lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 21 Mar 2023 14:09:21 -0500
From:   Shenwei Wang <shenwei.wang@....com>
To:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Shawn Guo <shawnguo@...nel.org>,
        NXP Linux Team <linux-imx@....com>
Cc:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        Wong Vee Khee <veekhee@...le.com>,
        Jon Hunter <jonathanh@...dia.com>,
        Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>,
        Andrey Konovalov <andrey.konovalov@...aro.org>,
        Revanth Kumar Uppala <ruppala@...dia.com>,
        Tan Tee Min <tee.min.tan@...ux.intel.com>,
        Shenwei Wang <shenwei.wang@....com>, netdev@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev
Subject: [PATCH 2/2] net: stmmac: dwmac-imx: use platform specific reset for imx93 SoCs

The patch addresses an issue with the reset logic on the i.MX93 SoC, which
requires configuration of the correct interface speed under RMII mode to
complete the reset. The patch implements a fix_soc_reset function and uses
it specifically for the i.MX93 SoCs.

Signed-off-by: Shenwei Wang <shenwei.wang@....com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   | 27 ++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index ac8580f501e2..3329150010ce 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -19,9 +19,9 @@
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <linux/stmmac.h>
 
 #include "stmmac_platform.h"
+#include "common.h"
 
 #define GPR_ENET_QOS_INTF_MODE_MASK	GENMASK(21, 16)
 #define GPR_ENET_QOS_INTF_SEL_MII	(0x0 << 16)
@@ -37,6 +37,10 @@
 #define MX93_GPR_ENET_QOS_INTF_SEL_RGMII	(0x1 << 1)
 #define MX93_GPR_ENET_QOS_CLK_GEN_EN		(0x1 << 0)
 
+#define DMA_BUS_MODE			0x00001000
+#define DMA_BUS_MODE_SFT_RESET		(0x1 << 0)
+#define RMII_RESET_SPEED		(0x3 << 14)
+
 struct imx_dwmac_ops {
 	u32 addr_width;
 	bool mac_rgmii_txclk_auto_adj;
@@ -207,6 +211,24 @@ static void imx_dwmac_fix_speed(void *priv, unsigned int speed)
 		dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
 }
 
+static int imx_dwmac_mx93_reset(void *priv, void __iomem *ioaddr)
+{
+	struct plat_stmmacenet_data *plat_dat = priv;
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+
+	/* DMA SW reset */
+	value |= DMA_BUS_MODE_SFT_RESET;
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	usleep_range(100, 200);
+	if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+		writel(RMII_RESET_SPEED, ioaddr + MAC_CTRL_REG);
+
+	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
+				 !(value & DMA_BUS_MODE_SFT_RESET),
+				 10000, 1000000);
+}
+
 static int
 imx_dwmac_parse_dt(struct imx_priv_data *dwmac, struct device *dev)
 {
@@ -305,6 +327,9 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_dwmac_init;
 
+	if (of_machine_is_compatible("fsl,imx93"))
+		dwmac->plat_dat->fix_soc_reset = imx_dwmac_mx93_reset;
+
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
 		goto err_drv_probe;
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