| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Mar 2023 18:14:10 +0000
From: Veerasenareddy Burru <vburru@...vell.com>
To: Leon Romanovsky <leon@...nel.org>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Abhijit Ayarekar <aayarekar@...vell.com>,
Sathesh B Edara <sedara@...vell.com>,
Satananda Burla <sburla@...vell.com>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Subject: RE: [EXT] Re: [PATCH net-next v4 8/8] octeon_ep: add heartbeat
monitor
> -----Original Message-----
> From: Leon Romanovsky <leon@...nel.org>
> Sent: Thursday, March 23, 2023 3:47 AM
> To: Veerasenareddy Burru <vburru@...vell.com>
> Cc: netdev@...r.kernel.org; linux-kernel@...r.kernel.org; Abhijit Ayarekar
> <aayarekar@...vell.com>; Sathesh B Edara <sedara@...vell.com>;
> Satananda Burla <sburla@...vell.com>; linux-doc@...r.kernel.org; David S.
> Miller <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>;
> Jakub Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>
> Subject: [EXT] Re: [PATCH net-next v4 8/8] octeon_ep: add heartbeat
> monitor
>
> External Email
>
> ----------------------------------------------------------------------
> On Wed, Mar 22, 2023 at 02:19:57AM -0700, Veerasenareddy Burru wrote:
> > Monitor periodic heartbeat messages from device firmware.
> > Presence of heartbeat indicates the device is active and running.
> > If the heartbeat is missed for configured interval indicates firmware
> > has crashed and device is unusable; in this case, PF driver stops and
> > uninitialize the device.
> >
> > Signed-off-by: Veerasenareddy Burru <vburru@...vell.com>
> > Signed-off-by: Abhijit Ayarekar <aayarekar@...vell.com>
> > ---
> > v3 -> v4:
> > * 0007-xxx.patch in v3 is 0008-xxx.patch in v4.
> >
> > v2 -> v3:
> > * 0009-xxx.patch in v2 is now 0007-xxx.patch in v3 due to
> > 0007 and 0008.patch from v2 are removed in v3.
> >
> > v1 -> v2:
> > * no change
> >
> > .../marvell/octeon_ep/octep_cn9k_pf.c | 9 ++++
> > .../ethernet/marvell/octeon_ep/octep_config.h | 6 +++
> > .../ethernet/marvell/octeon_ep/octep_main.c | 45
> ++++++++++++++++++-
> > .../ethernet/marvell/octeon_ep/octep_main.h | 7 +++
> > .../marvell/octeon_ep/octep_regs_cn9k_pf.h | 2 +
> > 5 files changed, 67 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
> > index e2503c9bc8a1..90c3a419932d 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
> > @@ -16,6 +16,9 @@
> > #define CTRL_MBOX_MAX_PF 128
> > #define CTRL_MBOX_SZ ((size_t)(0x400000 /
> CTRL_MBOX_MAX_PF))
> >
> > +#define FW_HB_INTERVAL_IN_SECS 1
> > +#define FW_HB_MISS_COUNT 10
> > +
> > /* Names of Hardware non-queue generic interrupts */ static char
> > *cn93_non_ioq_msix_names[] = {
> > "epf_ire_rint",
> > @@ -249,6 +252,10 @@ static void octep_init_config_cn93_pf(struct
> octep_device *oct)
> > conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct-
> >mmio[2].hw_addr +
> > (0x400000ull * 7) +
> > (link * CTRL_MBOX_SZ);
> > +
> > + conf->hb_interval = FW_HB_INTERVAL_IN_SECS;
> > + conf->max_hb_miss_cnt = FW_HB_MISS_COUNT;
> > +
> > }
> >
> > /* Setup registers for a hardware Tx Queue */ @@ -383,6 +390,8 @@
> > static bool octep_poll_non_ioq_interrupts_cn93_pf(struct octep_device
> *oct)
> > octep_write_csr64(oct, CN93_SDP_EPF_OEI_RINT, reg0);
> > if (reg0 & CN93_SDP_EPF_OEI_RINT_DATA_BIT_MBOX)
> > queue_work(octep_wq, &oct->ctrl_mbox_task);
> > + else if (reg0 & CN93_SDP_EPF_OEI_RINT_DATA_BIT_HBEAT)
> > + atomic_set(&oct->hb_miss_cnt, 0);
> >
> > handled = true;
> > }
> > diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
> > index f208f3f9a447..df7cd39d9fce 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
> > @@ -200,5 +200,11 @@ struct octep_config {
> >
> > /* ctrl mbox config */
> > struct octep_ctrl_mbox_config ctrl_mbox_cfg;
> > +
> > + /* Configured maximum heartbeat miss count */
> > + u32 max_hb_miss_cnt;
> > +
> > + /* Configured firmware heartbeat interval in secs */
> > + u32 hb_interval;
> > };
> > #endif /* _OCTEP_CONFIG_H_ */
> > diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > index ba0d5fe3081d..415dd06ff344 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
> > @@ -901,6 +901,38 @@ static void octep_intr_poll_task(struct work_struct
> *work)
> >
> msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS));
> > }
> >
> > +/**
> > + * octep_hb_timeout_task - work queue task to check firmware
> heartbeat.
