Use sysctl to modify /proc parameters (essentially kernel tuning)
-- Use setpci to modify the MMRBC field in PCI-X configuration space to increase
- transmit burst lengths on the bus.
-
-NOTE:
- setpci modifies the adapter's configuration registers to allow it to read
- up to 4k bytes at a time (for transmits). However, for some systems the
- behavior after modifying this register may be undefined (possibly errors of
- some kind). A power-cycle, hard reset or explicitly setting the e6 register
- back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
- stable configuration.
-
-- COPY these lines and paste them into ixgb_perf.sh:
-
-::
-
- #!/bin/bash
- echo "configuring network performance , edit this file to change the interface
- or device ID of 10GbE card"
- # set mmrbc to 4k reads, modify only Intel 10GbE device IDs
- # replace 1a48 with appropriate 10GbE device's ID installed on the system,
- # if needed.
- setpci -d 8086:1a48 e6.b=2e
- # set the MTU (max transmission unit) - it requires your switch and clients
- # to change as well.
- # set the txqueuelen
- # your ixgb adapter should be loaded as eth1 for this to work, change if needed
- ip li set dev eth1 mtu 9000 txqueuelen 1000 up
- # call the sysctl utility to modify /proc/sys entries
- sysctl -p ./sysctl_ixgb.conf
-
-- COPY these lines and paste them into sysctl_ixgb.conf:
-
-::
-
- # some of the defaults may be different for your kernel
- # call this file with sysctl -p <this file>
- # these are just suggested values that worked well to increase throughput in
- # several network benchmark tests, your mileage may vary
-
- ### IPV4 specific settings
- # turn TCP timestamp support off, default 1, reduces CPU use
- net.ipv4.tcp_timestamps = 0
- # turn SACK support off, default on
- # on systems with a VERY fast bus -> memory interface this is the big gainer
- net.ipv4.tcp_sack = 0
- # set min/default/max TCP read buffer, default 4096 87380 174760
- net.ipv4.tcp_rmem = 10000000 10000000 10000000
- # set min/pressure/max TCP write buffer, default 4096 16384 131072
- net.ipv4.tcp_wmem = 10000000 10000000 10000000
- # set min/pressure/max TCP buffer space, default 31744 32256 32768
- net.ipv4.tcp_mem = 10000000 10000000 10000000
-
- ### CORE settings (mostly for socket and UDP effect)
- # set maximum receive socket buffer size, default 131071
- net.core.rmem_max = 524287
- # set maximum send socket buffer size, default 131071
- net.core.wmem_max = 524287
- # set default receive socket buffer size, default 65535
- net.core.rmem_default = 524287
- # set default send socket buffer size, default 65535
- net.core.wmem_default = 524287
- # set maximum amount of option memory buffers, default 10240
- net.core.optmem_max = 524287
- # set number of unprocessed input packets before kernel starts dropping them; default 300
- net.core.netdev_max_backlog = 300000
-
-Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface
-your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's
-ID installed on the system.
-
-NOTE:
- Unless these scripts are added to the boot process, these changes will
- only last only until the next system reboot.
-
-
-Resolving Slow UDP Traffic
---------------------------
-If your server does not seem to be able to receive UDP traffic as fast as it
-can receive TCP traffic, it could be because Linux, by default, does not set
-the network stack buffers as large as they need to be to support high UDP
-transfer rates. One way to alleviate this problem is to allow more memory to
-be used by the IP stack to store incoming data.
-
-For instance, use the commands::
-
- sysctl -w net.core.rmem_max=262143
-
-and::
-
- sysctl -w net.core.rmem_default=262143
-
-to increase the read buffer memory max and default to 262143 (256k - 1) from
-defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables
-will increase the amount of memory used by the network stack for receives, and
-can be increased significantly more if necessary for your application.
-
-
-Additional Configurations
-=========================
-
-Configuring the Driver on Different Distributions
--------------------------------------------------
-Configuring a network driver to load properly when the system is started is
-distribution dependent. Typically, the configuration process involves adding
-an alias line to /etc/modprobe.conf as well as editing other system startup
-scripts and/or configuration files. Many popular Linux distributions ship
-with tools to make these changes for you. To learn the proper way to
-configure a network device for your system, refer to your distribution
-documentation. If during this process you are asked for the driver or module
-name, the name for the Linux Base Driver for the Intel 10GbE Family of
-Adapters is ixgb.
-
-Viewing Link Messages
----------------------
-Link messages will not be displayed to the console if the distribution is
-restricting system messages. In order to see network driver link messages on
-your console, set dmesg to eight by entering the following::
-
- dmesg -n 8
-
-NOTE: This setting is not saved across reboots.
-
-Jumbo Frames
-------------
-The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
-enabled by changing the MTU to a value larger than the default of 1500.
-The maximum value for the MTU is 16114. Use the ip command to
-increase the MTU size. For example::
-
- ip li set dev ethx mtu 9000
-
-The maximum MTU setting for Jumbo Frames is 16114. This value coincides
-with the maximum Jumbo Frames size of 16128.
-
-Ethtool
--------
-The driver utilizes the ethtool interface for driver configuration and
-diagnostics, as well as displaying statistical information. The ethtool
-version 1.6 or later is required for this functionality.
-
-The latest release of ethtool can be found from
-https://www.kernel.org/pub/software/network/ethtool/
-
-NOTE:
- The ethtool version 1.6 only supports a limited set of ethtool options.
- Support for a more complete ethtool feature set can be enabled by
- upgrading to the latest version.
-
-NAPI
-----
-NAPI (Rx polling mode) is supported in the ixgb driver.
-
-See https://wiki.linuxfoundation.org/networking/napi for more information on
-NAPI.
-
-
-Known Issues/Troubleshooting
-============================
-
-NOTE:
- After installing the driver, if your Intel Network Connection is not
- working, verify in the "In This Release" section of the readme that you have
- installed the correct driver.
-
-Cable Interoperability Issue with Fujitsu XENPAK Module in SmartBits Chassis
-----------------------------------------------------------------------------
-Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
-Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
-chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
-The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
-Server adapter or the SmartBits. If this situation occurs using a different
-cable assembly may resolve the issue.
-
-Cable Interoperability Issues with HP Procurve 3400cl Switch Port
------------------------------------------------------------------
-Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
-adapter is connected to an HP Procurve 3400cl switch port using short cables
-(1 m or shorter). If this situation occurs, using a longer cable may resolve
-the issue.
-
-Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
-Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
-errors may be received either by the CX4 Server adapter or at the switch. If
-this situation occurs, using a different cable assembly may resolve the issue.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames. If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments. If this is observed, increasing the application's socket buffer
-size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
-See the specific application manual and /usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Allocating Rx Buffers when Using Jumbo Frames
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
-the available memory is heavily fragmented. This issue may be seen with PCI-X
-adapters or with packet split disabled. This can be reduced or eliminated
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes.
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected. All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, do either of the following:
-
- - Turn on ARP filtering by entering::
-
- echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-
- - Install the interfaces in separate broadcast domains - either in
- different switches or in a switch partitioned to VLANs.
-
-UDP Stress Test Dropped Packet Issue
---------------------------------------
-Under small packets UDP stress test with 10GbE driver, the Linux system
-may drop UDP packets due to the fullness of socket buffers. You may want
-to change the driver's Flow Control variables to the minimum value for
-controlling packet reception.
-
-Tx Hangs Possible Under Stress
-------------------------------
-Under stress conditions, if TX hangs occur, turning off TSO
-"ethtool -K eth0 tso off" may resolve the problem.
-
-
-Support
-=======
-For general information, go to the Intel support website at:
-
-https://www.intel.com/support/
-
-or the Intel Wired Networking project hosted by Sourceforge at:
-
-https://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on a supported kernel
-with a supported adapter, email the specific information related to the issue
-to e1000-devel@...ts.sf.net
diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig
index e18213f01cc4..6cd26dd3c134 100644
--- a/arch/loongarch/configs/loongson3_defconfig
+++ b/arch/loongarch/configs/loongson3_defconfig
@@ -487,7 +487,6 @@ CONFIG_CHELSIO_T4=m
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
-CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig
index 728bef666f7a..0ab029ecad21 100644
--- a/arch/mips/configs/loongson2k_defconfig
+++ b/arch/mips/configs/loongson2k_defconfig
@@ -154,7 +154,6 @@ CONFIG_TUN=m
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
-CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index aca66a5f330d..6f4a52608ea4 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -207,7 +207,6 @@ CONFIG_VIRTIO_NET=m
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
-CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index edf9634aa8ee..e1b66aac7025 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -280,7 +280,6 @@ CONFIG_SUNDANCE=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_E100=m
CONFIG_E1000=m
-CONFIG_IXGB=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_MYRI10GE=m
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index c92652575064..f2a9be02a8d2 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -170,7 +170,6 @@ CONFIG_S2IO=m
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
-CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_I40E=m
CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index d6949a6c5b2b..6c46e5560d96 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -182,7 +182,6 @@ CONFIG_IBMVNIC=m
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
-CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_I40E=m
CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index f97a2d31bbf7..776c32964e12 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -102,7 +102,6 @@ CONFIG_PCNET32=y
CONFIG_TIGON3=y
CONFIG_E100=y
CONFIG_E1000=y
-CONFIG_IXGB=m
CONFIG_SUNGEM=y
CONFIG_BROADCOM_PHY=m
CONFIG_MARVELL_PHY=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index f73c98be56c8..5927b2312936 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -455,7 +455,6 @@ CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
-CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_MV643XX_ETH=m
CONFIG_SKGE=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 7497e17ea657..49b3ff4e3b18 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -164,7 +164,6 @@ CONFIG_IBMVNIC=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
-CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_I40E=m
CONFIG_MLX4_EN=m
diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
index e0964210f259..71cfb990a74f 100644
--- a/arch/powerpc/configs/skiroot_defconfig
+++ b/arch/powerpc/configs/skiroot_defconfig
@@ -149,7 +149,6 @@ CONFIG_BE2NET=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
-CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_I40E=m
# CONFIG_NET_VENDOR_MARVELL is not set
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index c18c3b373846..9bc0a9519899 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -139,23 +139,6 @@ config IGBVF
To compile this driver as a module, choose M here. The module
will be called igbvf.
-config IXGB
- tristate "Intel(R) PRO/10GbE support"
- depends on PCI
- help
- This driver supports Intel(R) PRO/10GbE family of adapters for
- PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
- instead. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide that can be located at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/device_drivers/ethernet/intel/ixgb.rst>.
-
- To compile this driver as a module, choose M here. The module
- will be called ixgb.
-
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI
diff --git a/drivers/net/ethernet/intel/Makefile b/drivers/net/ethernet/intel/Makefile
index 3075290063f6..d80d04132073 100644
--- a/drivers/net/ethernet/intel/Makefile
+++ b/drivers/net/ethernet/intel/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_IGBVF) += igbvf/
obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGBEVF) += ixgbevf/
obj-$(CONFIG_I40E) += i40e/
-obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IAVF) += iavf/
obj-$(CONFIG_FM10K) += fm10k/
obj-$(CONFIG_ICE) += ice/
diff --git a/drivers/net/ethernet/intel/ixgb/Makefile b/drivers/net/ethernet/intel/ixgb/Makefile
deleted file mode 100644
index 2433e9300a33..000000000000
--- a/drivers/net/ethernet/intel/ixgb/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Copyright(c) 1999 - 2008 Intel Corporation.
-#
-# Makefile for the Intel(R) PRO/10GbE ethernet driver
-#
-
-obj-$(CONFIG_IXGB) += ixgb.o
-
-ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb.h b/drivers/net/ethernet/intel/ixgb/ixgb.h
deleted file mode 100644
index 81ac39576803..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#ifndef _IXGB_H_
-#define _IXGB_H_
-
-#include <linux/stddef.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pagemap.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/capability.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/udp.h>
-#include <net/pkt_sched.h>
-#include <linux/list.h>
-#include <linux/reboot.h>
-#include <net/checksum.h>
-
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-
-#define BAR_0 0
-#define BAR_1 1
-
-struct ixgb_adapter;
-#include "ixgb_hw.h"
-#include "ixgb_ee.h"
-#include "ixgb_ids.h"
-
-/* TX/RX descriptor defines */
-#define DEFAULT_TXD 256
-#define MAX_TXD 4096
-#define MIN_TXD 64
-
-/* hardware cannot reliably support more than 512 descriptors owned by
- * hardware descriptor cache otherwise an unreliable ring under heavy
- * receive load may result */
-#define DEFAULT_RXD 512
-#define MAX_RXD 512
-#define MIN_RXD 64
-
-/* Supported Rx Buffer Sizes */
-#define IXGB_RXBUFFER_2048 2048
-#define IXGB_RXBUFFER_4096 4096
-#define IXGB_RXBUFFER_8192 8192
-#define IXGB_RXBUFFER_16384 16384
-
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct ixgb_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- u16 mapped_as_page;
-};
-
-struct ixgb_desc_ring {
- /* pointer to the descriptor ring memory */
- void *desc;
- /* physical address of the descriptor ring */
- dma_addr_t dma;
- /* length of descriptor ring in bytes */
- unsigned int size;
- /* number of descriptors in the ring */
- unsigned int count;
- /* next descriptor to associate a buffer with */
- unsigned int next_to_use;
- /* next descriptor to check for DD status bit */
- unsigned int next_to_clean;
- /* array of buffer information structs */
- struct ixgb_buffer *buffer_info;
-};
-
-#define IXGB_DESC_UNUSED(R) \
- ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
- (R)->next_to_clean - (R)->next_to_use - 1)
-
-#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
-#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc)
-#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc)
-#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc)
-
-/* board specific private data structure */
-
-struct ixgb_adapter {
- struct timer_list watchdog_timer;
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u32 bd_number;
- u32 rx_buffer_len;
- u32 part_num;
- u16 link_speed;
- u16 link_duplex;
- struct work_struct tx_timeout_task;
-
- /* TX */
- struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
- unsigned int restart_queue;
- unsigned long timeo_start;
- u32 tx_cmd_type;
- u64 hw_csum_tx_good;
- u64 hw_csum_tx_error;
- u32 tx_int_delay;
- u32 tx_timeout_count;
- bool tx_int_delay_enable;
- bool detect_tx_hung;
-
- /* RX */
- struct ixgb_desc_ring rx_ring;
- u64 hw_csum_rx_error;
- u64 hw_csum_rx_good;
- u32 rx_int_delay;
- bool rx_csum;
-
- /* OS defined structs */
- struct napi_struct napi;
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- /* structs defined in ixgb_hw.h */
- struct ixgb_hw hw;
- u16 msg_enable;
- struct ixgb_hw_stats stats;
- u32 alloc_rx_buff_failed;
- bool have_msi;
- unsigned long flags;
-};
-
-enum ixgb_state_t {
- /* TBD
- __IXGB_TESTING,
- __IXGB_RESETTING,
- */
- __IXGB_DOWN
-};
-
-/* Exported from other modules */
-void ixgb_check_options(struct ixgb_adapter *adapter);
-void ixgb_set_ethtool_ops(struct net_device *netdev);
-extern char ixgb_driver_name[];
-
-void ixgb_set_speed_duplex(struct net_device *netdev);
-
-int ixgb_up(struct ixgb_adapter *adapter);
-void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
-void ixgb_reset(struct ixgb_adapter *adapter);
-int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
-int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
-void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
-void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
-void ixgb_update_stats(struct ixgb_adapter *adapter);
-
-
-#endif /* _IXGB_H_ */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
deleted file mode 100644
index 129286fc1634..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
+++ /dev/null
@@ -1,580 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "ixgb_hw.h"
-#include "ixgb_ee.h"
-/* Local prototypes */
-static u16 ixgb_shift_in_bits(struct ixgb_hw *hw);
-
-static void ixgb_shift_out_bits(struct ixgb_hw *hw,
- u16 data,
- u16 count);
-static void ixgb_standby_eeprom(struct ixgb_hw *hw);
-
-static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw);
-
-static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
-
-/******************************************************************************
- * Raises the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd_reg - EECD's current value
- *****************************************************************************/
-static void
-ixgb_raise_clock(struct ixgb_hw *hw,
- u32 *eecd_reg)
-{
- /* Raise the clock input to the EEPROM (by setting the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd_reg = *eecd_reg | IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, *eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Lowers the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd_reg - EECD's current value
- *****************************************************************************/
-static void
-ixgb_lower_clock(struct ixgb_hw *hw,
- u32 *eecd_reg)
-{
- /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, *eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Shift data bits out to the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * data - data to send to the EEPROM
- * count - number of bits to shift out
- *****************************************************************************/
-static void
-ixgb_shift_out_bits(struct ixgb_hw *hw,
- u16 data,
- u16 count)
-{
- u32 eecd_reg;
- u32 mask;
-
- /* We need to shift "count" bits out to the EEPROM. So, value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01 << (count - 1);
- eecd_reg = IXGB_READ_REG(hw, EECD);
- eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
- do {
- /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
- * and then raising and then lowering the clock (the SK bit controls
- * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
- * by setting "DI" to "0" and then raising and then lowering the clock.
- */
- eecd_reg &= ~IXGB_EECD_DI;
-
- if (data & mask)
- eecd_reg |= IXGB_EECD_DI;
-
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
-
- udelay(50);
-
- ixgb_raise_clock(hw, &eecd_reg);
- ixgb_lower_clock(hw, &eecd_reg);
-
- mask = mask >> 1;
-
- } while (mask);
-
- /* We leave the "DI" bit set to "0" when we leave this routine. */
- eecd_reg &= ~IXGB_EECD_DI;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-}
-
-/******************************************************************************
- * Shift data bits in from the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static u16
-ixgb_shift_in_bits(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
- u32 i;
- u16 data;
-
- /* In order to read a register from the EEPROM, we need to shift 16 bits
- * in from the EEPROM. Bits are "shifted in" by raising the clock input to
- * the EEPROM (setting the SK bit), and then reading the value of the "DO"
- * bit. During this "shifting in" process the "DI" bit should always be
- * clear..
- */
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
- data = 0;
-
- for (i = 0; i < 16; i++) {
- data = data << 1;
- ixgb_raise_clock(hw, &eecd_reg);
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_DI);
- if (eecd_reg & IXGB_EECD_DO)
- data |= 1;
-
- ixgb_lower_clock(hw, &eecd_reg);
- }
-
- return data;
-}
-
-/******************************************************************************
- * Prepares EEPROM for access
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
- * function should be called before issuing a command to the EEPROM.
- *****************************************************************************/
-static void
-ixgb_setup_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Clear SK and DI */
- eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-
- /* Set CS */
- eecd_reg |= IXGB_EECD_CS;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-}
-
-/******************************************************************************
- * Returns EEPROM to a "standby" state
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_standby_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Deselect EEPROM */
- eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Clock high */
- eecd_reg |= IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Select EEPROM */
- eecd_reg |= IXGB_EECD_CS;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Clock low */
- eecd_reg &= ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Raises then lowers the EEPROM's clock pin
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clock_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Rising edge of clock */
- eecd_reg |= IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Falling edge of clock */
- eecd_reg &= ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Terminates a command by lowering the EEPROM's chip select pin
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_cleanup_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
-
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-
- ixgb_clock_eeprom(hw);
-}
-
-/******************************************************************************
- * Waits for the EEPROM to finish the current command.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * The command is done when the EEPROM's data out pin goes high.
- *
- * Returns:
- * true: EEPROM data pin is high before timeout.
- * false: Time expired.
- *****************************************************************************/
-static bool
-ixgb_wait_eeprom_command(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
- u32 i;
-
- /* Toggle the CS line. This in effect tells to EEPROM to actually execute
- * the command in question.
