netdev - Re: [PATCH 3/3] arm64: dts: qcom: sc8280xp-crd: add wifi calibration variant

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Mar 2023 12:07:55 +0100
From:   Johan Hovold <johan@...nel.org>
To:     Konrad Dybcio <konrad.dybcio@...aro.org>
Cc:     Johan Hovold <johan+linaro@...nel.org>,
        Kalle Valo <kvalo@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Andy Gross <agross@...nel.org>, linux-wireless@...r.kernel.org,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: sc8280xp-crd: add wifi calibration
 variant

On Mon, Mar 20, 2023 at 11:55:48AM +0100, Johan Hovold wrote:
> On Mon, Mar 20, 2023 at 11:50:30AM +0100, Konrad Dybcio wrote:
> > 
> > 
> > On 20.03.2023 11:46, Johan Hovold wrote:
> > > Describe the bus topology for PCIe domain 6 and add the ath11k
> > > calibration variant so that the board file (calibration data) can be
> > > loaded.
> > > 
> > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=216036
> > > Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 17 +++++++++++++++++
> > >  1 file changed, 17 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > > index 90a5df9c7a24..5dfda12f669b 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > 
> > 
> > Was mixing
> > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > 
> > this /\
> > 
> > [...]
> > 
> > and this \/
> > > +			qcom,ath11k-calibration-variant = "LE_X13S";
> > Intentional? Especially given Kalle's comment on bugzilla?
> 
> Yes, it is intentional. The corresponding calibration data allows the
> wifi to be used on the CRD. I measure 150 MBits/s which may a bit lower
> than expected, but it's better than having no wifi at all.

I was going back and forth about mentioning this in the commit message
and we could off on this one until someone confirms that the
corresponding calibration data can (or should) be used for the X13s.

Note that there is no other match for

	'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=140'

in the new board-2.bin.

Johan