> > + *
> > + * @work: pointer to hb work_struct
> > + *
> > + * Check for heartbeat miss count. Uninitialize oct device if miss
> > +count
> > + * exceeds configured max heartbeat miss count.
> > + *
> > + **/
> > +static void octep_hb_timeout_task(struct work_struct *work) {
> > + struct octep_device *oct = container_of(work, struct octep_device,
> > + hb_task.work);
> > +
> > + int miss_cnt;
> > +
> > + atomic_inc(&oct->hb_miss_cnt);
> > + miss_cnt = atomic_read(&oct->hb_miss_cnt);
>
> miss_cnt = atomic_inc_return(&oct->hb_miss_cnt);
>
Thanks for the feedback. Will fix it.
> > + if (miss_cnt < oct->conf->max_hb_miss_cnt) {
>
> How is this heartbeat working? You increment on every entry to
> octep_hb_timeout_task(), After max_hb_miss_cnt invocations, you will stop
> your device.
>
> Thanks
>
Yes, device will be stopped after max_hb_miss_cnt heartbeats are missed.
> > + queue_delayed_work(octep_wq, &oct->hb_task,
> > + msecs_to_jiffies(oct->conf->hb_interval *
> 1000));
> > + return;
> > + }
> > +
> > + dev_err(&oct->pdev->dev, "Missed %u heartbeats. Uninitializing\n",
> > + miss_cnt);
> > + rtnl_lock();
> > + if (netif_running(oct->netdev))
> > + octep_stop(oct->netdev);
> > + rtnl_unlock();
> > +}
> > +
> > /**
> > * octep_ctrl_mbox_task - work queue task to handle ctrl mbox messages.
> > *
> > @@ -938,7 +970,7 @@ static const char *octep_devid_to_str(struct
> > octep_device *oct) int octep_device_setup(struct octep_device *oct)
> > {
> > struct pci_dev *pdev = oct->pdev;
> > - int i;
> > + int i, ret;
> >
> > /* allocate memory for oct->conf */
> > oct->conf = kzalloc(sizeof(*oct->conf), GFP_KERNEL); @@ -973,7
> > +1005,15 @@ int octep_device_setup(struct octep_device *oct)
> >
> > oct->pkind = CFG_GET_IQ_PKIND(oct->conf);
> >
> > - return octep_ctrl_net_init(oct);
> > + ret = octep_ctrl_net_init(oct);
> > + if (ret)
> > + return ret;
> > +
> > + atomic_set(&oct->hb_miss_cnt, 0);
> > + INIT_DELAYED_WORK(&oct->hb_task, octep_hb_timeout_task);
> > + queue_delayed_work(octep_wq, &oct->hb_task,
> > + msecs_to_jiffies(oct->conf->hb_interval * 1000));
> > + return 0;
> >
> > unsupported_dev:
> > for (i = 0; i < OCTEP_MMIO_REGIONS; i++) @@ -1002,6 +1042,7 @@
> > static void octep_device_cleanup(struct octep_device *oct)
> > }
> >
> > octep_ctrl_net_uninit(oct);
> > + cancel_delayed_work_sync(&oct->hb_task);
> >
> > oct->hw_ops.soft_reset(oct);
> > for (i = 0; i < OCTEP_MMIO_REGIONS; i++) { diff --git
> > a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
> > index 836d990ba3fa..e0907a719133 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
> > @@ -280,6 +280,13 @@ struct octep_device {
> > bool poll_non_ioq_intr;
> > /* Work entry to poll non-ioq interrupts */
> > struct delayed_work intr_poll_task;
> > +
> > + /* Firmware heartbeat timer */
> > + struct timer_list hb_timer;
> > + /* Firmware heartbeat miss count tracked by timer */
> > + atomic_t hb_miss_cnt;
> > + /* Task to reset device on heartbeat miss */
> > + struct delayed_work hb_task;
> > };
> >
> > static inline u16 OCTEP_MAJOR_REV(struct octep_device *oct) diff
> > --git a/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
> > b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
> > index 0466fd9a002d..b25c3093dc7b 100644
> > --- a/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
> > +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
> > @@ -367,5 +367,7 @@
> >
> > /* bit 0 for control mbox interrupt */
> > #define CN93_SDP_EPF_OEI_RINT_DATA_BIT_MBOX BIT_ULL(0)
> > +/* bit 1 for firmware heartbeat interrupt */
> > +#define CN93_SDP_EPF_OEI_RINT_DATA_BIT_HBEAT BIT_ULL(1)
> >
> > #endif /* _OCTEP_REGS_CN9K_PF_H_ */
> > --
> > 2.36.0
> >
Powered by blists - more mailing lists