- */
- ixgb_standby_eeprom(hw);
-
- /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will
- * signal that the command has been completed by raising the DO signal.
- * If DO does not go high in 10 milliseconds, then error out.
- */
- for (i = 0; i < 200; i++) {
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- if (eecd_reg & IXGB_EECD_DO)
- return true;
-
- udelay(50);
- }
- ASSERT(0);
- return false;
-}
-
-/******************************************************************************
- * Verifies that the EEPROM has a valid checksum
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
- * valid.
- *
- * Returns:
- * true: Checksum is valid
- * false: Checksum is not valid.
- *****************************************************************************/
-bool
-ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
-{
- u16 checksum = 0;
- u16 i;
-
- for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
- checksum += ixgb_read_eeprom(hw, i);
-
- if (checksum == (u16) EEPROM_SUM)
- return true;
- else
- return false;
-}
-
-/******************************************************************************
- * Calculates the EEPROM checksum and writes it to the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
- * Writes the difference to word offset 63 of the EEPROM.
- *****************************************************************************/
-void
-ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
-{
- u16 checksum = 0;
- u16 i;
-
- for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
- checksum += ixgb_read_eeprom(hw, i);
-
- checksum = (u16) EEPROM_SUM - checksum;
-
- ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
-}
-
-/******************************************************************************
- * Writes a 16 bit word to a given offset in the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * reg - offset within the EEPROM to be written to
- * data - 16 bit word to be written to the EEPROM
- *
- * If ixgb_update_eeprom_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- *
- *****************************************************************************/
-void
-ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- /* Prepare the EEPROM for writing */
- ixgb_setup_eeprom(hw);
-
- /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
- * plus 4-bit dummy). This puts the EEPROM into write/erase mode.
- */
- ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
- ixgb_shift_out_bits(hw, 0, 4);
-
- /* Prepare the EEPROM */
- ixgb_standby_eeprom(hw);
-
- /* Send the Write command (3-bit opcode + 6-bit addr) */
- ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
- ixgb_shift_out_bits(hw, offset, 6);
-
- /* Send the data */
- ixgb_shift_out_bits(hw, data, 16);
-
- ixgb_wait_eeprom_command(hw);
-
- /* Recover from write */
- ixgb_standby_eeprom(hw);
-
- /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
- * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
- * mode.
- */
- ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
- ixgb_shift_out_bits(hw, 0, 4);
-
- /* Done with writing */
- ixgb_cleanup_eeprom(hw);
-
- /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
- ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
-}
-
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of 16 bit word in the EEPROM to read
- *
- * Returns:
- * The 16-bit value read from the eeprom
- *****************************************************************************/
-u16
-ixgb_read_eeprom(struct ixgb_hw *hw,
- u16 offset)
-{
- u16 data;
-
- /* Prepare the EEPROM for reading */
- ixgb_setup_eeprom(hw);
-
- /* Send the READ command (opcode + addr) */
- ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
- /*
- * We have a 64 word EEPROM, there are 6 address bits
- */
- ixgb_shift_out_bits(hw, offset, 6);
-
- /* Read the data */
- data = ixgb_shift_in_bits(hw);
-
- /* End this read operation */
- ixgb_standby_eeprom(hw);
-
- return data;
-}
-
-/******************************************************************************
- * Reads eeprom and stores data in shared structure.
- * Validates eeprom checksum and eeprom signature.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * true: if eeprom read is successful
- * false: otherwise.
- *****************************************************************************/
-bool
-ixgb_get_eeprom_data(struct ixgb_hw *hw)
-{
- u16 i;
- u16 checksum = 0;
- struct ixgb_ee_map_type *ee_map;
-
- ENTER();
-
- ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- pr_debug("Reading eeprom data\n");
- for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
- u16 ee_data;
- ee_data = ixgb_read_eeprom(hw, i);
- checksum += ee_data;
- hw->eeprom[i] = cpu_to_le16(ee_data);
- }
-
- if (checksum != (u16) EEPROM_SUM) {
- pr_debug("Checksum invalid\n");
- /* clear the init_ctrl_reg_1 to signify that the cache is
- * invalidated */
- ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
- return false;
- }
-
- if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
- != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- pr_debug("Signature invalid\n");
- return false;
- }
-
- return true;
-}
-
-/******************************************************************************
- * Local function to check if the eeprom signature is good
- * If the eeprom signature is good, calls ixgb)get_eeprom_data.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * true: eeprom signature was good and the eeprom read was successful
- * false: otherwise.
- ******************************************************************************/
-static bool
-ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
- == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- return true;
- } else {
- return ixgb_get_eeprom_data(hw);
- }
-}
-
-/******************************************************************************
- * return a word from the eeprom
- *
- * hw - Struct containing variables accessed by shared code
- * index - Offset of eeprom word
- *
- * Returns:
- * Word at indexed offset in eeprom, if valid, 0 otherwise.
- ******************************************************************************/
-__le16
-ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index)
-{
-
- if (index < IXGB_EEPROM_SIZE && ixgb_check_and_get_eeprom_data(hw))
- return hw->eeprom[index];
-
- return 0;
-}
-
-/******************************************************************************
- * return the mac address from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
- *
- * Returns: None.
- ******************************************************************************/
-void
-ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
- u8 *mac_addr)
-{
- int i;
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- ENTER();
-
- if (ixgb_check_and_get_eeprom_data(hw)) {
- for (i = 0; i < ETH_ALEN; i++) {
- mac_addr[i] = ee_map->mac_addr[i];
- }
- pr_debug("eeprom mac address = %pM\n", mac_addr);
- }
-}
-
-
-/******************************************************************************
- * return the Printed Board Assembly number from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * PBA number if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-u32
-ixgb_get_ee_pba_number(struct ixgb_hw *hw)
-{
- if (ixgb_check_and_get_eeprom_data(hw))
- return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
- | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16);
-
- return 0;
-}
-
-
-/******************************************************************************
- * return the Device Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Device Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-u16
-ixgb_get_ee_device_id(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if (ixgb_check_and_get_eeprom_data(hw))
- return le16_to_cpu(ee_map->device_id);
-
- return 0;
-}
-
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ee.h b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
deleted file mode 100644
index 3ee0a09e5d0a..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#ifndef _IXGB_EE_H_
-#define _IXGB_EE_H_
-
-#define IXGB_EEPROM_SIZE 64 /* Size in words */
-
-/* EEPROM Commands */
-#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */
-#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */
-#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */
-#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */
-
-/* EEPROM MAP (Word Offsets) */
-#define EEPROM_IA_1_2_REG 0x0000
-#define EEPROM_IA_3_4_REG 0x0001
-#define EEPROM_IA_5_6_REG 0x0002
-#define EEPROM_COMPATIBILITY_REG 0x0003
-#define EEPROM_PBA_1_2_REG 0x0008
-#define EEPROM_PBA_3_4_REG 0x0009
-#define EEPROM_INIT_CONTROL1_REG 0x000A
-#define EEPROM_SUBSYS_ID_REG 0x000B
-#define EEPROM_SUBVEND_ID_REG 0x000C
-#define EEPROM_DEVICE_ID_REG 0x000D
-#define EEPROM_VENDOR_ID_REG 0x000E
-#define EEPROM_INIT_CONTROL2_REG 0x000F
-#define EEPROM_SWDPINS_REG 0x0020
-#define EEPROM_CIRCUIT_CTRL_REG 0x0021
-#define EEPROM_D0_D3_POWER_REG 0x0022
-#define EEPROM_FLASH_VERSION 0x0032
-#define EEPROM_CHECKSUM_REG 0x003F
-
-/* Mask bits for fields in Word 0x0a of the EEPROM */
-
-#define EEPROM_ICW1_SIGNATURE_MASK 0xC000
-#define EEPROM_ICW1_SIGNATURE_VALID 0x4000
-#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000
-
-/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
-#define EEPROM_SUM 0xBABA
-
-/* EEPROM Map Sizes (Byte Counts) */
-#define PBA_SIZE 4
-
-/* EEPROM Map defines (WORD OFFSETS)*/
-
-/* EEPROM structure */
-struct ixgb_ee_map_type {
- u8 mac_addr[ETH_ALEN];
- __le16 compatibility;
- __le16 reserved1[4];
- __le32 pba_number;
- __le16 init_ctrl_reg_1;
- __le16 subsystem_id;
- __le16 subvendor_id;
- __le16 device_id;
- __le16 vendor_id;
- __le16 init_ctrl_reg_2;
- __le16 oem_reserved[16];
- __le16 swdpins_reg;
- __le16 circuit_ctrl_reg;
- u8 d3_power;
- u8 d0_power;
- __le16 reserved2[28];
- __le16 checksum;
-};
-
-/* EEPROM Functions */
-u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg);
-
-bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
-
-void ixgb_update_eeprom_checksum(struct ixgb_hw *hw);
-
-void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data);
-
-#endif /* IXGB_EE_H */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
deleted file mode 100644
index efa980514944..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
+++ /dev/null
@@ -1,642 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-/* ethtool support for ixgb */
-
-#include "ixgb.h"
-
-#include <linux/uaccess.h>
-
-#define IXGB_ALL_RAR_ENTRIES 16
-
-enum {NETDEV_STATS, IXGB_STATS};
-
-struct ixgb_stats {
- char stat_string[ETH_GSTRING_LEN];
- int type;
- int sizeof_stat;
- int stat_offset;
-};
-
-#define IXGB_STAT(m) IXGB_STATS, \
- sizeof_field(struct ixgb_adapter, m), \
- offsetof(struct ixgb_adapter, m)
-#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \
- sizeof_field(struct net_device, m), \
- offsetof(struct net_device, m)
-
-static struct ixgb_stats ixgb_gstrings_stats[] = {
- {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
- {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
- {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
- {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
- {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
- {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
- {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
- {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
- {"multicast", IXGB_NETDEV_STAT(stats.multicast)},
- {"collisions", IXGB_NETDEV_STAT(stats.collisions)},
-
-/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */
- {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
- {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
- {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
- {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
- {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
- {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
- {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
- {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
- {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
- {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
- {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
- {"tx_deferred_ok", IXGB_STAT(stats.dc)},
- {"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
- {"tx_restart_queue", IXGB_STAT(restart_queue) },
- {"rx_long_length_errors", IXGB_STAT(stats.roc)},
- {"rx_short_length_errors", IXGB_STAT(stats.ruc)},
- {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)},
- {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)},
- {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)},
- {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)},
- {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)},
- {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)},
- {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)},
- {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)},
- {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)},
- {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)}
-};
-
-#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats)
-
-static int
-ixgb_get_link_ksettings(struct net_device *netdev,
- struct ethtool_link_ksettings *cmd)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- ethtool_link_ksettings_zero_link_mode(cmd, supported);
- ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
-
- ethtool_link_ksettings_zero_link_mode(cmd, advertising);
- ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseT_Full);
- ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
-
- cmd->base.port = PORT_FIBRE;
-
- if (netif_carrier_ok(adapter->netdev)) {
- cmd->base.speed = SPEED_10000;
- cmd->base.duplex = DUPLEX_FULL;
- } else {
- cmd->base.speed = SPEED_UNKNOWN;
- cmd->base.duplex = DUPLEX_UNKNOWN;
- }
-
- cmd->base.autoneg = AUTONEG_DISABLE;
- return 0;
-}
-
-void ixgb_set_speed_duplex(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- /* be optimistic about our link, since we were up before */
- adapter->link_speed = 10000;
- adapter->link_duplex = FULL_DUPLEX;
- netif_carrier_on(netdev);
- netif_wake_queue(netdev);
-}
-
-static int
-ixgb_set_link_ksettings(struct net_device *netdev,
- const struct ethtool_link_ksettings *cmd)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 speed = cmd->base.speed;
-
- if (cmd->base.autoneg == AUTONEG_ENABLE ||
- (speed + cmd->base.duplex != SPEED_10000 + DUPLEX_FULL))
- return -EINVAL;
-
- if (netif_running(adapter->netdev)) {
- ixgb_down(adapter, true);
- ixgb_reset(adapter);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
-
- return 0;
-}
-
-static void
-ixgb_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
-
- pause->autoneg = AUTONEG_DISABLE;
-
- if (hw->fc.type == ixgb_fc_rx_pause)
- pause->rx_pause = 1;
- else if (hw->fc.type == ixgb_fc_tx_pause)
- pause->tx_pause = 1;
- else if (hw->fc.type == ixgb_fc_full) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
- }
-}
-
-static int
-ixgb_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
-
- if (pause->autoneg == AUTONEG_ENABLE)
- return -EINVAL;
-
- if (pause->rx_pause && pause->tx_pause)
- hw->fc.type = ixgb_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc.type = ixgb_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc.type = ixgb_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc.type = ixgb_fc_none;
-
- if (netif_running(adapter->netdev)) {
- ixgb_down(adapter, true);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
-
- return 0;
-}
-
-static u32
-ixgb_get_msglevel(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void
-ixgb_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_
-
-static int
-ixgb_get_regs_len(struct net_device *netdev)
-{
-#define IXGB_REG_DUMP_LEN 136*sizeof(u32)
- return IXGB_REG_DUMP_LEN;
-}
-
-static void
-ixgb_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u32 *reg = p;
- u32 *reg_start = reg;
- u8 i;
-
- /* the 1 (one) below indicates an attempt at versioning, if the
- * interface in ethtool or the driver changes, this 1 should be
- * incremented */
- regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
-
- /* General Registers */
- *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */
- *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */
- *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */
- *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */
- *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */
-
- /* Interrupt */
- *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */
- *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */
- *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */
- *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */
-
- /* Receive */
- *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */
- *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */
- *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */
- *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */
- *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */
- *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */
- *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */
- *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */
- *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */
- *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */
- *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
- *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
-
- /* there are 16 RAR entries in hardware, we only use 3 */
- for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
- *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
- *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
- }
-
- /* Transmit */
- *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */
- *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */
- *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */
- *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */
- *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */
- *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */
- *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */
- *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */
- *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */
- *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */
-
- /* Physical */
- *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */
- *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */
- *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */
- *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */
- *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */
- *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */
- *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */
- *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */
- *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */
- *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */
- *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */
- *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */
- *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */
-
- /* Statistics */
- *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */
- *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */
- *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */
- *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */
- *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */
- *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */
- *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */
- *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */
- *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */
- *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */
- *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */
- *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */
- *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */
- *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */
- *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */
- *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */
- *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */
- *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */
- *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */
- *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */
- *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */
- *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */
- *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */
- *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */
- *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */
- *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */
- *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */
- *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */
- *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */
- *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */
- *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */
- *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */
- *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */
- *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */
- *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */
- *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */
- *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */
- *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */
- *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */
- *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */
- *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */
- *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */
- *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */
- *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */
- *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */
- *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */
- *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */
- *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */
- *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */
- *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */
- *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */
- *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */
- *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */
- *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */
- *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */
- *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */
- *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */
- *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */
- *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */
- *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */
-
- regs->len = (reg - reg_start) * sizeof(u32);
-}
-
-static int
-ixgb_get_eeprom_len(struct net_device *netdev)
-{
- /* return size in bytes */
- return IXGB_EEPROM_SIZE << 1;
-}
-
-static int
-ixgb_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- __le16 *eeprom_buff;
- int i, max_len, first_word, last_word;
- int ret_val = 0;
-
- if (eeprom->len == 0) {
- ret_val = -EINVAL;
- goto geeprom_error;
- }
-
- eeprom->magic = hw->vendor_id | (hw->device_id << 16);
-
- max_len = ixgb_get_eeprom_len(netdev);
-
- if (eeprom->offset > eeprom->offset + eeprom->len) {
- ret_val = -EINVAL;
- goto geeprom_error;
- }
-
- if ((eeprom->offset + eeprom->len) > max_len)
- eeprom->len = (max_len - eeprom->offset);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-
- eeprom_buff = kmalloc_array(last_word - first_word + 1,
- sizeof(__le16),
- GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- /* note the eeprom was good because the driver loaded */
- for (i = 0; i <= (last_word - first_word); i++)
- eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
- kfree(eeprom_buff);
-
-geeprom_error:
- return ret_val;
-}
-
-static int
-ixgb_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- void *ptr;
- int max_len, first_word, last_word;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
- return -EFAULT;
-
- max_len = ixgb_get_eeprom_len(netdev);
-
- if (eeprom->offset > eeprom->offset + eeprom->len)
- return -EINVAL;
-
- if ((eeprom->offset + eeprom->len) > max_len)
- eeprom->len = (max_len - eeprom->offset);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ptr = (void *)eeprom_buff;
-
- if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
- eeprom_buff[0] = ixgb_read_eeprom(hw, first_word);
- ptr++;
- }
- if ((eeprom->offset + eeprom->len) & 1) {
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
- eeprom_buff[last_word - first_word]
- = ixgb_read_eeprom(hw, last_word);
- }
-
- memcpy(ptr, bytes, eeprom->len);
- for (i = 0; i <= (last_word - first_word); i++)
- ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]);
-
- /* Update the checksum over the first part of the EEPROM if needed */
- if (first_word <= EEPROM_CHECKSUM_REG)
- ixgb_update_eeprom_checksum(hw);
-
- kfree(eeprom_buff);
- return 0;
-}
-
-static void
-ixgb_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- strscpy(drvinfo->driver, ixgb_driver_name,
- sizeof(drvinfo->driver));
- strscpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info));
-}
-
-static void
-ixgb_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring,
- struct kernel_ethtool_ringparam *kernel_ring,
- struct netlink_ext_ack *extack)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
-
- ring->rx_max_pending = MAX_RXD;
- ring->tx_max_pending = MAX_TXD;
- ring->rx_pending = rxdr->count;
- ring->tx_pending = txdr->count;
-}
-
-static int
-ixgb_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring,
- struct kernel_ethtool_ringparam *kernel_ring,
- struct netlink_ext_ack *extack)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
- struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
- int err;
-
- tx_old = adapter->tx_ring;
- rx_old = adapter->rx_ring;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- if (netif_running(adapter->netdev))
- ixgb_down(adapter, true);
-
- rxdr->count = max(ring->rx_pending,(u32)MIN_RXD);
- rxdr->count = min(rxdr->count,(u32)MAX_RXD);
- rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
-
- txdr->count = max(ring->tx_pending,(u32)MIN_TXD);
- txdr->count = min(txdr->count,(u32)MAX_TXD);
- txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if (netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
- if ((err = ixgb_setup_rx_resources(adapter)))
- goto err_setup_rx;
- if ((err = ixgb_setup_tx_resources(adapter)))
- goto err_setup_tx;
-
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
-
- rx_new = adapter->rx_ring;
- tx_new = adapter->tx_ring;
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- ixgb_free_rx_resources(adapter);
- ixgb_free_tx_resources(adapter);
- adapter->rx_ring = rx_new;
- adapter->tx_ring = tx_new;
- if ((err = ixgb_up(adapter)))
- return err;
- ixgb_set_speed_duplex(netdev);
- }
-
- return 0;
-err_setup_tx:
- ixgb_free_rx_resources(adapter);
-err_setup_rx:
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- ixgb_up(adapter);
- return err;
-}
-
-static int
-ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- return 2;
-
- case ETHTOOL_ID_ON:
- ixgb_led_on(&adapter->hw);
- break;
-
- case ETHTOOL_ID_OFF:
- case ETHTOOL_ID_INACTIVE:
- ixgb_led_off(&adapter->hw);
- }
-
- return 0;
-}
-
-static int
-ixgb_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return IXGB_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void
-ixgb_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int i;
- char *p = NULL;
-
- ixgb_update_stats(adapter);
- for (i = 0; i < IXGB_STATS_LEN; i++) {
- switch (ixgb_gstrings_stats[i].type) {
- case NETDEV_STATS:
- p = (char *) netdev +
- ixgb_gstrings_stats[i].stat_offset;
- break;
- case IXGB_STATS:
- p = (char *) adapter +
- ixgb_gstrings_stats[i].stat_offset;
- break;
- }
-
- data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-}
-
-static void
-ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-{
- int i;
-
- switch(stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < IXGB_STATS_LEN; i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- ixgb_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- }
- break;
- }
-}
-
-static const struct ethtool_ops ixgb_ethtool_ops = {
- .get_drvinfo = ixgb_get_drvinfo,
- .get_regs_len = ixgb_get_regs_len,
- .get_regs = ixgb_get_regs,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = ixgb_get_eeprom_len,
- .get_eeprom = ixgb_get_eeprom,
- .set_eeprom = ixgb_set_eeprom,
- .get_ringparam = ixgb_get_ringparam,
- .set_ringparam = ixgb_set_ringparam,
- .get_pauseparam = ixgb_get_pauseparam,
- .set_pauseparam = ixgb_set_pauseparam,
- .get_msglevel = ixgb_get_msglevel,
- .set_msglevel = ixgb_set_msglevel,
- .get_strings = ixgb_get_strings,
- .set_phys_id = ixgb_set_phys_id,
- .get_sset_count = ixgb_get_sset_count,
- .get_ethtool_stats = ixgb_get_ethtool_stats,
- .get_link_ksettings = ixgb_get_link_ksettings,
- .set_link_ksettings = ixgb_set_link_ksettings,
-};
-
-void ixgb_set_ethtool_ops(struct net_device *netdev)
-{
- netdev->ethtool_ops = &ixgb_ethtool_ops;
-}
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.c b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
deleted file mode 100644
index 98bd3267b99b..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
+++ /dev/null
@@ -1,1229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-/* ixgb_hw.c
- * Shared functions for accessing and configuring the adapter
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/pci_ids.h>
-#include "ixgb_hw.h"
-#include "ixgb_ids.h"
-
-#include <linux/etherdevice.h>
-
-/* Local function prototypes */
-
-static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
-
-static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value);
-
-static void ixgb_get_bus_info(struct ixgb_hw *hw);
-
-static bool ixgb_link_reset(struct ixgb_hw *hw);
-
-static void ixgb_optics_reset(struct ixgb_hw *hw);
-
-static void ixgb_optics_reset_bcm(struct ixgb_hw *hw);
-
-static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);
-
-static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
-
-static void ixgb_clear_vfta(struct ixgb_hw *hw);
-
-static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
-
-static u16 ixgb_read_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type);
-
-static bool ixgb_setup_fc(struct ixgb_hw *hw);
-
-static bool mac_addr_valid(u8 *mac_addr);
-
-static u32 ixgb_mac_reset(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
-
- ctrl_reg = IXGB_CTRL0_RST |
- IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */
- IXGB_CTRL0_SDP2_DIR |
- IXGB_CTRL0_SDP1_DIR |
- IXGB_CTRL0_SDP0_DIR |
- IXGB_CTRL0_SDP3 | /* Initial value 1101 */
- IXGB_CTRL0_SDP2 |
- IXGB_CTRL0_SDP0;
-
-#ifdef HP_ZX1
- /* Workaround for 82597EX reset errata */
- IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg);
-#else
- IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
-#endif
-
- /* Delay a few ms just to allow the reset to complete */
- msleep(IXGB_DELAY_AFTER_RESET);
- ctrl_reg = IXGB_READ_REG(hw, CTRL0);
-#ifdef DBG
- /* Make sure the self-clearing global reset bit did self clear */
- ASSERT(!(ctrl_reg & IXGB_CTRL0_RST));
-#endif
-
- if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN) {
- ctrl_reg = /* Enable interrupt from XFP and SerDes */
- IXGB_CTRL1_GPI0_EN |
- IXGB_CTRL1_SDP6_DIR |
- IXGB_CTRL1_SDP7_DIR |
- IXGB_CTRL1_SDP6 |
- IXGB_CTRL1_SDP7;
- IXGB_WRITE_REG(hw, CTRL1, ctrl_reg);
- ixgb_optics_reset_bcm(hw);
- }
-
- if (hw->phy_type == ixgb_phy_type_txn17401)
- ixgb_optics_reset(hw);
-
- return ctrl_reg;
-}
-
-/******************************************************************************
- * Reset the transmit and receive units; mask and clear all interrupts.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-bool
-ixgb_adapter_stop(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
-
- ENTER();
-
- /* If we are stopped or resetting exit gracefully and wait to be
- * started again before accessing the hardware.
- */
- if (hw->adapter_stopped) {
- pr_debug("Exiting because the adapter is already stopped!!!\n");
- return false;
- }
-
- /* Set the Adapter Stopped flag so other driver functions stop
- * touching the Hardware.
- */
- hw->adapter_stopped = true;
-
- /* Clear interrupt mask to stop board from generating interrupts */
- pr_debug("Masking off all interrupts\n");
- IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF);
-
- /* Disable the Transmit and Receive units. Then delay to allow
- * any pending transactions to complete before we hit the MAC with
- * the global reset.
- */
- IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
- IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
- IXGB_WRITE_FLUSH(hw);
- msleep(IXGB_DELAY_BEFORE_RESET);
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- pr_debug("Issuing a global reset to MAC\n");
-
- ctrl_reg = ixgb_mac_reset(hw);
-
- /* Clear interrupt mask to stop board from generating interrupts */
- pr_debug("Masking off all interrupts\n");
- IXGB_WRITE_REG(hw, IMC, 0xffffffff);
-
- /* Clear any pending interrupt events. */
- IXGB_READ_REG(hw, ICR);
-
- return ctrl_reg & IXGB_CTRL0_RST;
-}
-
-
-/******************************************************************************
- * Identifies the vendor of the optics module on the adapter. The SR adapters
- * support two different types of XPAK optics, so it is necessary to determine
- * which optics are present before applying any optics-specific workarounds.
- *
- * hw - Struct containing variables accessed by shared code.
- *
- * Returns: the vendor of the XPAK optics module.
- *****************************************************************************/
-static ixgb_xpak_vendor
-ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
-{
- u32 i;
- u16 vendor_name[5];
- ixgb_xpak_vendor xpak_vendor;
-
- ENTER();
-
- /* Read the first few bytes of the vendor string from the XPAK NVR
- * registers. These are standard XENPAK/XPAK registers, so all XPAK
- * devices should implement them. */
- for (i = 0; i < 5; i++) {
- vendor_name[i] = ixgb_read_phy_reg(hw,
- MDIO_PMA_PMD_XPAK_VENDOR_NAME
- + i, IXGB_PHY_ADDRESS,
- MDIO_MMD_PMAPMD);
- }
-
- /* Determine the actual vendor */
- if (vendor_name[0] == 'I' &&
- vendor_name[1] == 'N' &&
- vendor_name[2] == 'T' &&
- vendor_name[3] == 'E' && vendor_name[4] == 'L') {
- xpak_vendor = ixgb_xpak_vendor_intel;
- } else {
- xpak_vendor = ixgb_xpak_vendor_infineon;
- }
-
- return xpak_vendor;
-}
-
-/******************************************************************************
- * Determine the physical layer module on the adapter.
- *
- * hw - Struct containing variables accessed by shared code. The device_id
- * field must be (correctly) populated before calling this routine.
- *
- * Returns: the phy type of the adapter.
- *****************************************************************************/
-static ixgb_phy_type
-ixgb_identify_phy(struct ixgb_hw *hw)
-{
- ixgb_phy_type phy_type;
- ixgb_xpak_vendor xpak_vendor;
-
- ENTER();
-
- /* Infer the transceiver/phy type from the device id */
- switch (hw->device_id) {
- case IXGB_DEVICE_ID_82597EX:
- pr_debug("Identified TXN17401 optics\n");
- phy_type = ixgb_phy_type_txn17401;
- break;
-
- case IXGB_DEVICE_ID_82597EX_SR:
- /* The SR adapters carry two different types of XPAK optics
- * modules; read the vendor identifier to determine the exact
- * type of optics. */
- xpak_vendor = ixgb_identify_xpak_vendor(hw);
- if (xpak_vendor == ixgb_xpak_vendor_intel) {
- pr_debug("Identified TXN17201 optics\n");
- phy_type = ixgb_phy_type_txn17201;
- } else {
- pr_debug("Identified G6005 optics\n");
- phy_type = ixgb_phy_type_g6005;
- }
- break;
- case IXGB_DEVICE_ID_82597EX_LR:
- pr_debug("Identified G6104 optics\n");
- phy_type = ixgb_phy_type_g6104;
- break;
- case IXGB_DEVICE_ID_82597EX_CX4:
- pr_debug("Identified CX4\n");
- xpak_vendor = ixgb_identify_xpak_vendor(hw);
- if (xpak_vendor == ixgb_xpak_vendor_intel) {
- pr_debug("Identified TXN17201 optics\n");
- phy_type = ixgb_phy_type_txn17201;
- } else {
- pr_debug("Identified G6005 optics\n");
- phy_type = ixgb_phy_type_g6005;
- }
- break;
- default:
- pr_debug("Unknown physical layer module\n");
- phy_type = ixgb_phy_type_unknown;
- break;
- }
-
- /* update phy type for sun specific board */
- if (hw->subsystem_vendor_id == PCI_VENDOR_ID_SUN)
- phy_type = ixgb_phy_type_bcm;
-
- return phy_type;
-}
-
-/******************************************************************************
- * Performs basic configuration of the adapter.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Resets the controller.
- * Reads and validates the EEPROM.
- * Initializes the receive address registers.
- * Initializes the multicast table.
- * Clears all on-chip counters.
- * Calls routine to setup flow control settings.
- * Leaves the transmit and receive units disabled and uninitialized.
- *
- * Returns:
- * true if successful,
- * false if unrecoverable problems were encountered.
- *****************************************************************************/
-bool
-ixgb_init_hw(struct ixgb_hw *hw)
-{
- u32 i;
- bool status;
-
- ENTER();
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- pr_debug("Issuing a global reset to MAC\n");
-
- ixgb_mac_reset(hw);
-
- pr_debug("Issuing an EE reset to MAC\n");
-#ifdef HP_ZX1
- /* Workaround for 82597EX reset errata */
- IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST);
-#else
- IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST);
-#endif
-
- /* Delay a few ms just to allow the reset to complete */
- msleep(IXGB_DELAY_AFTER_EE_RESET);
-
- if (!ixgb_get_eeprom_data(hw))
- return false;
-
- /* Use the device id to determine the type of phy/transceiver. */
- hw->device_id = ixgb_get_ee_device_id(hw);
- hw->phy_type = ixgb_identify_phy(hw);
-
- /* Setup the receive addresses.
- * Receive Address Registers (RARs 0 - 15).
- */
- ixgb_init_rx_addrs(hw);
-
- /*
- * Check that a valid MAC address has been set.
- * If it is not valid, we fail hardware init.
- */
- if (!mac_addr_valid(hw->curr_mac_addr)) {
- pr_debug("MAC address invalid after ixgb_init_rx_addrs\n");
- return(false);
- }
-
- /* tell the routines in this file they can access hardware again */
- hw->adapter_stopped = false;
-
- /* Fill in the bus_info structure */
- ixgb_get_bus_info(hw);
-
- /* Zero out the Multicast HASH table */
- pr_debug("Zeroing the MTA\n");
- for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
- IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
-
- /* Zero out the VLAN Filter Table Array */
- ixgb_clear_vfta(hw);
-
- /* Zero all of the hardware counters */
- ixgb_clear_hw_cntrs(hw);
-
- /* Call a subroutine to setup flow control. */
- status = ixgb_setup_fc(hw);
-
- /* 82597EX errata: Call check-for-link in case lane deskew is locked */
- ixgb_check_for_link(hw);
-
- return status;
-}
-
-/******************************************************************************
- * Initializes receive address filters.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- *****************************************************************************/
-static void
-ixgb_init_rx_addrs(struct ixgb_hw *hw)
-{
- u32 i;
-
- ENTER();
-
- /*
- * If the current mac address is valid, assume it is a software override
- * to the permanent address.
- * Otherwise, use the permanent address from the eeprom.
- */
- if (!mac_addr_valid(hw->curr_mac_addr)) {
-
- /* Get the MAC address from the eeprom for later reference */
- ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr);
-
- pr_debug("Keeping Permanent MAC Addr = %pM\n",
- hw->curr_mac_addr);
- } else {
-
- /* Setup the receive address. */
- pr_debug("Overriding MAC Address in RAR[0]\n");
- pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr);
-
- ixgb_rar_set(hw, hw->curr_mac_addr, 0);
- }
-
- /* Zero out the other 15 receive addresses. */
- pr_debug("Clearing RAR[1-15]\n");
- for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
- /* Write high reg first to disable the AV bit first */
- IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- }
-}
-
-/******************************************************************************
- * Updates the MAC's list of multicast addresses.
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr_list - the list of new multicast addresses
- * mc_addr_count - number of addresses
- * pad - number of bytes between addresses in the list
- *
- * The given list replaces any existing list. Clears the last 15 receive
- * address registers and the multicast table. Uses receive address registers
- * for the first 15 multicast addresses, and hashes the rest into the
- * multicast table.
- *****************************************************************************/
-void
-ixgb_mc_addr_list_update(struct ixgb_hw *hw,
- u8 *mc_addr_list,
- u32 mc_addr_count,
- u32 pad)
-{
- u32 hash_value;
- u32 i;
- u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
- u8 *mca;
-
- ENTER();
-
- /* Set the new number of MC addresses that we are being requested to use. */
- hw->num_mc_addrs = mc_addr_count;
-
- /* Clear RAR[1-15] */
- pr_debug("Clearing RAR[1-15]\n");
- for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- }
-
- /* Clear the MTA */
- pr_debug("Clearing MTA\n");
- for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
- IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
-
- /* Add the new addresses */
- mca = mc_addr_list;
- for (i = 0; i < mc_addr_count; i++) {
- pr_debug("Adding the multicast addresses:\n");
- pr_debug("MC Addr #%d = %pM\n", i, mca);
-
- /* Place this multicast address in the RAR if there is room, *
- * else put it in the MTA
- */
- if (rar_used_count < IXGB_RAR_ENTRIES) {
- ixgb_rar_set(hw, mca, rar_used_count);
- pr_debug("Added a multicast address to RAR[%d]\n", i);
- rar_used_count++;
- } else {
- hash_value = ixgb_hash_mc_addr(hw, mca);
-
- pr_debug("Hash value = 0x%03X\n", hash_value);
-
- ixgb_mta_set(hw, hash_value);
- }
-
- mca += ETH_ALEN + pad;
- }
-
- pr_debug("MC Update Complete\n");
-}
-
-/******************************************************************************
- * Hashes an address to determine its location in the multicast table
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *
- * Returns:
- * The hash value
- *****************************************************************************/
-static u32
-ixgb_hash_mc_addr(struct ixgb_hw *hw,
- u8 *mc_addr)
-{
- u32 hash_value = 0;
-
- ENTER();
-
- /* The portion of the address that is used for the hash table is
- * determined by the mc_filter_type setting.
- */
- switch (hw->mc_filter_type) {
- /* [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB - According to H/W docs */
- case 0:
- /* [47:36] i.e. 0x563 for above example address */
- hash_value =
- ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
- break;
- case 1: /* [46:35] i.e. 0xAC6 for above example address */
- hash_value =
- ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
- break;
- case 2: /* [45:34] i.e. 0x5D8 for above example address */
- hash_value =
- ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
- break;
- case 3: /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
- break;
- default:
- /* Invalid mc_filter_type, what should we do? */
- pr_debug("MC filter type param set incorrectly\n");
- ASSERT(0);
- break;
- }
-
- hash_value &= 0xFFF;
- return hash_value;
-}
-
-/******************************************************************************
- * Sets the bit in the multicast table corresponding to the hash value.
- *
- * hw - Struct containing variables accessed by shared code
- * hash_value - Multicast address hash value
- *****************************************************************************/
-static void
-ixgb_mta_set(struct ixgb_hw *hw,
- u32 hash_value)
-{
- u32 hash_bit, hash_reg;
- u32 mta_reg;
-
- /* The MTA is a register array of 128 32-bit registers.
- * It is treated like an array of 4096 bits. We want to set
- * bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The register is determined by the
- * upper 7 bits of the hash value and the bit within that
- * register are determined by the lower 5 bits of the value.
- */
- hash_reg = (hash_value >> 5) & 0x7F;
- hash_bit = hash_value & 0x1F;
-
- mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg);
-
- mta_reg |= (1 << hash_bit);
-
- IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg);
-}
-
-/******************************************************************************
- * Puts an ethernet address into a receive address register.
- *
- * hw - Struct containing variables accessed by shared code
- * addr - Address to put into receive address register
- * index - Receive address register to write
- *****************************************************************************/
-void
-ixgb_rar_set(struct ixgb_hw *hw,
- const u8 *addr,
- u32 index)
-{
- u32 rar_low, rar_high;
-
- ENTER();
-
- /* HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] |
- ((u32)addr[1] << 8) |
- ((u32)addr[2] << 16) |
- ((u32)addr[3] << 24));
-
- rar_high = ((u32) addr[4] |
- ((u32)addr[5] << 8) |
- IXGB_RAH_AV);
-
- IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
- IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
-}
-
-/******************************************************************************
- * Writes a value to the specified offset in the VLAN filter table.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - Offset in VLAN filter table to write
- * value - Value to write into VLAN filter table
- *****************************************************************************/
-void
-ixgb_write_vfta(struct ixgb_hw *hw,
- u32 offset,
- u32 value)
-{
- IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-}
-
-/******************************************************************************
- * Clears the VLAN filter table
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clear_vfta(struct ixgb_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
- IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
-}
-
-/******************************************************************************
- * Configures the flow control settings based on SW configuration.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-
-static bool
-ixgb_setup_fc(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
- u32 pap_reg = 0; /* by default, assume no pause time */
- bool status = true;
-
- ENTER();
-
- /* Get the current control reg 0 settings */
- ctrl_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* Clear the Receive Pause Enable and Transmit Pause Enable bits */
- ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
-
- /* The possible values of the "flow_control" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.type) {
- case ixgb_fc_none: /* 0 */
- /* Set CMDC bit to disable Rx Flow control */
- ctrl_reg |= (IXGB_CTRL0_CMDC);
- break;
- case ixgb_fc_rx_pause: /* 1 */
- /* RX Flow control is enabled, and TX Flow control is
- * disabled.
- */
- ctrl_reg |= (IXGB_CTRL0_RPE);
- break;
- case ixgb_fc_tx_pause: /* 2 */
- /* TX Flow control is enabled, and RX Flow control is
- * disabled, by a software over-ride.
- */
- ctrl_reg |= (IXGB_CTRL0_TPE);
- pap_reg = hw->fc.pause_time;
- break;
- case ixgb_fc_full: /* 3 */
- /* Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
- pap_reg = hw->fc.pause_time;
- break;
- default:
- /* We should never get here. The value should be 0-3. */
- pr_debug("Flow control param set incorrectly\n");
- ASSERT(0);
- break;
- }
-
- /* Write the new settings */
- IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
-
- if (pap_reg != 0)
- IXGB_WRITE_REG(hw, PAP, pap_reg);
-
- /* Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames in not enabled, then these
- * registers will be set to 0.
- */
- if (!(hw->fc.type & ixgb_fc_tx_pause)) {
- IXGB_WRITE_REG(hw, FCRTL, 0);
- IXGB_WRITE_REG(hw, FCRTH, 0);
- } else {
- /* We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of XON
- * frames. */
- if (hw->fc.send_xon) {
- IXGB_WRITE_REG(hw, FCRTL,
- (hw->fc.low_water | IXGB_FCRTL_XONE));
- } else {
- IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water);
- }
- IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water);
- }
- return status;
-}
-
-/******************************************************************************
- * Reads a word from a device over the Management Data Interface (MDI) bus.
- * This interface is used to manage Physical layer devices.
- *
- * hw - Struct containing variables accessed by hw code
- * reg_address - Offset of device register being read.
- * phy_address - Address of device on MDI.
- *
- * Returns: Data word (16 bits) from MDI device.
- *
- * The 82597EX has support for several MDI access methods. This routine
- * uses the new protocol MDI Single Command and Address Operation.
- * This requires that first an address cycle command is sent, followed by a
- * read command.
- *****************************************************************************/
-static u16
-ixgb_read_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type)
-{
- u32 i;
- u32 data;
- u32 command = 0;
-
- ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
- ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
- ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
-
- /* Setup and write the address cycle command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the address cycle completed
- ** The COMMAND bit will clear when the operation is complete.
- ** This may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Address cycle complete, setup and write the read command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the read command completed
- ** The COMMAND bit will clear when the operation is complete.
- ** The read may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Operation is complete, get the data from the MDIO Read/Write Data
- * register and return.
- */
- data = IXGB_READ_REG(hw, MSRWD);
- data >>= IXGB_MSRWD_READ_DATA_SHIFT;
- return((u16) data);
-}
-
-/******************************************************************************
- * Writes a word to a device over the Management Data Interface (MDI) bus.
- * This interface is used to manage Physical layer devices.
- *
- * hw - Struct containing variables accessed by hw code
- * reg_address - Offset of device register being read.
- * phy_address - Address of device on MDI.
- * device_type - Also known as the Device ID or DID.
- * data - 16-bit value to be written
- *
- * Returns: void.
- *
- * The 82597EX has support for several MDI access methods. This routine
- * uses the new protocol MDI Single Command and Address Operation.
- * This requires that first an address cycle command is sent, followed by a
- * write command.
- *****************************************************************************/
-static void
-ixgb_write_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type,
- u16 data)
-{
- u32 i;
- u32 command = 0;
-
- ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
- ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
- ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
-
- /* Put the data in the MDIO Read/Write Data register */
- IXGB_WRITE_REG(hw, MSRWD, (u32)data);
-
- /* Setup and write the address cycle command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the address cycle completed
- ** The COMMAND bit will clear when the operation is complete.
- ** This may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Address cycle complete, setup and write the write command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the read command completed
- ** The COMMAND bit will clear when the operation is complete.
- ** The write may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Operation is complete, return. */
-}
-
-/******************************************************************************
- * Checks to see if the link status of the hardware has changed.
- *
- * hw - Struct containing variables accessed by hw code
- *
- * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
-void
-ixgb_check_for_link(struct ixgb_hw *hw)
-{
- u32 status_reg;
- u32 xpcss_reg;
-
- ENTER();
-
- xpcss_reg = IXGB_READ_REG(hw, XPCSS);
- status_reg = IXGB_READ_REG(hw, STATUS);
-
- if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
- (status_reg & IXGB_STATUS_LU)) {
- hw->link_up = true;
- } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
- (status_reg & IXGB_STATUS_LU)) {
- pr_debug("XPCSS Not Aligned while Status:LU is set\n");
- hw->link_up = ixgb_link_reset(hw);
- } else {
- /*
- * 82597EX errata. Since the lane deskew problem may prevent
- * link, reset the link before reporting link down.
- */
- hw->link_up = ixgb_link_reset(hw);
- }
- /* Anything else for 10 Gig?? */
-}
-
-/******************************************************************************
- * Check for a bad link condition that may have occurred.
- * The indication is that the RFC / LFC registers may be incrementing
- * continually. A full adapter reset is required to recover.
- *
- * hw - Struct containing variables accessed by hw code
- *
- * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
-bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
-{
- u32 newLFC, newRFC;
- bool bad_link_returncode = false;
-
- if (hw->phy_type == ixgb_phy_type_txn17401) {
- newLFC = IXGB_READ_REG(hw, LFC);
- newRFC = IXGB_READ_REG(hw, RFC);
- if ((hw->lastLFC + 250 < newLFC)
- || (hw->lastRFC + 250 < newRFC)) {
- pr_debug("BAD LINK! too many LFC/RFC since last check\n");
- bad_link_returncode = true;
- }
- hw->lastLFC = newLFC;
- hw->lastRFC = newRFC;
- }
-
- return bad_link_returncode;
-}
-
-/******************************************************************************
- * Clears all hardware statistics counters.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
-{
- ENTER();
-
- /* if we are stopped or resetting exit gracefully */
- if (hw->adapter_stopped) {
- pr_debug("Exiting because the adapter is stopped!!!\n");
- return;
- }
-
- IXGB_READ_REG(hw, TPRL);
- IXGB_READ_REG(hw, TPRH);
- IXGB_READ_REG(hw, GPRCL);
- IXGB_READ_REG(hw, GPRCH);
- IXGB_READ_REG(hw, BPRCL);
- IXGB_READ_REG(hw, BPRCH);
- IXGB_READ_REG(hw, MPRCL);
- IXGB_READ_REG(hw, MPRCH);
- IXGB_READ_REG(hw, UPRCL);
- IXGB_READ_REG(hw, UPRCH);
- IXGB_READ_REG(hw, VPRCL);
- IXGB_READ_REG(hw, VPRCH);
- IXGB_READ_REG(hw, JPRCL);
- IXGB_READ_REG(hw, JPRCH);
- IXGB_READ_REG(hw, GORCL);
- IXGB_READ_REG(hw, GORCH);
- IXGB_READ_REG(hw, TORL);
- IXGB_READ_REG(hw, TORH);
- IXGB_READ_REG(hw, RNBC);
- IXGB_READ_REG(hw, RUC);
- IXGB_READ_REG(hw, ROC);
- IXGB_READ_REG(hw, RLEC);
- IXGB_READ_REG(hw, CRCERRS);
- IXGB_READ_REG(hw, ICBC);
- IXGB_READ_REG(hw, ECBC);
- IXGB_READ_REG(hw, MPC);
- IXGB_READ_REG(hw, TPTL);
- IXGB_READ_REG(hw, TPTH);
- IXGB_READ_REG(hw, GPTCL);
- IXGB_READ_REG(hw, GPTCH);
- IXGB_READ_REG(hw, BPTCL);
- IXGB_READ_REG(hw, BPTCH);
- IXGB_READ_REG(hw, MPTCL);
- IXGB_READ_REG(hw, MPTCH);
- IXGB_READ_REG(hw, UPTCL);
- IXGB_READ_REG(hw, UPTCH);
- IXGB_READ_REG(hw, VPTCL);
- IXGB_READ_REG(hw, VPTCH);
- IXGB_READ_REG(hw, JPTCL);
- IXGB_READ_REG(hw, JPTCH);
- IXGB_READ_REG(hw, GOTCL);
- IXGB_READ_REG(hw, GOTCH);
- IXGB_READ_REG(hw, TOTL);
- IXGB_READ_REG(hw, TOTH);
- IXGB_READ_REG(hw, DC);
- IXGB_READ_REG(hw, PLT64C);
- IXGB_READ_REG(hw, TSCTC);
- IXGB_READ_REG(hw, TSCTFC);
- IXGB_READ_REG(hw, IBIC);
- IXGB_READ_REG(hw, RFC);
- IXGB_READ_REG(hw, LFC);
- IXGB_READ_REG(hw, PFRC);
- IXGB_READ_REG(hw, PFTC);
- IXGB_READ_REG(hw, MCFRC);
- IXGB_READ_REG(hw, MCFTC);
- IXGB_READ_REG(hw, XONRXC);
- IXGB_READ_REG(hw, XONTXC);
- IXGB_READ_REG(hw, XOFFRXC);
- IXGB_READ_REG(hw, XOFFTXC);
- IXGB_READ_REG(hw, RJC);
-}
-
-/******************************************************************************
- * Turns on the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-void
-ixgb_led_on(struct ixgb_hw *hw)
-{
- u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* To turn on the LED, clear software-definable pin 0 (SDP0). */
- ctrl0_reg &= ~IXGB_CTRL0_SDP0;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
-}
-
-/******************************************************************************
- * Turns off the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-void
-ixgb_led_off(struct ixgb_hw *hw)
-{
- u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* To turn off the LED, set software-definable pin 0 (SDP0). */
- ctrl0_reg |= IXGB_CTRL0_SDP0;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
-}
-
-/******************************************************************************
- * Gets the current PCI bus type, speed, and width of the hardware
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_get_bus_info(struct ixgb_hw *hw)
-{
- u32 status_reg;
-
- status_reg = IXGB_READ_REG(hw, STATUS);
-
- hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ?
- ixgb_bus_type_pcix : ixgb_bus_type_pci;
-
- if (hw->bus.type == ixgb_bus_type_pci) {
- hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ?
- ixgb_bus_speed_66 : ixgb_bus_speed_33;
- } else {
- switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) {
- case IXGB_STATUS_PCIX_SPD_66:
- hw->bus.speed = ixgb_bus_speed_66;
- break;
- case IXGB_STATUS_PCIX_SPD_100:
- hw->bus.speed = ixgb_bus_speed_100;
- break;
- case IXGB_STATUS_PCIX_SPD_133:
- hw->bus.speed = ixgb_bus_speed_133;
- break;
- default:
- hw->bus.speed = ixgb_bus_speed_reserved;
- break;
- }
- }
-
- hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ?
- ixgb_bus_width_64 : ixgb_bus_width_32;
-}
-
-/******************************************************************************
- * Tests a MAC address to ensure it is a valid Individual Address
- *
- * mac_addr - pointer to MAC address.
- *
- *****************************************************************************/
-static bool
-mac_addr_valid(u8 *mac_addr)
-{
- bool is_valid = true;
- ENTER();
-
- /* Make sure it is not a multicast address */
- if (is_multicast_ether_addr(mac_addr)) {
- pr_debug("MAC address is multicast\n");
- is_valid = false;
- }
- /* Not a broadcast address */
- else if (is_broadcast_ether_addr(mac_addr)) {
- pr_debug("MAC address is broadcast\n");
- is_valid = false;
- }
- /* Reject the zero address */
- else if (is_zero_ether_addr(mac_addr)) {
- pr_debug("MAC address is all zeros\n");
- is_valid = false;
- }
- return is_valid;
-}
-
-/******************************************************************************
- * Resets the 10GbE link. Waits the settle time and returns the state of
- * the link.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static bool
-ixgb_link_reset(struct ixgb_hw *hw)
-{
- bool link_status = false;
- u8 wait_retries = MAX_RESET_ITERATIONS;
- u8 lrst_retries = MAX_RESET_ITERATIONS;
-
- do {
- /* Reset the link */
- IXGB_WRITE_REG(hw, CTRL0,
- IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST);
-
- /* Wait for link-up and lane re-alignment */
- do {
- udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET);
- link_status =
- ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU)
- && (IXGB_READ_REG(hw, XPCSS) &
- IXGB_XPCSS_ALIGN_STATUS)) ? true : false;
- } while (!link_status && --wait_retries);
-
- } while (!link_status && --lrst_retries);
-
- return link_status;
-}
-
-/******************************************************************************
- * Resets the 10GbE optics module.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_optics_reset(struct ixgb_hw *hw)
-{
- if (hw->phy_type == ixgb_phy_type_txn17401) {
- ixgb_write_phy_reg(hw,
- MDIO_CTRL1,
- IXGB_PHY_ADDRESS,
- MDIO_MMD_PMAPMD,
- MDIO_CTRL1_RESET);
-
- ixgb_read_phy_reg(hw, MDIO_CTRL1, IXGB_PHY_ADDRESS, MDIO_MMD_PMAPMD);
- }
-}
-
-/******************************************************************************
- * Resets the 10GbE optics module for Sun variant NIC.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-
-#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803
-#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164
-#define IXGB_BCM8704_USER_CTRL_REG 0xC800
-#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF
-#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003
-#define IXGB_SUN_PHY_ADDRESS 0x0000
-#define IXGB_SUN_PHY_RESET_DELAY 305
-
-static void
-ixgb_optics_reset_bcm(struct ixgb_hw *hw)
-{
- u32 ctrl = IXGB_READ_REG(hw, CTRL0);
- ctrl &= ~IXGB_CTRL0_SDP2;
- ctrl |= IXGB_CTRL0_SDP3;
- IXGB_WRITE_REG(hw, CTRL0, ctrl);
- IXGB_WRITE_FLUSH(hw);
-
- /* SerDes needs extra delay */
- msleep(IXGB_SUN_PHY_RESET_DELAY);
-
- /* Broadcom 7408L configuration */
- /* Reference clock config */
- ixgb_write_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL);
- /* we must read the registers twice */
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
-
- ixgb_write_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR,
- IXGB_BCM8704_USER_CTRL_REG_VAL);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
-
- /* SerDes needs extra delay */
- msleep(IXGB_SUN_PHY_RESET_DELAY);
-}
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_hw.h b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
deleted file mode 100644
index 70bcff5fb3db..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
+++ /dev/null
@@ -1,767 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#ifndef _IXGB_HW_H_
-#define _IXGB_HW_H_
-
-#include <linux/mdio.h>
-
-#include "ixgb_osdep.h"
-
-/* Enums */
-typedef enum {
- ixgb_mac_unknown = 0,
- ixgb_82597,
- ixgb_num_macs
-} ixgb_mac_type;
-
-/* Types of physical layer modules */
-typedef enum {
- ixgb_phy_type_unknown = 0,
- ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */
- ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */
- ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */
- ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */
- ixgb_phy_type_bcm /* SUN specific board */
-} ixgb_phy_type;
-
-/* XPAK transceiver vendors, for the SR adapters */
-typedef enum {
- ixgb_xpak_vendor_intel,
- ixgb_xpak_vendor_infineon
-} ixgb_xpak_vendor;
-
-/* Media Types */
-typedef enum {
- ixgb_media_type_unknown = 0,
- ixgb_media_type_fiber = 1,
- ixgb_media_type_copper = 2,
- ixgb_num_media_types
-} ixgb_media_type;
-
-/* Flow Control Settings */
-typedef enum {
- ixgb_fc_none = 0,
- ixgb_fc_rx_pause = 1,
- ixgb_fc_tx_pause = 2,
- ixgb_fc_full = 3,
- ixgb_fc_default = 0xFF
-} ixgb_fc_type;
-
-/* PCI bus types */
-typedef enum {
- ixgb_bus_type_unknown = 0,
- ixgb_bus_type_pci,
- ixgb_bus_type_pcix
-} ixgb_bus_type;
-
-/* PCI bus speeds */
-typedef enum {
- ixgb_bus_speed_unknown = 0,
- ixgb_bus_speed_33,
- ixgb_bus_speed_66,
- ixgb_bus_speed_100,
- ixgb_bus_speed_133,
- ixgb_bus_speed_reserved
-} ixgb_bus_speed;
-
-/* PCI bus widths */
-typedef enum {
- ixgb_bus_width_unknown = 0,
- ixgb_bus_width_32,
- ixgb_bus_width_64
-} ixgb_bus_width;
-
-#define IXGB_EEPROM_SIZE 64 /* Size in words */
-
-#define SPEED_10000 10000
-#define FULL_DUPLEX 2
-
-#define MIN_NUMBER_OF_DESCRIPTORS 8
-#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */
-
-#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */
-#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */
-#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */
-
-#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */
- /* NOTE: this is MICROSECONDS */
-#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */
-
-/* General Registers */
-#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */
-#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */
-#define IXGB_STATUS 0x00010 /* Device Status Register - RO */
-#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */
-#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */
-
-/* Interrupt */
-#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */
-#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */
-#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */
-#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */
-
-/* Receive */
-#define IXGB_RCTL 0x00100 /* RX Control - RW */
-#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */
-#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */
-#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */
-#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */
-#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */
-#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */
-#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */
-#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */
-#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */
-#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */
-#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */
-#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */
-#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */
-#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */
-#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */
-#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */
-#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* Transmit */
-#define IXGB_TCTL 0x00600 /* TX Control - RW */
-#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */
-#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */
-#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */
-#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */
-#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */
-#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */
-#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */
-#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */
-#define IXGB_PAP 0x00640 /* Pause and Pace - RW */
-#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8
-
-/* Physical */
-#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */
-#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */
-#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */
-#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */
-#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */
-#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */
-#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */
-#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */
-#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */
-#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */
-#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */
-#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */
-#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */
-
-/* Wake-up */
-#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */
-#define IXGB_WUS 0x00810 /* Wake Up Status - RO */
-#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */
-#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */
-#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */
-
-/* Statistics */
-#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */
-#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */
-#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */
-#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */
-#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */
-#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */
-#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */
-#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */
-#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */
-#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */
-#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */
-#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */
-#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */
-#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */
-#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */
-#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */
-#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */
-#define IXGB_TORH 0x02044 /* Total Octets Received (High) */
-#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */
-#define IXGB_RUC 0x02050 /* Receive Undersize Count */
-#define IXGB_ROC 0x02058 /* Receive Oversize Count */
-#define IXGB_RLEC 0x02060 /* Receive Length Error Count */
-#define IXGB_CRCERRS 0x02068 /* CRC Error Count */
-#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */
-#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */
-#define IXGB_MPC 0x02080 /* Missed Packets Count */
-#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */
-#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */
-#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */
-#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */
-#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */
-#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */
-#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */
-#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */
-#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */
-#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */
-#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */
-#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */
-#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */
-#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */
-#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */
-#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */
-#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */
-#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */
-#define IXGB_DC 0x02148 /* Defer Count */
-#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */
-#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */
-#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */
-#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */
-#define IXGB_RFC 0x02188 /* Remote Fault Count */
-#define IXGB_LFC 0x02190 /* Local Fault Count */
-#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */
-#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */
-#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */
-#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */
-#define IXGB_XONRXC 0x021B8 /* XON Received Count */
-#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */
-#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */
-#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */
-#define IXGB_RJC 0x021D8 /* Receive Jabber Count */
-
-/* CTRL0 Bit Masks */
-#define IXGB_CTRL0_LRST 0x00000008
-#define IXGB_CTRL0_JFE 0x00000010
-#define IXGB_CTRL0_XLE 0x00000020
-#define IXGB_CTRL0_MDCS 0x00000040
-#define IXGB_CTRL0_CMDC 0x00000080
-#define IXGB_CTRL0_SDP0 0x00040000
-#define IXGB_CTRL0_SDP1 0x00080000
-#define IXGB_CTRL0_SDP2 0x00100000
-#define IXGB_CTRL0_SDP3 0x00200000
-#define IXGB_CTRL0_SDP0_DIR 0x00400000
-#define IXGB_CTRL0_SDP1_DIR 0x00800000
-#define IXGB_CTRL0_SDP2_DIR 0x01000000
-#define IXGB_CTRL0_SDP3_DIR 0x02000000
-#define IXGB_CTRL0_RST 0x04000000
-#define IXGB_CTRL0_RPE 0x08000000
-#define IXGB_CTRL0_TPE 0x10000000
-#define IXGB_CTRL0_VME 0x40000000
-
-/* CTRL1 Bit Masks */
-#define IXGB_CTRL1_GPI0_EN 0x00000001
-#define IXGB_CTRL1_GPI1_EN 0x00000002
-#define IXGB_CTRL1_GPI2_EN 0x00000004
-#define IXGB_CTRL1_GPI3_EN 0x00000008
-#define IXGB_CTRL1_SDP4 0x00000010
-#define IXGB_CTRL1_SDP5 0x00000020
-#define IXGB_CTRL1_SDP6 0x00000040
-#define IXGB_CTRL1_SDP7 0x00000080
-#define IXGB_CTRL1_SDP4_DIR 0x00000100
-#define IXGB_CTRL1_SDP5_DIR 0x00000200
-#define IXGB_CTRL1_SDP6_DIR 0x00000400
-#define IXGB_CTRL1_SDP7_DIR 0x00000800
-#define IXGB_CTRL1_EE_RST 0x00002000
-#define IXGB_CTRL1_RO_DIS 0x00020000
-#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000
-#define IXGB_CTRL1_PCIXHM_1_2 0x00000000
-#define IXGB_CTRL1_PCIXHM_5_8 0x00400000
-#define IXGB_CTRL1_PCIXHM_3_4 0x00800000
-#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000
-
-/* STATUS Bit Masks */
-#define IXGB_STATUS_LU 0x00000002
-#define IXGB_STATUS_AIP 0x00000004
-#define IXGB_STATUS_TXOFF 0x00000010
-#define IXGB_STATUS_XAUIME 0x00000020
-#define IXGB_STATUS_RES 0x00000040
-#define IXGB_STATUS_RIS 0x00000080
-#define IXGB_STATUS_RIE 0x00000100
-#define IXGB_STATUS_RLF 0x00000200
-#define IXGB_STATUS_RRF 0x00000400
-#define IXGB_STATUS_PCI_SPD 0x00000800
-#define IXGB_STATUS_BUS64 0x00001000
-#define IXGB_STATUS_PCIX_MODE 0x00002000
-#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000
-#define IXGB_STATUS_PCIX_SPD_66 0x00000000
-#define IXGB_STATUS_PCIX_SPD_100 0x00004000
-#define IXGB_STATUS_PCIX_SPD_133 0x00008000
-#define IXGB_STATUS_REV_ID_MASK 0x000F0000
-#define IXGB_STATUS_REV_ID_SHIFT 16
-
-/* EECD Bit Masks */
-#define IXGB_EECD_SK 0x00000001
-#define IXGB_EECD_CS 0x00000002
-#define IXGB_EECD_DI 0x00000004
-#define IXGB_EECD_DO 0x00000008
-#define IXGB_EECD_FWE_MASK 0x00000030
-#define IXGB_EECD_FWE_DIS 0x00000010
-#define IXGB_EECD_FWE_EN 0x00000020
-
-/* MFS */
-#define IXGB_MFS_SHIFT 16
-
-/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */
-#define IXGB_INT_TXDW 0x00000001
-#define IXGB_INT_TXQE 0x00000002
-#define IXGB_INT_LSC 0x00000004
-#define IXGB_INT_RXSEQ 0x00000008
-#define IXGB_INT_RXDMT0 0x00000010
-#define IXGB_INT_RXO 0x00000040
-#define IXGB_INT_RXT0 0x00000080
-#define IXGB_INT_AUTOSCAN 0x00000200
-#define IXGB_INT_GPI0 0x00000800
-#define IXGB_INT_GPI1 0x00001000
-#define IXGB_INT_GPI2 0x00002000
-#define IXGB_INT_GPI3 0x00004000
-
-/* RCTL Bit Masks */
-#define IXGB_RCTL_RXEN 0x00000002
-#define IXGB_RCTL_SBP 0x00000004
-#define IXGB_RCTL_UPE 0x00000008
-#define IXGB_RCTL_MPE 0x00000010
-#define IXGB_RCTL_RDMTS_MASK 0x00000300
-#define IXGB_RCTL_RDMTS_1_2 0x00000000
-#define IXGB_RCTL_RDMTS_1_4 0x00000100
-#define IXGB_RCTL_RDMTS_1_8 0x00000200
-#define IXGB_RCTL_MO_MASK 0x00003000
-#define IXGB_RCTL_MO_47_36 0x00000000
-#define IXGB_RCTL_MO_46_35 0x00001000
-#define IXGB_RCTL_MO_45_34 0x00002000
-#define IXGB_RCTL_MO_43_32 0x00003000
-#define IXGB_RCTL_MO_SHIFT 12
-#define IXGB_RCTL_BAM 0x00008000
-#define IXGB_RCTL_BSIZE_MASK 0x00030000
-#define IXGB_RCTL_BSIZE_2048 0x00000000
-#define IXGB_RCTL_BSIZE_4096 0x00010000
-#define IXGB_RCTL_BSIZE_8192 0x00020000
-#define IXGB_RCTL_BSIZE_16384 0x00030000
-#define IXGB_RCTL_VFE 0x00040000
-#define IXGB_RCTL_CFIEN 0x00080000
-#define IXGB_RCTL_CFI 0x00100000
-#define IXGB_RCTL_RPDA_MASK 0x00600000
-#define IXGB_RCTL_RPDA_MC_MAC 0x00000000
-#define IXGB_RCTL_MC_ONLY 0x00400000
-#define IXGB_RCTL_CFF 0x00800000
-#define IXGB_RCTL_SECRC 0x04000000
-#define IXGB_RDT_FPDB 0x80000000
-
-#define IXGB_RCTL_IDLE_RX_UNIT 0
-
-/* FCRTL Bit Masks */
-#define IXGB_FCRTL_XONE 0x80000000
-
-/* RXDCTL Bit Masks */
-#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF
-#define IXGB_RXDCTL_PTHRESH_SHIFT 0
-#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00
-#define IXGB_RXDCTL_HTHRESH_SHIFT 9
-#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000
-#define IXGB_RXDCTL_WTHRESH_SHIFT 18
-
-/* RAIDC Bit Masks */
-#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F
-#define IXGB_RAIDC_DELAY_MASK 0x000FF800
-#define IXGB_RAIDC_DELAY_SHIFT 11
-#define IXGB_RAIDC_POLL_MASK 0x1FF00000
-#define IXGB_RAIDC_POLL_SHIFT 20
-#define IXGB_RAIDC_RXT_GATE 0x40000000
-#define IXGB_RAIDC_EN 0x80000000
-
-#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220
-#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244
-#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122
-#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61
-
-/* RXCSUM Bit Masks */
-#define IXGB_RXCSUM_IPOFL 0x00000100
-#define IXGB_RXCSUM_TUOFL 0x00000200
-
-/* RAH Bit Masks */
-#define IXGB_RAH_ASEL_MASK 0x00030000
-#define IXGB_RAH_ASEL_DEST 0x00000000
-#define IXGB_RAH_ASEL_SRC 0x00010000
-#define IXGB_RAH_AV 0x80000000
-
-/* TCTL Bit Masks */
-#define IXGB_TCTL_TCE 0x00000001
-#define IXGB_TCTL_TXEN 0x00000002
-#define IXGB_TCTL_TPDE 0x00000004
-
-#define IXGB_TCTL_IDLE_TX_UNIT 0
-
-/* TXDCTL Bit Masks */
-#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F
-#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00
-#define IXGB_TXDCTL_HTHRESH_SHIFT 8
-#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000
-#define IXGB_TXDCTL_WTHRESH_SHIFT 16
-
-/* TSPMT Bit Masks */
-#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF
-#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000
-#define IXGB_TSPMT_TSPBP_SHIFT 16
-
-/* PAP Bit Masks */
-#define IXGB_PAP_TXPC_MASK 0x0000FFFF
-#define IXGB_PAP_TXPV_MASK 0x000F0000
-#define IXGB_PAP_TXPV_10G 0x00000000
-#define IXGB_PAP_TXPV_1G 0x00010000
-#define IXGB_PAP_TXPV_2G 0x00020000
-#define IXGB_PAP_TXPV_3G 0x00030000
-#define IXGB_PAP_TXPV_4G 0x00040000
-#define IXGB_PAP_TXPV_5G 0x00050000
-#define IXGB_PAP_TXPV_6G 0x00060000
-#define IXGB_PAP_TXPV_7G 0x00070000
-#define IXGB_PAP_TXPV_8G 0x00080000
-#define IXGB_PAP_TXPV_9G 0x00090000
-#define IXGB_PAP_TXPV_WAN 0x000F0000
-
-/* PCSC1 Bit Masks */
-#define IXGB_PCSC1_LOOPBACK 0x00004000
-
-/* PCSC2 Bit Masks */
-#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003
-#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001
-
-/* PCSS1 Bit Masks */
-#define IXGB_PCSS1_LOCAL_FAULT 0x00000080
-#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004
-
-/* PCSS2 Bit Masks */
-#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000
-#define IXGB_PCSS2_DEV_PRES 0x00004000
-#define IXGB_PCSS2_TX_LF 0x00000800
-#define IXGB_PCSS2_RX_LF 0x00000400
-#define IXGB_PCSS2_10GBW 0x00000004
-#define IXGB_PCSS2_10GBX 0x00000002
-#define IXGB_PCSS2_10GBR 0x00000001
-
-/* XPCSS Bit Masks */
-#define IXGB_XPCSS_ALIGN_STATUS 0x00001000
-#define IXGB_XPCSS_PATTERN_TEST 0x00000800
-#define IXGB_XPCSS_LANE_3_SYNC 0x00000008
-#define IXGB_XPCSS_LANE_2_SYNC 0x00000004
-#define IXGB_XPCSS_LANE_1_SYNC 0x00000002
-#define IXGB_XPCSS_LANE_0_SYNC 0x00000001
-
-/* XPCSTC Bit Masks */
-#define IXGB_XPCSTC_BERT_TRIG 0x00200000
-#define IXGB_XPCSTC_BERT_SST 0x00100000
-#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000
-#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17
-#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003
-#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001
-#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000
-
-/* MSCA bit Masks */
-/* New Protocol Address */
-#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF
-#define IXGB_MSCA_NP_ADDR_SHIFT 0
-/* Either Device Type or Register Address,depending on ST_CODE */
-#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000
-#define IXGB_MSCA_DEV_TYPE_SHIFT 16
-#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000
-#define IXGB_MSCA_PHY_ADDR_SHIFT 21
-#define IXGB_MSCA_OP_CODE_MASK 0x0C000000
-/* OP_CODE == 00, Address cycle, New Protocol */
-/* OP_CODE == 01, Write operation */
-/* OP_CODE == 10, Read operation */
-/* OP_CODE == 11, Read, auto increment, New Protocol */
-#define IXGB_MSCA_ADDR_CYCLE 0x00000000
-#define IXGB_MSCA_WRITE 0x04000000
-#define IXGB_MSCA_READ 0x08000000
-#define IXGB_MSCA_READ_AUTOINC 0x0C000000
-#define IXGB_MSCA_OP_CODE_SHIFT 26
-#define IXGB_MSCA_ST_CODE_MASK 0x30000000
-/* ST_CODE == 00, New Protocol */
-/* ST_CODE == 01, Old Protocol */
-#define IXGB_MSCA_NEW_PROTOCOL 0x00000000
-#define IXGB_MSCA_OLD_PROTOCOL 0x10000000
-#define IXGB_MSCA_ST_CODE_SHIFT 28
-/* Initiate command, self-clearing when command completes */
-#define IXGB_MSCA_MDI_COMMAND 0x40000000
-/*MDI In Progress Enable. */
-#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000
-
-/* MSRWD bit masks */
-#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF
-#define IXGB_MSRWD_WRITE_DATA_SHIFT 0
-#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000
-#define IXGB_MSRWD_READ_DATA_SHIFT 16
-
-/* Definitions for the optics devices on the MDIO bus. */
-#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */
-
-#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */
-
-/* Vendor-specific MDIO registers */
-#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */
-#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */
-
-#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80
-#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00
-#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */
-
-/* Layout of a single receive descriptor. The controller assumes that this
- * structure is packed into 16 bytes, which is a safe assumption with most
- * compilers. However, some compilers may insert padding between the fields,
- * in which case the structure must be packed in some compiler-specific
- * manner. */
-struct ixgb_rx_desc {
- __le64 buff_addr;
- __le16 length;
- __le16 reserved;
- u8 status;
- u8 errors;
- __le16 special;
-};
-
-#define IXGB_RX_DESC_STATUS_DD 0x01
-#define IXGB_RX_DESC_STATUS_EOP 0x02
-#define IXGB_RX_DESC_STATUS_IXSM 0x04
-#define IXGB_RX_DESC_STATUS_VP 0x08
-#define IXGB_RX_DESC_STATUS_TCPCS 0x20
-#define IXGB_RX_DESC_STATUS_IPCS 0x40
-#define IXGB_RX_DESC_STATUS_PIF 0x80
-
-#define IXGB_RX_DESC_ERRORS_CE 0x01
-#define IXGB_RX_DESC_ERRORS_SE 0x02
-#define IXGB_RX_DESC_ERRORS_P 0x08
-#define IXGB_RX_DESC_ERRORS_TCPE 0x20
-#define IXGB_RX_DESC_ERRORS_IPE 0x40
-#define IXGB_RX_DESC_ERRORS_RXE 0x80
-
-#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
-
-/* Layout of a single transmit descriptor. The controller assumes that this
- * structure is packed into 16 bytes, which is a safe assumption with most
- * compilers. However, some compilers may insert padding between the fields,
- * in which case the structure must be packed in some compiler-specific
- * manner. */
-struct ixgb_tx_desc {
- __le64 buff_addr;
- __le32 cmd_type_len;
- u8 status;
- u8 popts;
- __le16 vlan;
-};
-
-#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF
-#define IXGB_TX_DESC_TYPE_MASK 0x00F00000
-#define IXGB_TX_DESC_TYPE_SHIFT 20
-#define IXGB_TX_DESC_CMD_MASK 0xFF000000
-#define IXGB_TX_DESC_CMD_SHIFT 24
-#define IXGB_TX_DESC_CMD_EOP 0x01000000
-#define IXGB_TX_DESC_CMD_TSE 0x04000000
-#define IXGB_TX_DESC_CMD_RS 0x08000000
-#define IXGB_TX_DESC_CMD_VLE 0x40000000
-#define IXGB_TX_DESC_CMD_IDE 0x80000000
-
-#define IXGB_TX_DESC_TYPE 0x00100000
-
-#define IXGB_TX_DESC_STATUS_DD 0x01
-
-#define IXGB_TX_DESC_POPTS_IXSM 0x01
-#define IXGB_TX_DESC_POPTS_TXSM 0x02
-#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */
-
-struct ixgb_context_desc {
- u8 ipcss;
- u8 ipcso;
- __le16 ipcse;
- u8 tucss;
- u8 tucso;
- __le16 tucse;
- __le32 cmd_type_len;
- u8 status;
- u8 hdr_len;
- __le16 mss;
-};
-
-#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000
-#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000
-#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000
-#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000
-#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000
-
-#define IXGB_CONTEXT_DESC_TYPE 0x00000000
-
-#define IXGB_CONTEXT_DESC_STATUS_DD 0x01
-
-/* Filters */
-#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
-#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */
-
-#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0
-#define ENET_HEADER_SIZE 14
-#define ENET_FCS_LENGTH 4
-#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128
-#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60
-#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514
-#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* Phy Addresses */
-#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */
-#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */
-#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */
-
-/* This structure takes a 64k flash and maps it for identification commands */
-struct ixgb_flash_buffer {
- u8 manufacturer_id;
- u8 device_id;
- u8 filler1[0x2AA8];
- u8 cmd2;
- u8 filler2[0x2AAA];
- u8 cmd1;
- u8 filler3[0xAAAA];
-};
-
-/* Flow control parameters */
-struct ixgb_fc {
- u32 high_water; /* Flow Control High-water */
- u32 low_water; /* Flow Control Low-water */
- u16 pause_time; /* Flow Control Pause timer */
- bool send_xon; /* Flow control send XON */
- ixgb_fc_type type; /* Type of flow control */
-};
-
-/* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
-#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
-#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
-
-/* Phy definitions */
-#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF
-#define IXGB_MAX_PHY_ADDRESS 31
-#define IXGB_MAX_PHY_DEV_TYPE 31
-
-/* Bus parameters */
-struct ixgb_bus {
- ixgb_bus_speed speed;
- ixgb_bus_width width;
- ixgb_bus_type type;
-};
-
-struct ixgb_hw {
- u8 __iomem *hw_addr;/* Base Address of the hardware */
- void *back; /* Pointer to OS-dependent struct */
- struct ixgb_fc fc; /* Flow control parameters */
- struct ixgb_bus bus; /* Bus parameters */
- u32 phy_id; /* Phy Identifier */
- u32 phy_addr; /* XGMII address of Phy */
- ixgb_mac_type mac_type; /* Identifier for MAC controller */
- ixgb_phy_type phy_type; /* Transceiver/phy identifier */
- u32 max_frame_size; /* Maximum frame size supported */
- u32 mc_filter_type; /* Multicast filter hash type */
- u32 num_mc_addrs; /* Number of current Multicast addrs */
- u8 curr_mac_addr[ETH_ALEN]; /* Individual address currently programmed in MAC */
- u32 num_tx_desc; /* Number of Transmit descriptors */
- u32 num_rx_desc; /* Number of Receive descriptors */
- u32 rx_buffer_size; /* Size of Receive buffer */
- bool link_up; /* true if link is valid */
- bool adapter_stopped; /* State of adapter */
- u16 device_id; /* device id from PCI configuration space */
- u16 vendor_id; /* vendor id from PCI configuration space */
- u8 revision_id; /* revision id from PCI configuration space */
- u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
- u16 subsystem_id; /* subsystem id from PCI configuration space */
- u32 bar0; /* Base Address registers */
- u32 bar1;
- u32 bar2;
- u32 bar3;
- u16 pci_cmd_word; /* PCI command register id from PCI configuration space */
- __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */
- unsigned long io_base; /* Our I/O mapped location */
- u32 lastLFC;
- u32 lastRFC;
-};
-
-/* Statistics reported by the hardware */
-struct ixgb_hw_stats {
- u64 tprl;
- u64 tprh;
- u64 gprcl;
- u64 gprch;
- u64 bprcl;
- u64 bprch;
- u64 mprcl;
- u64 mprch;
- u64 uprcl;
- u64 uprch;
- u64 vprcl;
- u64 vprch;
- u64 jprcl;
- u64 jprch;
- u64 gorcl;
- u64 gorch;
- u64 torl;
- u64 torh;
- u64 rnbc;
- u64 ruc;
- u64 roc;
- u64 rlec;
- u64 crcerrs;
- u64 icbc;
- u64 ecbc;
- u64 mpc;
- u64 tptl;
- u64 tpth;
- u64 gptcl;
- u64 gptch;
- u64 bptcl;
- u64 bptch;
- u64 mptcl;
- u64 mptch;
- u64 uptcl;
- u64 uptch;
- u64 vptcl;
- u64 vptch;
- u64 jptcl;
- u64 jptch;
- u64 gotcl;
- u64 gotch;
- u64 totl;
- u64 toth;
- u64 dc;
- u64 plt64c;
- u64 tsctc;
- u64 tsctfc;
- u64 ibic;
- u64 rfc;
- u64 lfc;
- u64 pfrc;
- u64 pftc;
- u64 mcfrc;
- u64 mcftc;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 rjc;
-};
-
-/* Function Prototypes */
-bool ixgb_adapter_stop(struct ixgb_hw *hw);
-bool ixgb_init_hw(struct ixgb_hw *hw);
-bool ixgb_adapter_start(struct ixgb_hw *hw);
-void ixgb_check_for_link(struct ixgb_hw *hw);
-bool ixgb_check_for_bad_link(struct ixgb_hw *hw);
-
-void ixgb_rar_set(struct ixgb_hw *hw, const u8 *addr, u32 index);
-
-/* Filters (multicast, vlan, receive) */
-void ixgb_mc_addr_list_update(struct ixgb_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, u32 pad);
-
-/* Vfta functions */
-void ixgb_write_vfta(struct ixgb_hw *hw, u32 offset, u32 value);
-
-/* Access functions to eeprom data */
-void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr);
-u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw);
-u16 ixgb_get_ee_device_id(struct ixgb_hw *hw);
-bool ixgb_get_eeprom_data(struct ixgb_hw *hw);
-__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index);
-
-/* Everything else */
-void ixgb_led_on(struct ixgb_hw *hw);
-void ixgb_led_off(struct ixgb_hw *hw);
-void ixgb_write_pci_cfg(struct ixgb_hw *hw,
- u32 reg,
- u16 * value);
-
-
-#endif /* _IXGB_HW_H_ */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_ids.h b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
deleted file mode 100644
index 9695b8215f01..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#ifndef _IXGB_IDS_H_
-#define _IXGB_IDS_H_
-
-/**********************************************************************
-** The Device and Vendor IDs for 10 Gigabit MACs
-**********************************************************************/
-
-#define IXGB_DEVICE_ID_82597EX 0x1048
-#define IXGB_DEVICE_ID_82597EX_SR 0x1A48
-#define IXGB_DEVICE_ID_82597EX_LR 0x1B48
-#define IXGB_SUBDEVICE_ID_A11F 0xA11F
-#define IXGB_SUBDEVICE_ID_A01F 0xA01F
-
-#define IXGB_DEVICE_ID_82597EX_CX4 0x109E
-#define IXGB_SUBDEVICE_ID_A00C 0xA00C
-#define IXGB_SUBDEVICE_ID_A01C 0xA01C
-#define IXGB_SUBDEVICE_ID_7036 0x7036
-
-#endif /* #ifndef _IXGB_IDS_H_ */
-/* End of File */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
deleted file mode 100644
index b4d47e7a76c8..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ /dev/null
@@ -1,2285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/prefetch.h>
-#include "ixgb.h"
-
-char ixgb_driver_name[] = "ixgb";
-static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
-
-static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation.";
-
-#define IXGB_CB_LENGTH 256
-static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH;
-module_param(copybreak, uint, 0644);
-MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
-
-/* ixgb_pci_tbl - PCI Device ID Table
- *
- * Wildcard entries (PCI_ANY_ID) should come last
- * Last entry must be all 0s
- *
- * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
- * Class, Class Mask, private data (not used) }
- */
-static const struct pci_device_id ixgb_pci_tbl[] = {
- {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_CX4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_SR,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, IXGB_DEVICE_ID_82597EX_LR,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-
- /* required last entry */
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl);
-
-/* Local Function Prototypes */
-static int ixgb_init_module(void);
-static void ixgb_exit_module(void);
-static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void ixgb_remove(struct pci_dev *pdev);
-static int ixgb_sw_init(struct ixgb_adapter *adapter);
-static int ixgb_open(struct net_device *netdev);
-static int ixgb_close(struct net_device *netdev);
-static void ixgb_configure_tx(struct ixgb_adapter *adapter);
-static void ixgb_configure_rx(struct ixgb_adapter *adapter);
-static void ixgb_setup_rctl(struct ixgb_adapter *adapter);
-static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter);
-static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter);
-static void ixgb_set_multi(struct net_device *netdev);
-static void ixgb_watchdog(struct timer_list *t);
-static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev);
-static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
-static int ixgb_set_mac(struct net_device *netdev, void *p);
-static irqreturn_t ixgb_intr(int irq, void *data);
-static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
-
-static int ixgb_clean(struct napi_struct *, int);
-static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int);
-static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
-
-static void ixgb_tx_timeout(struct net_device *dev, unsigned int txqueue);
-static void ixgb_tx_timeout_task(struct work_struct *work);
-
-static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter);
-static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter);
-static int ixgb_vlan_rx_add_vid(struct net_device *netdev,
- __be16 proto, u16 vid);
-static int ixgb_vlan_rx_kill_vid(struct net_device *netdev,
- __be16 proto, u16 vid);
-static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
-
-static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
- pci_channel_state_t state);
-static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
-static void ixgb_io_resume (struct pci_dev *pdev);
-
-static const struct pci_error_handlers ixgb_err_handler = {
- .error_detected = ixgb_io_error_detected,
- .slot_reset = ixgb_io_slot_reset,
- .resume = ixgb_io_resume,
-};
-
-static struct pci_driver ixgb_driver = {
- .name = ixgb_driver_name,
- .id_table = ixgb_pci_tbl,
- .probe = ixgb_probe,
- .remove = ixgb_remove,
- .err_handler = &ixgb_err_handler
-};
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@...el.com>");
-MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
-MODULE_LICENSE("GPL v2");
-
-#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
-static int debug = -1;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-
-/**
- * ixgb_init_module - Driver Registration Routine
- *
- * ixgb_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-
-static int __init
-ixgb_init_module(void)
-{
- pr_info("%s\n", ixgb_driver_string);
- pr_info("%s\n", ixgb_copyright);
-
- return pci_register_driver(&ixgb_driver);
-}
-
-module_init(ixgb_init_module);
-
-/**
- * ixgb_exit_module - Driver Exit Cleanup Routine
- *
- * ixgb_exit_module is called just before the driver is removed
- * from memory.
- **/
-
-static void __exit
-ixgb_exit_module(void)
-{
- pci_unregister_driver(&ixgb_driver);
-}
-
-module_exit(ixgb_exit_module);
-
-/**
- * ixgb_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-
-static void
-ixgb_irq_disable(struct ixgb_adapter *adapter)
-{
- IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
- IXGB_WRITE_FLUSH(&adapter->hw);
- synchronize_irq(adapter->pdev->irq);
-}
-
-/**
- * ixgb_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-
-static void
-ixgb_irq_enable(struct ixgb_adapter *adapter)
-{
- u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
- IXGB_INT_TXDW | IXGB_INT_LSC;
- if (adapter->hw.subsystem_vendor_id == PCI_VENDOR_ID_SUN)
- val |= IXGB_INT_GPI0;
- IXGB_WRITE_REG(&adapter->hw, IMS, val);
- IXGB_WRITE_FLUSH(&adapter->hw);
-}
-
-int
-ixgb_up(struct ixgb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err, irq_flags = IRQF_SHARED;
- int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- struct ixgb_hw *hw = &adapter->hw;
-
- /* hardware has been reset, we need to reload some things */
-
- ixgb_rar_set(hw, netdev->dev_addr, 0);
- ixgb_set_multi(netdev);
-
- ixgb_restore_vlan(adapter);
-
- ixgb_configure_tx(adapter);
- ixgb_setup_rctl(adapter);
- ixgb_configure_rx(adapter);
- ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring));
-
- /* disable interrupts and get the hardware into a known state */
- IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
-
- /* only enable MSI if bus is in PCI-X mode */
- if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) {
- err = pci_enable_msi(adapter->pdev);
- if (!err) {
- adapter->have_msi = true;
- irq_flags = 0;
- }
- /* proceed to try to request regular interrupt */
- }
-
- err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags,
- netdev->name, netdev);
- if (err) {
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate interrupt Error: %d\n", err);
- return err;
- }
-
- if ((hw->max_frame_size != max_frame) ||
- (hw->max_frame_size !=
- (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) {
-
- hw->max_frame_size = max_frame;
-
- IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
-
- if (hw->max_frame_size >
- IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
- u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
-
- if (!(ctrl0 & IXGB_CTRL0_JFE)) {
- ctrl0 |= IXGB_CTRL0_JFE;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0);
- }
- }
- }
-
- clear_bit(__IXGB_DOWN, &adapter->flags);
-
- napi_enable(&adapter->napi);
- ixgb_irq_enable(adapter);
-
- netif_wake_queue(netdev);
-
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- return 0;
-}
-
-void
-ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
-{
- struct net_device *netdev = adapter->netdev;
-
- /* prevent the interrupt handler from restarting watchdog */
- set_bit(__IXGB_DOWN, &adapter->flags);
-
- netif_carrier_off(netdev);
-
- napi_disable(&adapter->napi);
- /* waiting for NAPI to complete can re-enable interrupts */
- ixgb_irq_disable(adapter);
- free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
-
- if (kill_watchdog)
- del_timer_sync(&adapter->watchdog_timer);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netif_stop_queue(netdev);
-
- ixgb_reset(adapter);
- ixgb_clean_tx_ring(adapter);
- ixgb_clean_rx_ring(adapter);
-}
-
-void
-ixgb_reset(struct ixgb_adapter *adapter)
-{
- struct ixgb_hw *hw = &adapter->hw;
-
- ixgb_adapter_stop(hw);
- if (!ixgb_init_hw(hw))
- netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
-
- /* restore frame size information */
- IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
- if (hw->max_frame_size >
- IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
- u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
- if (!(ctrl0 & IXGB_CTRL0_JFE)) {
- ctrl0 |= IXGB_CTRL0_JFE;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0);
- }
- }
-}
-
-static netdev_features_t
-ixgb_fix_features(struct net_device *netdev, netdev_features_t features)
-{
- /*
- * Tx VLAN insertion does not work per HW design when Rx stripping is
- * disabled.
- */
- if (!(features & NETIF_F_HW_VLAN_CTAG_RX))
- features &= ~NETIF_F_HW_VLAN_CTAG_TX;
-
- return features;
-}
-
-static int
-ixgb_set_features(struct net_device *netdev, netdev_features_t features)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- netdev_features_t changed = features ^ netdev->features;
-
- if (!(changed & (NETIF_F_RXCSUM|NETIF_F_HW_VLAN_CTAG_RX)))
- return 0;
-
- adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
-
- if (netif_running(netdev)) {
- ixgb_down(adapter, true);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
-
- return 0;
-}
-
-
-static const struct net_device_ops ixgb_netdev_ops = {
- .ndo_open = ixgb_open,
- .ndo_stop = ixgb_close,
- .ndo_start_xmit = ixgb_xmit_frame,
- .ndo_set_rx_mode = ixgb_set_multi,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = ixgb_set_mac,
- .ndo_change_mtu = ixgb_change_mtu,
- .ndo_tx_timeout = ixgb_tx_timeout,
- .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid,
- .ndo_fix_features = ixgb_fix_features,
- .ndo_set_features = ixgb_set_features,
-};
-
-/**
- * ixgb_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in ixgb_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * ixgb_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-
-static int
-ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- struct net_device *netdev = NULL;
- struct ixgb_adapter *adapter;
- static int cards_found = 0;
- u8 addr[ETH_ALEN];
- int i;
- int err;
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
-
- err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (err) {
- pr_err("No usable DMA configuration, aborting\n");
- goto err_dma_mask;
- }
-
- err = pci_request_regions(pdev, ixgb_driver_name);
- if (err)
- goto err_request_regions;
-
- pci_set_master(pdev);
-
- netdev = alloc_etherdev(sizeof(struct ixgb_adapter));
- if (!netdev) {
- err = -ENOMEM;
- goto err_alloc_etherdev;
- }
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- adapter->hw.back = adapter;
- adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
-
- adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0);
- if (!adapter->hw.hw_addr) {
- err = -EIO;
- goto err_ioremap;
- }
-
- for (i = BAR_1; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
- adapter->hw.io_base = pci_resource_start(pdev, i);
- break;
- }
- }
-
- netdev->netdev_ops = &ixgb_netdev_ops;
- ixgb_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, ixgb_clean);
-
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- adapter->bd_number = cards_found;
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- /* setup the private structure */
-
- err = ixgb_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- netdev->hw_features = NETIF_F_SG |
- NETIF_F_TSO |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX;
- netdev->features = netdev->hw_features |
- NETIF_F_HW_VLAN_CTAG_FILTER;
- netdev->hw_features |= NETIF_F_RXCSUM;
-
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
-
- /* MTU range: 68 - 16114 */
- netdev->min_mtu = ETH_MIN_MTU;
- netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN;
-
- /* make sure the EEPROM is good */
-
- if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
- netif_err(adapter, probe, adapter->netdev,
- "The EEPROM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- ixgb_get_ee_mac_addr(&adapter->hw, addr);
- eth_hw_addr_set(netdev, addr);
-
- if (!is_valid_ether_addr(netdev->dev_addr)) {
- netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
-
- timer_setup(&adapter->watchdog_timer, ixgb_watchdog, 0);
-
- INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
- netif_info(adapter, probe, adapter->netdev,
- "Intel(R) PRO/10GbE Network Connection\n");
- ixgb_check_options(adapter);
- /* reset the hardware with the new settings */
-
- ixgb_reset(adapter);
-
- cards_found++;
- return 0;
-
-err_register:
-err_sw_init:
-err_eeprom:
- iounmap(adapter->hw.hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_regions(pdev);
-err_request_regions:
-err_dma_mask:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * ixgb_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * ixgb_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-
-static void
-ixgb_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- cancel_work_sync(&adapter->tx_timeout_task);
-
- unregister_netdev(netdev);
-
- iounmap(adapter->hw.hw_addr);
- pci_release_regions(pdev);
-
- free_netdev(netdev);
- pci_disable_device(pdev);
-}
-
-/**
- * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter)
- * @adapter: board private structure to initialize
- *
- * ixgb_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-
-static int
-ixgb_sw_init(struct ixgb_adapter *adapter)
-{
- struct ixgb_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_id = pdev->subsystem_device;
-
- hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
-
- if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
- hw->mac_type = ixgb_82597;
- else {
- /* should never have loaded on this device */
- netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
- }
-
- /* enable flow control to be programmed */
- hw->fc.send_xon = 1;
-
- set_bit(__IXGB_DOWN, &adapter->flags);
- return 0;
-}
-
-/**
- * ixgb_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-
-static int
-ixgb_open(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int err;
-
- /* allocate transmit descriptors */
- err = ixgb_setup_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- netif_carrier_off(netdev);
-
- /* allocate receive descriptors */
-
- err = ixgb_setup_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- err = ixgb_up(adapter);
- if (err)
- goto err_up;
-
- netif_start_queue(netdev);
-
- return 0;
-
-err_up:
- ixgb_free_rx_resources(adapter);
-err_setup_rx:
- ixgb_free_tx_resources(adapter);
-err_setup_tx:
- ixgb_reset(adapter);
-
- return err;
-}
-
-/**
- * ixgb_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-
-static int
-ixgb_close(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- ixgb_down(adapter, true);
-
- ixgb_free_tx_resources(adapter);
- ixgb_free_rx_resources(adapter);
-
- return 0;
-}
-
-/**
- * ixgb_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-
-int
-ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgb_buffer) * txdr->count;
- txdr->buffer_info = vzalloc(size);
- if (!txdr->buffer_info)
- return -ENOMEM;
-
- /* round up to nearest 4K */
-
- txdr->size = txdr->count * sizeof(struct ixgb_tx_desc);
- txdr->size = ALIGN(txdr->size, 4096);
-
- txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
- GFP_KERNEL);
- if (!txdr->desc) {
- vfree(txdr->buffer_info);
- return -ENOMEM;
- }
-
- txdr->next_to_use = 0;
- txdr->next_to_clean = 0;
-
- return 0;
-}
-
-/**
- * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset.
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-
-static void
-ixgb_configure_tx(struct ixgb_adapter *adapter)
-{
- u64 tdba = adapter->tx_ring.dma;
- u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
- u32 tctl;
- struct ixgb_hw *hw = &adapter->hw;
-
- /* Setup the Base and Length of the Tx Descriptor Ring
- * tx_ring.dma can be either a 32 or 64 bit value
- */
-
- IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32));
-
- IXGB_WRITE_REG(hw, TDLEN, tdlen);
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
-
- IXGB_WRITE_REG(hw, TDH, 0);
- IXGB_WRITE_REG(hw, TDT, 0);
-
- /* don't set up txdctl, it induces performance problems if configured
- * incorrectly */
- /* Set the Tx Interrupt Delay register */
-
- IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
-
- /* Program the Transmit Control Register */
-
- tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE;
- IXGB_WRITE_REG(hw, TCTL, tctl);
-
- /* Setup Transmit Descriptor Settings for this adapter */
- adapter->tx_cmd_type =
- IXGB_TX_DESC_TYPE |
- (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0);
-}
-
-/**
- * ixgb_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- *
- * Returns 0 on success, negative on failure
- **/
-
-int
-ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgb_buffer) * rxdr->count;
- rxdr->buffer_info = vzalloc(size);
- if (!rxdr->buffer_info)
- return -ENOMEM;
-
- /* Round up to nearest 4K */
-
- rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc);
- rxdr->size = ALIGN(rxdr->size, 4096);
-
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
- GFP_KERNEL);
-
- if (!rxdr->desc) {
- vfree(rxdr->buffer_info);
- return -ENOMEM;
- }
-
- rxdr->next_to_clean = 0;
- rxdr->next_to_use = 0;
-
- return 0;
-}
-
-/**
- * ixgb_setup_rctl - configure the receive control register
- * @adapter: Board private structure
- **/
-
-static void
-ixgb_setup_rctl(struct ixgb_adapter *adapter)
-{
- u32 rctl;
-
- rctl = IXGB_READ_REG(&adapter->hw, RCTL);
-
- rctl &= ~(3 << IXGB_RCTL_MO_SHIFT);
-
- rctl |=
- IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 |
- IXGB_RCTL_RXEN | IXGB_RCTL_CFF |
- (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT);
-
- rctl |= IXGB_RCTL_SECRC;
-
- if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048)
- rctl |= IXGB_RCTL_BSIZE_2048;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096)
- rctl |= IXGB_RCTL_BSIZE_4096;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192)
- rctl |= IXGB_RCTL_BSIZE_8192;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384)
- rctl |= IXGB_RCTL_BSIZE_16384;
-
- IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
-}
-
-/**
- * ixgb_configure_rx - Configure 82597 Receive Unit after Reset.
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-
-static void
-ixgb_configure_rx(struct ixgb_adapter *adapter)
-{
- u64 rdba = adapter->rx_ring.dma;
- u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
- struct ixgb_hw *hw = &adapter->hw;
- u32 rctl;
- u32 rxcsum;
-
- /* make sure receives are disabled while setting up the descriptors */
-
- rctl = IXGB_READ_REG(hw, RCTL);
- IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN);
-
- /* set the Receive Delay Timer Register */
-
- IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
-
- /* Setup the Base and Length of the Rx Descriptor Ring */
-
- IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32));
-
- IXGB_WRITE_REG(hw, RDLEN, rdlen);
-
- /* Setup the HW Rx Head and Tail Descriptor Pointers */
- IXGB_WRITE_REG(hw, RDH, 0);
- IXGB_WRITE_REG(hw, RDT, 0);
-
- /* due to the hardware errata with RXDCTL, we are unable to use any of
- * the performance enhancing features of it without causing other
- * subtle bugs, some of the bugs could include receive length
- * corruption at high data rates (WTHRESH > 0) and/or receive
- * descriptor ring irregularites (particularly in hardware cache) */
- IXGB_WRITE_REG(hw, RXDCTL, 0);
-
- /* Enable Receive Checksum Offload for TCP and UDP */
- if (adapter->rx_csum) {
- rxcsum = IXGB_READ_REG(hw, RXCSUM);
- rxcsum |= IXGB_RXCSUM_TUOFL;
- IXGB_WRITE_REG(hw, RXCSUM, rxcsum);
- }
-
- /* Enable Receives */
-
- IXGB_WRITE_REG(hw, RCTL, rctl);
-}
-
-/**
- * ixgb_free_tx_resources - Free Tx Resources
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-
-void
-ixgb_free_tx_resources(struct ixgb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- ixgb_clean_tx_ring(adapter);
-
- vfree(adapter->tx_ring.buffer_info);
- adapter->tx_ring.buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, adapter->tx_ring.size,
- adapter->tx_ring.desc, adapter->tx_ring.dma);
-
- adapter->tx_ring.desc = NULL;
-}
-
-static void
-ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter,
- struct ixgb_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
- /* these fields must always be initialized in tx
- * buffer_info->length = 0;
- * buffer_info->next_to_watch = 0; */
-}
-
-/**
- * ixgb_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
- **/
-
-static void
-ixgb_clean_tx_ring(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct ixgb_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- size = sizeof(struct ixgb_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- IXGB_WRITE_REG(&adapter->hw, TDH, 0);
- IXGB_WRITE_REG(&adapter->hw, TDT, 0);
-}
-
-/**
- * ixgb_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-
-void
-ixgb_free_rx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct pci_dev *pdev = adapter->pdev;
-
- ixgb_clean_rx_ring(adapter);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * ixgb_clean_rx_ring - Free Rx Buffers
- * @adapter: board private structure
- **/
-
-static void
-ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct ixgb_buffer *buffer_info;
- struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Rx ring sk_buffs */
-
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- buffer_info->length = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- }
-
- size = sizeof(struct ixgb_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
-
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- IXGB_WRITE_REG(&adapter->hw, RDH, 0);
- IXGB_WRITE_REG(&adapter->hw, RDT, 0);
-}
-
-/**
- * ixgb_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int
-ixgb_set_mac(struct net_device *netdev, void *p)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- eth_hw_addr_set(netdev, addr->sa_data);
-
- ixgb_rar_set(&adapter->hw, addr->sa_data, 0);
-
- return 0;
-}
-
-/**
- * ixgb_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-
-static void
-ixgb_set_multi(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u32 rctl;
-
- /* Check for Promiscuous and All Multicast modes */
-
- rctl = IXGB_READ_REG(hw, RCTL);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE);
- /* disable VLAN filtering */
- rctl &= ~IXGB_RCTL_CFIEN;
- rctl &= ~IXGB_RCTL_VFE;
- } else {
- if (netdev->flags & IFF_ALLMULTI) {
- rctl |= IXGB_RCTL_MPE;
- rctl &= ~IXGB_RCTL_UPE;
- } else {
- rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE);
- }
- /* enable VLAN filtering */
- rctl |= IXGB_RCTL_VFE;
- rctl &= ~IXGB_RCTL_CFIEN;
- }
-
- if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
- rctl |= IXGB_RCTL_MPE;
- IXGB_WRITE_REG(hw, RCTL, rctl);
- } else {
- u8 *mta = kmalloc_array(ETH_ALEN,
- IXGB_MAX_NUM_MULTICAST_ADDRESSES,
- GFP_ATOMIC);
- u8 *addr;
- if (!mta)
- goto alloc_failed;
-
- IXGB_WRITE_REG(hw, RCTL, rctl);
-
- addr = mta;
- netdev_for_each_mc_addr(ha, netdev) {
- memcpy(addr, ha->addr, ETH_ALEN);
- addr += ETH_ALEN;
- }
-
- ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
- kfree(mta);
- }
-
-alloc_failed:
- if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
- ixgb_vlan_strip_enable(adapter);
- else
- ixgb_vlan_strip_disable(adapter);
-
-}
-
-/**
- * ixgb_watchdog - Timer Call-back
- * @t: pointer to timer_list containing our private info pointer
- **/
-
-static void
-ixgb_watchdog(struct timer_list *t)
-{
- struct ixgb_adapter *adapter = from_timer(adapter, t, watchdog_timer);
- struct net_device *netdev = adapter->netdev;
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
-
- ixgb_check_for_link(&adapter->hw);
-
- if (ixgb_check_for_bad_link(&adapter->hw)) {
- /* force the reset path */
- netif_stop_queue(netdev);
- }
-
- if (adapter->hw.link_up) {
- if (!netif_carrier_ok(netdev)) {
- netdev_info(netdev,
- "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n",
- (adapter->hw.fc.type == ixgb_fc_full) ?
- "RX/TX" :
- (adapter->hw.fc.type == ixgb_fc_rx_pause) ?
- "RX" :
- (adapter->hw.fc.type == ixgb_fc_tx_pause) ?
- "TX" : "None");
- adapter->link_speed = 10000;
- adapter->link_duplex = FULL_DUPLEX;
- netif_carrier_on(netdev);
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netdev_info(netdev, "NIC Link is Down\n");
- netif_carrier_off(netdev);
- }
- }
-
- ixgb_update_stats(adapter);
-
- if (!netif_carrier_ok(netdev)) {
- if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
- schedule_work(&adapter->tx_timeout_task);
- /* return immediately since reset is imminent */
- return;
- }
- }
-
- /* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = true;
-
- /* generate an interrupt to force clean up of any stragglers */
- IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW);
-
- /* Reset the timer */
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-}
-
-#define IXGB_TX_FLAGS_CSUM 0x00000001
-#define IXGB_TX_FLAGS_VLAN 0x00000002
-#define IXGB_TX_FLAGS_TSO 0x00000004
-
-static int
-ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
-{
- struct ixgb_context_desc *context_desc;
- unsigned int i;
- u8 ipcss, ipcso, tucss, tucso, hdr_len;
- u16 ipcse, tucse, mss;
-
- if (likely(skb_is_gso(skb))) {
- struct ixgb_buffer *buffer_info;
- struct iphdr *iph;
- int err;
-
- err = skb_cow_head(skb, 0);
- if (err < 0)
- return err;
-
- hdr_len = skb_tcp_all_headers(skb);
- mss = skb_shinfo(skb)->gso_size;
- iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP, 0);
- ipcss = skb_network_offset(skb);
- ipcso = (void *)&(iph->check) - (void *)skb->data;
- ipcse = skb_transport_offset(skb) - 1;
- tucss = skb_transport_offset(skb);
- tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- tucse = 0;
-
- i = adapter->tx_ring.next_to_use;
- context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
- buffer_info = &adapter->tx_ring.buffer_info[i];
- WARN_ON(buffer_info->dma != 0);
-
- context_desc->ipcss = ipcss;
- context_desc->ipcso = ipcso;
- context_desc->ipcse = cpu_to_le16(ipcse);
- context_desc->tucss = tucss;
- context_desc->tucso = tucso;
- context_desc->tucse = cpu_to_le16(tucse);
- context_desc->mss = cpu_to_le16(mss);
- context_desc->hdr_len = hdr_len;
- context_desc->status = 0;
- context_desc->cmd_type_len = cpu_to_le32(
- IXGB_CONTEXT_DESC_TYPE
- | IXGB_CONTEXT_DESC_CMD_TSE
- | IXGB_CONTEXT_DESC_CMD_IP
- | IXGB_CONTEXT_DESC_CMD_TCP
- | IXGB_CONTEXT_DESC_CMD_IDE
- | (skb->len - (hdr_len)));
-
-
- if (++i == adapter->tx_ring.count) i = 0;
- adapter->tx_ring.next_to_use = i;
-
- return 1;
- }
-
- return 0;
-}
-
-static bool
-ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
-{
- struct ixgb_context_desc *context_desc;
- unsigned int i;
- u8 css, cso;
-
- if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
- struct ixgb_buffer *buffer_info;
- css = skb_checksum_start_offset(skb);
- cso = css + skb->csum_offset;
-
- i = adapter->tx_ring.next_to_use;
- context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
- buffer_info = &adapter->tx_ring.buffer_info[i];
- WARN_ON(buffer_info->dma != 0);
-
- context_desc->tucss = css;
- context_desc->tucso = cso;
- context_desc->tucse = 0;
- /* zero out any previously existing data in one instruction */
- *(u32 *)&(context_desc->ipcss) = 0;
- context_desc->status = 0;
- context_desc->hdr_len = 0;
- context_desc->mss = 0;
- context_desc->cmd_type_len =
- cpu_to_le32(IXGB_CONTEXT_DESC_TYPE
- | IXGB_TX_DESC_CMD_IDE);
-
- if (++i == adapter->tx_ring.count) i = 0;
- adapter->tx_ring.next_to_use = i;
-
- return true;
- }
-
- return false;
-}
-
-#define IXGB_MAX_TXD_PWR 14
-#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR)
-
-static int
-ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
- unsigned int first)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_buffer *buffer_info;
- int len = skb_headlen(skb);
- unsigned int offset = 0, size, count = 0, i;
- unsigned int mss = skb_shinfo(skb)->gso_size;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
- unsigned int f;
-
- i = tx_ring->next_to_use;
-
- while (len) {
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_DATA_PER_TXD);
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && !nr_frags && size == len && size > 8))
- size -= 4;
-
- buffer_info->length = size;
- WARN_ON(buffer_info->dma != 0);
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = false;
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = 0;
-
- len -= size;
- offset += size;
- count++;
- if (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- }
-
- for (f = 0; f < nr_frags; f++) {
- const skb_frag_t *frag = &skb_shinfo(skb)->frags[f];
- len = skb_frag_size(frag);
- offset = 0;
-
- while (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_DATA_PER_TXD);
-
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && (f == (nr_frags - 1))
- && size == len && size > 8))
- size -= 4;
-
- buffer_info->length = size;
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = true;
- buffer_info->dma =
- skb_frag_dma_map(&pdev->dev, frag, offset, size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = 0;
-
- len -= size;
- offset += size;
- count++;
- }
- }
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
- buffer_info->dma = 0;
- if (count)
- count--;
-
- while (count--) {
- if (i==0)
- i += tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- return 0;
-}
-
-static void
-ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct ixgb_tx_desc *tx_desc = NULL;
- struct ixgb_buffer *buffer_info;
- u32 cmd_type_len = adapter->tx_cmd_type;
- u8 status = 0;
- u8 popts = 0;
- unsigned int i;
-
- if (tx_flags & IXGB_TX_FLAGS_TSO) {
- cmd_type_len |= IXGB_TX_DESC_CMD_TSE;
- popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM);
- }
-
- if (tx_flags & IXGB_TX_FLAGS_CSUM)
- popts |= IXGB_TX_DESC_POPTS_TXSM;
-
- if (tx_flags & IXGB_TX_FLAGS_VLAN)
- cmd_type_len |= IXGB_TX_DESC_CMD_VLE;
-
- i = tx_ring->next_to_use;
-
- while (count--) {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = IXGB_TX_DESC(*tx_ring, i);
- tx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->cmd_type_len =
- cpu_to_le32(cmd_type_len | buffer_info->length);
- tx_desc->status = status;
- tx_desc->popts = popts;
- tx_desc->vlan = cpu_to_le16(vlan_id);
-
- if (++i == tx_ring->count) i = 0;
- }
-
- tx_desc->cmd_type_len |=
- cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-
- tx_ring->next_to_use = i;
- IXGB_WRITE_REG(&adapter->hw, TDT, i);
-}
-
-static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
-
- netif_stop_queue(netdev);
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (likely(IXGB_DESC_UNUSED(tx_ring) < size))
- return -EBUSY;
-
- /* A reprieve! */
- netif_start_queue(netdev);
- ++adapter->restart_queue;
- return 0;
-}
-
-static int ixgb_maybe_stop_tx(struct net_device *netdev,
- struct ixgb_desc_ring *tx_ring, int size)
-{
- if (likely(IXGB_DESC_UNUSED(tx_ring) >= size))
- return 0;
- return __ixgb_maybe_stop_tx(netdev, size);
-}
-
-
-/* Tx Descriptors needed, worst case */
-#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \
- (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
-#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \
- MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
- + 1 /* one more needed for sentinel TSO workaround */
-
-static netdev_tx_t
-ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- unsigned int first;
- unsigned int tx_flags = 0;
- int vlan_id = 0;
- int count = 0;
- int tso;
-
- if (test_bit(__IXGB_DOWN, &adapter->flags)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->len <= 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
- DESC_NEEDED)))
- return NETDEV_TX_BUSY;
-
- if (skb_vlan_tag_present(skb)) {
- tx_flags |= IXGB_TX_FLAGS_VLAN;
- vlan_id = skb_vlan_tag_get(skb);
- }
-
- first = adapter->tx_ring.next_to_use;
-
- tso = ixgb_tso(adapter, skb);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (likely(tso))
- tx_flags |= IXGB_TX_FLAGS_TSO;
- else if (ixgb_tx_csum(adapter, skb))
- tx_flags |= IXGB_TX_FLAGS_CSUM;
-
- count = ixgb_tx_map(adapter, skb, first);
-
- if (count) {
- ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
- /* Make sure there is space in the ring for the next send. */
- ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
-
- } else {
- dev_kfree_skb_any(skb);
- adapter->tx_ring.buffer_info[first].time_stamp = 0;
- adapter->tx_ring.next_to_use = first;
- }
-
- return NETDEV_TX_OK;
-}
-
-/**
- * ixgb_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- * @txqueue: queue hanging (unused)
- **/
-
-static void
-ixgb_tx_timeout(struct net_device *netdev, unsigned int __always_unused txqueue)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
-}
-
-static void
-ixgb_tx_timeout_task(struct work_struct *work)
-{
- struct ixgb_adapter *adapter =
- container_of(work, struct ixgb_adapter, tx_timeout_task);
-
- adapter->tx_timeout_count++;
- ixgb_down(adapter, true);
- ixgb_up(adapter);
-}
-
-/**
- * ixgb_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int
-ixgb_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
-
- if (netif_running(netdev))
- ixgb_down(adapter, true);
-
- adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */
-
- netdev->mtu = new_mtu;
-
- if (netif_running(netdev))
- ixgb_up(adapter);
-
- return 0;
-}
-
-/**
- * ixgb_update_stats - Update the board statistics counters.
- * @adapter: board private structure
- **/
-
-void
-ixgb_update_stats(struct ixgb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* Prevent stats update while adapter is being reset */
- if (pci_channel_offline(pdev))
- return;
-
- if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
- u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
- u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
- u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
- u64 bcast = ((u64)bcast_h << 32) | bcast_l;
-
- multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
- /* fix up multicast stats by removing broadcasts */
- if (multi >= bcast)
- multi -= bcast;
-
- adapter->stats.mprcl += (multi & 0xFFFFFFFF);
- adapter->stats.mprch += (multi >> 32);
- adapter->stats.bprcl += bcast_l;
- adapter->stats.bprch += bcast_h;
- } else {
- adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
- adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
- adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
- adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
- }
- adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL);
- adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH);
- adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL);
- adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH);
- adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL);
- adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH);
- adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL);
- adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH);
- adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL);
- adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH);
- adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL);
- adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH);
- adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL);
- adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH);
- adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC);
- adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC);
- adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC);
- adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC);
- adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS);
- adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC);
- adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC);
- adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC);
- adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL);
- adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH);
- adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL);
- adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH);
- adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL);
- adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH);
- adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL);
- adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH);
- adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL);
- adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH);
- adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL);
- adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH);
- adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL);
- adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH);
- adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL);
- adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH);
- adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL);
- adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH);
- adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC);
- adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C);
- adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC);
- adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC);
- adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC);
- adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC);
- adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC);
- adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC);
- adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC);
- adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC);
- adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC);
- adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC);
- adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC);
- adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC);
- adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC);
- adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC);
-
- /* Fill out the OS statistics structure */
-
- netdev->stats.rx_packets = adapter->stats.gprcl;
- netdev->stats.tx_packets = adapter->stats.gptcl;
- netdev->stats.rx_bytes = adapter->stats.gorcl;
- netdev->stats.tx_bytes = adapter->stats.gotcl;
- netdev->stats.multicast = adapter->stats.mprcl;
- netdev->stats.collisions = 0;
-
- /* ignore RLEC as it reports errors for padded (<64bytes) frames
- * with a length in the type/len field */
- netdev->stats.rx_errors =
- /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
- adapter->stats.ruc +
- adapter->stats.roc /*+ adapter->stats.rlec */ +
- adapter->stats.icbc +
- adapter->stats.ecbc + adapter->stats.mpc;
-
- /* see above
- * netdev->stats.rx_length_errors = adapter->stats.rlec;
- */
-
- netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
- netdev->stats.rx_fifo_errors = adapter->stats.mpc;
- netdev->stats.rx_missed_errors = adapter->stats.mpc;
- netdev->stats.rx_over_errors = adapter->stats.mpc;
-
- netdev->stats.tx_errors = 0;
- netdev->stats.rx_frame_errors = 0;
- netdev->stats.tx_aborted_errors = 0;
- netdev->stats.tx_carrier_errors = 0;
- netdev->stats.tx_fifo_errors = 0;
- netdev->stats.tx_heartbeat_errors = 0;
- netdev->stats.tx_window_errors = 0;
-}
-
-/**
- * ixgb_intr - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-
-static irqreturn_t
-ixgb_intr(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u32 icr = IXGB_READ_REG(hw, ICR);
-
- if (unlikely(!icr))
- return IRQ_NONE; /* Not our interrupt */
-
- if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)))
- if (!test_bit(__IXGB_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- if (napi_schedule_prep(&adapter->napi)) {
-
- /* Disable interrupts and register for poll. The flush
- of the posted write is intentionally left out.
- */
-
- IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
- __napi_schedule(&adapter->napi);
- }
- return IRQ_HANDLED;
-}
-
-/**
- * ixgb_clean - NAPI Rx polling callback
- * @napi: napi struct pointer
- * @budget: max number of receives to clean
- **/
-
-static int
-ixgb_clean(struct napi_struct *napi, int budget)
-{
- struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi);
- int work_done = 0;
-
- ixgb_clean_tx_irq(adapter);
- ixgb_clean_rx_irq(adapter, &work_done, budget);
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- napi_complete_done(napi, work_done);
- if (!test_bit(__IXGB_DOWN, &adapter->flags))
- ixgb_irq_enable(adapter);
- }
-
- return work_done;
-}
-
-/**
- * ixgb_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- **/
-
-static bool
-ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct net_device *netdev = adapter->netdev;
- struct ixgb_tx_desc *tx_desc, *eop_desc;
- struct ixgb_buffer *buffer_info;
- unsigned int i, eop;
- bool cleaned = false;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IXGB_TX_DESC(*tx_ring, eop);
-
- while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
-
- rmb(); /* read buffer_info after eop_desc */
- for (cleaned = false; !cleaned; ) {
- tx_desc = IXGB_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
-
- if (tx_desc->popts &
- (IXGB_TX_DESC_POPTS_TXSM |
- IXGB_TX_DESC_POPTS_IXSM))
- adapter->hw_csum_tx_good++;
-
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
-
- *(u32 *)&(tx_desc->status) = 0;
-
- cleaned = (i == eop);
- if (++i == tx_ring->count) i = 0;
- }
-
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IXGB_TX_DESC(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
- if (unlikely(cleaned && netif_carrier_ok(netdev) &&
- IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean. */
- smp_mb();
-
- if (netif_queue_stopped(netdev) &&
- !(test_bit(__IXGB_DOWN, &adapter->flags))) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
- }
-
- if (adapter->detect_tx_hung) {
- /* detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
- adapter->detect_tx_hung = false;
- if (tx_ring->buffer_info[eop].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
- && !(IXGB_READ_REG(&adapter->hw, STATUS) &
- IXGB_STATUS_TXOFF)) {
- /* detected Tx unit hang */
- netif_err(adapter, drv, adapter->netdev,
- "Detected Tx Unit Hang\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- IXGB_READ_REG(&adapter->hw, TDH),
- IXGB_READ_REG(&adapter->hw, TDT),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->status);
- netif_stop_queue(netdev);
- }
- }
-
- return cleaned;
-}
-
-/**
- * ixgb_rx_checksum - Receive Checksum Offload for 82597.
- * @adapter: board private structure
- * @rx_desc: receive descriptor
- * @skb: socket buffer with received data
- **/
-
-static void
-ixgb_rx_checksum(struct ixgb_adapter *adapter,
- struct ixgb_rx_desc *rx_desc,
- struct sk_buff *skb)
-{
- /* Ignore Checksum bit is set OR
- * TCP Checksum has not been calculated
- */
- if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) ||
- (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) {
- skb_checksum_none_assert(skb);
- return;
- }
-
- /* At this point we know the hardware did the TCP checksum */
- /* now look at the TCP checksum error bit */
- if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) {
- /* let the stack verify checksum errors */
- skb_checksum_none_assert(skb);
- adapter->hw_csum_rx_error++;
- } else {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- adapter->hw_csum_rx_good++;
- }
-}
-
-/*
- * this should improve performance for small packets with large amounts
- * of reassembly being done in the stack
- */
-static void ixgb_check_copybreak(struct napi_struct *napi,
- struct ixgb_buffer *buffer_info,
- u32 length, struct sk_buff **skb)
-{
- struct sk_buff *new_skb;
-
- if (length > copybreak)
- return;
-
- new_skb = napi_alloc_skb(napi, length);
- if (!new_skb)
- return;
-
- skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
- (*skb)->data - NET_IP_ALIGN,
- length + NET_IP_ALIGN);
- /* save the skb in buffer_info as good */
- buffer_info->skb = *skb;
- *skb = new_skb;
-}
-
-/**
- * ixgb_clean_rx_irq - Send received data up the network stack,
- * @adapter: board private structure
- * @work_done: output pointer to amount of packets cleaned
- * @work_to_do: how much work we can complete
- **/
-
-static bool
-ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_rx_desc *rx_desc, *next_rxd;
- struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
- u32 length;
- unsigned int i, j;
- int cleaned_count = 0;
- bool cleaned = false;
-
- i = rx_ring->next_to_clean;
- rx_desc = IXGB_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
-
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- prefetch(skb->data - NET_IP_ALIGN);
-
- if (++i == rx_ring->count)
- i = 0;
- next_rxd = IXGB_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- j = i + 1;
- if (j == rx_ring->count)
- j = 0;
- next2_buffer = &rx_ring->buffer_info[j];
- prefetch(next2_buffer);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = true;
- cleaned_count++;
-
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
- rx_desc->length = 0;
-
- if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) {
-
- /* All receives must fit into a single buffer */
-
- pr_debug("Receive packet consumed multiple buffers length<%x>\n",
- length);
-
- dev_kfree_skb_irq(skb);
- goto rxdesc_done;
- }
-
- if (unlikely(rx_desc->errors &
- (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE |
- IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) {
- dev_kfree_skb_irq(skb);
- goto rxdesc_done;
- }
-
- ixgb_check_copybreak(&adapter->napi, buffer_info, length, &skb);
-
- /* Good Receive */
- skb_put(skb, length);
-
- /* Receive Checksum Offload */
- ixgb_rx_checksum(adapter, rx_desc, skb);
-
- skb->protocol = eth_type_trans(skb, netdev);
- if (status & IXGB_RX_DESC_STATUS_VP)
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
- le16_to_cpu(rx_desc->special));
-
- netif_receive_skb(skb);
-
-rxdesc_done:
- /* clean up descriptor, might be written over by hw */
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) {
- ixgb_alloc_rx_buffers(adapter, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
-
- rx_ring->next_to_clean = i;
-
- cleaned_count = IXGB_DESC_UNUSED(rx_ring);
- if (cleaned_count)
- ixgb_alloc_rx_buffers(adapter, cleaned_count);
-
- return cleaned;
-}
-
-/**
- * ixgb_alloc_rx_buffers - Replace used receive buffers
- * @adapter: address of board private structure
- * @cleaned_count: how many buffers to allocate
- **/
-
-static void
-ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_rx_desc *rx_desc;
- struct ixgb_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- long cleancount;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
- cleancount = IXGB_DESC_UNUSED(rx_ring);
-
-
- /* leave three descriptors unused */
- while (--cleancount > 2 && cleaned_count--) {
- /* recycle! its good for you */
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto map_skb;
- }
-
- skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
-map_skb:
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- rx_desc = IXGB_RX_DESC(*rx_ring, i);
- rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
- /* guarantee DD bit not set now before h/w gets descriptor
- * this is the rest of the workaround for h/w double
- * writeback. */
- rx_desc->status = 0;
-
-
- if (++i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (likely(rx_ring->next_to_use != i)) {
- rx_ring->next_to_use = i;
- if (unlikely(i-- == 0))
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs, such
- * as IA-64). */
- wmb();
- IXGB_WRITE_REG(&adapter->hw, RDT, i);
- }
-}
-
-static void
-ixgb_vlan_strip_enable(struct ixgb_adapter *adapter)
-{
- u32 ctrl;
-
- /* enable VLAN tag insert/strip */
- ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
- ctrl |= IXGB_CTRL0_VME;
- IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-}
-
-static void
-ixgb_vlan_strip_disable(struct ixgb_adapter *adapter)
-{
- u32 ctrl;
-
- /* disable VLAN tag insert/strip */
- ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
- ctrl &= ~IXGB_CTRL0_VME;
- IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-}
-
-static int
-ixgb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 vfta, index;
-
- /* add VID to filter table */
-
- index = (vid >> 5) & 0x7F;
- vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- vfta |= (1 << (vid & 0x1F));
- ixgb_write_vfta(&adapter->hw, index, vfta);
- set_bit(vid, adapter->active_vlans);
-
- return 0;
-}
-
-static int
-ixgb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 vfta, index;
-
- /* remove VID from filter table */
-
- index = (vid >> 5) & 0x7F;
- vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- vfta &= ~(1 << (vid & 0x1F));
- ixgb_write_vfta(&adapter->hw, index, vfta);
- clear_bit(vid, adapter->active_vlans);
-
- return 0;
-}
-
-static void
-ixgb_restore_vlan(struct ixgb_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- ixgb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
-}
-
-/**
- * ixgb_io_error_detected - called when PCI error is detected
- * @pdev: pointer to pci device with error
- * @state: pci channel state after error
- *
- * This callback is called by the PCI subsystem whenever
- * a PCI bus error is detected.
- */
-static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- ixgb_down(adapter, true);
-
- pci_disable_device(pdev);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * ixgb_io_slot_reset - called after the pci bus has been reset.
- * @pdev: pointer to pci device with error
- *
- * This callback is called after the PCI bus has been reset.
- * Basically, this tries to restart the card from scratch.
- * This is a shortened version of the device probe/discovery code,
- * it resembles the first-half of the ixgb_probe() routine.
- */
-static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u8 addr[ETH_ALEN];
-
- if (pci_enable_device(pdev)) {
- netif_err(adapter, probe, adapter->netdev,
- "Cannot re-enable PCI device after reset\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- /* Perform card reset only on one instance of the card */
- if (0 != PCI_FUNC (pdev->devfn))
- return PCI_ERS_RESULT_RECOVERED;
-
- pci_set_master(pdev);
-
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- ixgb_reset(adapter);
-
- /* Make sure the EEPROM is good */
- if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
- netif_err(adapter, probe, adapter->netdev,
- "After reset, the EEPROM checksum is not valid\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- ixgb_get_ee_mac_addr(&adapter->hw, addr);
- eth_hw_addr_set(netdev, addr);
- memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- netif_err(adapter, probe, adapter->netdev,
- "After reset, invalid MAC address\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * ixgb_io_resume - called when its OK to resume normal operations
- * @pdev: pointer to pci device with error
- *
- * The error recovery driver tells us that its OK to resume
- * normal operation. Implementation resembles the second-half
- * of the ixgb_probe() routine.
- */
-static void ixgb_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- pci_set_master(pdev);
-
- if (netif_running(netdev)) {
- if (ixgb_up(adapter)) {
- pr_err("can't bring device back up after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
- mod_timer(&adapter->watchdog_timer, jiffies);
-}
-
-/* ixgb_main.c */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
deleted file mode 100644
index 7bd54efa698d..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-/* glue for the OS independent part of ixgb
- * includes register access macros
- */
-
-#ifndef _IXGB_OSDEP_H_
-#define _IXGB_OSDEP_H_
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/if_ether.h>
-
-#undef ASSERT
-#define ASSERT(x) BUG_ON(!(x))
-
-#define ENTER() pr_debug("%s\n", __func__);
-
-#define IXGB_WRITE_REG(a, reg, value) ( \
- writel((value), ((a)->hw_addr + IXGB_##reg)))
-
-#define IXGB_READ_REG(a, reg) ( \
- readl((a)->hw_addr + IXGB_##reg))
-
-#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \
- writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2))))
-
-#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \
- readl((a)->hw_addr + IXGB_##reg + ((offset) << 2)))
-
-#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS)
-
-#define IXGB_MEMCPY memcpy
-
-#endif /* _IXGB_OSDEP_H_ */
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c
deleted file mode 100644
index d40f96250691..000000000000
--- a/drivers/net/ethernet/intel/ixgb/ixgb_param.c
+++ /dev/null
@@ -1,442 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 1999 - 2008 Intel Corporation. */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "ixgb.h"
-
-/* This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-
-#define IXGB_MAX_NIC 8
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-/* All parameters are treated the same, as an integer array of values.
- * This macro just reduces the need to repeat the same declaration code
- * over and over (plus this helps to avoid typo bugs).
- */
-
-#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
-#define IXGB_PARAM(X, desc) \
- static int X[IXGB_MAX_NIC+1] \
- = IXGB_PARAM_INIT; \
- static unsigned int num_##X = 0; \
- module_param_array_named(X, X, int, &num_##X, 0); \
- MODULE_PARM_DESC(X, desc);
-
-/* Transmit Descriptor Count
- *
- * Valid Range: 64-4096
- *
- * Default Value: 256
- */
-
-IXGB_PARAM(TxDescriptors, "Number of transmit descriptors");
-
-/* Receive Descriptor Count
- *
- * Valid Range: 64-4096
- *
- * Default Value: 1024
- */
-
-IXGB_PARAM(RxDescriptors, "Number of receive descriptors");
-
-/* User Specified Flow Control Override
- *
- * Valid Range: 0-3
- * - 0 - No Flow Control
- * - 1 - Rx only, respond to PAUSE frames but do not generate them
- * - 2 - Tx only, generate PAUSE frames but ignore them on receive
- * - 3 - Full Flow Control Support
- *
- * Default Value: 2 - Tx only (silicon bug avoidance)
- */
-
-IXGB_PARAM(FlowControl, "Flow Control setting");
-
-/* XsumRX - Receive Checksum Offload Enable/Disable
- *
- * Valid Range: 0, 1
- * - 0 - disables all checksum offload
- * - 1 - enables receive IP/TCP/UDP checksum offload
- * on 82597 based NICs
- *
- * Default Value: 1
- */
-
-IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
-
-/* Transmit Interrupt Delay in units of 0.8192 microseconds
- *
- * Valid Range: 0-65535
- *
- * Default Value: 32
- */
-
-IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay");
-
-/* Receive Interrupt Delay in units of 0.8192 microseconds
- *
- * Valid Range: 0-65535
- *
- * Default Value: 72
- */
-
-IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay");
-
-/* Receive Flow control high threshold (when we send a pause frame)
- * (FCRTH)
- *
- * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity)
- *
- * Default Value: 196,608 (0x30000)
- */
-
-IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold");
-
-/* Receive Flow control low threshold (when we send a resume frame)
- * (FCRTL)
- *
- * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity)
- * must be less than high threshold by at least 8 bytes
- *
- * Default Value: 163,840 (0x28000)
- */
-
-IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold");
-
-/* Flow control request timeout (how long to pause the link partner's tx)
- * (PAP 15:0)
- *
- * Valid Range: 1 - 65535
- *
- * Default Value: 65535 (0xffff) (we'll send an xon if we recover)
- */
-
-IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout");
-
-/* Interrupt Delay Enable
- *
- * Valid Range: 0, 1
- *
- * - 0 - disables transmit interrupt delay
- * - 1 - enables transmmit interrupt delay
- *
- * Default Value: 1
- */
-
-IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
-
-
-#define DEFAULT_TIDV 32
-#define MAX_TIDV 0xFFFF
-#define MIN_TIDV 0
-
-#define DEFAULT_RDTR 72
-#define MAX_RDTR 0xFFFF
-#define MIN_RDTR 0
-
-#define DEFAULT_FCRTL 0x28000
-#define DEFAULT_FCRTH 0x30000
-#define MIN_FCRTL 0
-#define MAX_FCRTL 0x3FFE8
-#define MIN_FCRTH 8
-#define MAX_FCRTH 0x3FFF0
-
-#define MIN_FCPAUSE 1
-#define MAX_FCPAUSE 0xffff
-#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */
-
-struct ixgb_option {
- enum { enable_option, range_option, list_option } type;
- const char *name;
- const char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- const struct ixgb_opt_list {
- int i;
- const char *str;
- } *p;
- } l;
- } arg;
-};
-
-static int
-ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- pr_info("%s Enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- pr_info("%s Disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- pr_info("%s set to %i\n", opt->name, *value);
- return 0;
- }
- break;
- case list_option: {
- int i;
- const struct ixgb_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- pr_info("%s\n", ent->str);
- return 0;
- }
- }
- }
- break;
- default:
- BUG();
- }
-
- pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-/**
- * ixgb_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- **/
-
-void
-ixgb_check_options(struct ixgb_adapter *adapter)
-{
- int bd = adapter->bd_number;
- if (bd >= IXGB_MAX_NIC) {
- pr_notice("Warning: no configuration for board #%i\n", bd);
- pr_notice("Using defaults for all values\n");
- }
-
- { /* Transmit Descriptor Count */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Transmit Descriptors",
- .err = "using default of " __MODULE_STRING(DEFAULT_TXD),
- .def = DEFAULT_TXD,
- .arg = { .r = { .min = MIN_TXD,
- .max = MAX_TXD}}
- };
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
-
- if (num_TxDescriptors > bd) {
- tx_ring->count = TxDescriptors[bd];
- ixgb_validate_option(&tx_ring->count, &opt);
- } else {
- tx_ring->count = opt.def;
- }
- tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
- }
- { /* Receive Descriptor Count */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Receive Descriptors",
- .err = "using default of " __MODULE_STRING(DEFAULT_RXD),
- .def = DEFAULT_RXD,
- .arg = { .r = { .min = MIN_RXD,
- .max = MAX_RXD}}
- };
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
-
- if (num_RxDescriptors > bd) {
- rx_ring->count = RxDescriptors[bd];
- ixgb_validate_option(&rx_ring->count, &opt);
- } else {
- rx_ring->count = opt.def;
- }
- rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
- }
- { /* Receive Checksum Offload Enable */
- static const struct ixgb_option opt = {
- .type = enable_option,
- .name = "Receive Checksum Offload",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_XsumRX > bd) {
- unsigned int rx_csum = XsumRX[bd];
- ixgb_validate_option(&rx_csum, &opt);
- adapter->rx_csum = rx_csum;
- } else {
- adapter->rx_csum = opt.def;
- }
- }
- { /* Flow Control */
-
- static const struct ixgb_opt_list fc_list[] = {
- { ixgb_fc_none, "Flow Control Disabled" },
- { ixgb_fc_rx_pause, "Flow Control Receive Only" },
- { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
- { ixgb_fc_full, "Flow Control Enabled" },
- { ixgb_fc_default, "Flow Control Hardware Default" }
- };
-
- static const struct ixgb_option opt = {
- .type = list_option,
- .name = "Flow Control",
- .err = "reading default settings from EEPROM",
- .def = ixgb_fc_tx_pause,
- .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
- .p = fc_list }}
- };
-
- if (num_FlowControl > bd) {
- unsigned int fc = FlowControl[bd];
- ixgb_validate_option(&fc, &opt);
- adapter->hw.fc.type = fc;
- } else {
- adapter->hw.fc.type = opt.def;
- }
- }
- { /* Receive Flow Control High Threshold */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Rx Flow Control High Threshold",
- .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
- .def = DEFAULT_FCRTH,
- .arg = { .r = { .min = MIN_FCRTH,
- .max = MAX_FCRTH}}
- };
-
- if (num_RxFCHighThresh > bd) {
- adapter->hw.fc.high_water = RxFCHighThresh[bd];
- ixgb_validate_option(&adapter->hw.fc.high_water, &opt);
- } else {
- adapter->hw.fc.high_water = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring RxFCHighThresh when no RxFC\n");
- }
- { /* Receive Flow Control Low Threshold */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Rx Flow Control Low Threshold",
- .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
- .def = DEFAULT_FCRTL,
- .arg = { .r = { .min = MIN_FCRTL,
- .max = MAX_FCRTL}}
- };
-
- if (num_RxFCLowThresh > bd) {
- adapter->hw.fc.low_water = RxFCLowThresh[bd];
- ixgb_validate_option(&adapter->hw.fc.low_water, &opt);
- } else {
- adapter->hw.fc.low_water = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring RxFCLowThresh when no RxFC\n");
- }
- { /* Flow Control Pause Time Request*/
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Flow Control Pause Time Request",
- .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
- .def = DEFAULT_FCPAUSE,
- .arg = { .r = { .min = MIN_FCPAUSE,
- .max = MAX_FCPAUSE}}
- };
-
- if (num_FCReqTimeout > bd) {
- unsigned int pause_time = FCReqTimeout[bd];
- ixgb_validate_option(&pause_time, &opt);
- adapter->hw.fc.pause_time = pause_time;
- } else {
- adapter->hw.fc.pause_time = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring FCReqTimeout when no RxFC\n");
- }
- /* high low and spacing check for rx flow control thresholds */
- if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
- /* high must be greater than low */
- if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
- /* set defaults */
- pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
- adapter->hw.fc.high_water = DEFAULT_FCRTH;
- adapter->hw.fc.low_water = DEFAULT_FCRTL;
- }
- }
- { /* Receive Interrupt Delay */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Receive Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
- .def = DEFAULT_RDTR,
- .arg = { .r = { .min = MIN_RDTR,
- .max = MAX_RDTR}}
- };
-
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- ixgb_validate_option(&adapter->rx_int_delay, &opt);
- } else {
- adapter->rx_int_delay = opt.def;
- }
- }
- { /* Transmit Interrupt Delay */
- static const struct ixgb_option opt = {
- .type = range_option,
- .name = "Transmit Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
- .def = DEFAULT_TIDV,
- .arg = { .r = { .min = MIN_TIDV,
- .max = MAX_TIDV}}
- };
-
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- ixgb_validate_option(&adapter->tx_int_delay, &opt);
- } else {
- adapter->tx_int_delay = opt.def;
- }
- }
-
- { /* Transmit Interrupt Delay Enable */
- static const struct ixgb_option opt = {
- .type = enable_option,
- .name = "Tx Interrupt Delay Enable",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_IntDelayEnable > bd) {
- unsigned int ide = IntDelayEnable[bd];
- ixgb_validate_option(&ide, &opt);
- adapter->tx_int_delay_enable = ide;
- } else {
- adapter->tx_int_delay_enable = opt.def;
- }
- }
-}
--
2.38.1
Powered by blists - more mailing lists