Message-ID: <CAJM55Z8_W9yOcL+yGAwB-qanD_-bbf16VjCP66P_xDFW6-c+3A@mail.gmail.com>
Date:   Fri, 24 Mar 2023 14:59:21 +0100
From:   Emil Renner Berthing <emil.renner.berthing@...onical.com>
To:     Samin Guo <samin.guo@...rfivetech.com>
Cc:     linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
        devicetree@...r.kernel.org, netdev@...r.kernel.org,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Emil Renner Berthing <kernel@...il.dk>,
        Jose Abreu <joabreu@...opsys.com>,
        Richard Cochran <richardcochran@...il.com>,
        Conor Dooley <conor@...nel.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Peter Geis <pgwipeout@...il.com>,
        Yanhong Wang <yanhong.wang@...rfivetech.com>,
        Tommaso Merciai <tomm.merciai@...il.com>
Subject: Re: [PATCH v8 6/6] net: stmmac: starfive_dmac: Add phy interface settings

On Fri, 24 Mar 2023 at 03:30, Samin Guo <samin.guo@...rfivetech.com> wrote:
>
> dwmac supports multiple modess. When working under rmii and rgmii,
> you need to set different phy interfaces.
>
> According to the dwmac document, when working in rmii, it needs to be
> set to 0x4, and rgmii needs to be set to 0x1.
>
> The phy interface needs to be set in syscon, the format is as follows:
> starfive,syscon: <&syscon, offset, shift>
>
> Tested-by: Tommaso Merciai <tomm.merciai@...il.com>
> Signed-off-by: Samin Guo <samin.guo@...rfivetech.com>
> ---
>  .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 47 +++++++++++++++++++
>  1 file changed, 47 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> index ef5a769b1c75..84690c8f0250 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> @@ -13,6 +13,10 @@
>
>  #include "stmmac_platform.h"
>
> +#define STARFIVE_DWMAC_PHY_INFT_RGMII  0x1
> +#define STARFIVE_DWMAC_PHY_INFT_RMII   0x4
> +#define STARFIVE_DWMAC_PHY_INFT_FIELD  0x7U
> +
>  struct starfive_dwmac {
>         struct device *dev;
>         struct clk *clk_tx;
> @@ -44,6 +48,43 @@ static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed)
>                 dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
>  }
>
> +static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
> +{
> +       struct starfive_dwmac *dwmac = plat_dat->bsp_priv;
> +       struct regmap *regmap;
> +       unsigned int args[2];
> +       unsigned int mode;
> +
> +       switch (plat_dat->interface) {
> +       case PHY_INTERFACE_MODE_RMII:
> +               mode = STARFIVE_DWMAC_PHY_INFT_RMII;
> +               break;
> +
> +       case PHY_INTERFACE_MODE_RGMII:
> +       case PHY_INTERFACE_MODE_RGMII_ID:
> +               mode = STARFIVE_DWMAC_PHY_INFT_RGMII;
> +               break;
> +
> +       default:
> +               dev_err(dwmac->dev, "unsupported interface %d\n",
> +                       plat_dat->interface);
> +               return -EINVAL;
> +       }
> +
> +       regmap = syscon_regmap_lookup_by_phandle_args(dwmac->dev->of_node,
> +                                                     "starfive,syscon",
> +                                                     2, args);
> +       if (IS_ERR(regmap)) {
> +               dev_err(dwmac->dev, "syscon regmap failed.\n");
> +               return -ENXIO;
> +       }
> +
> +       /* args[0]:offset  args[1]: shift */
> +       return regmap_update_bits(regmap, args[0],
> +                                 STARFIVE_DWMAC_PHY_INFT_FIELD << args[1],
> +                                 mode << args[1]);
> +}
> +
>  static int starfive_dwmac_probe(struct platform_device *pdev)
>  {
>         struct plat_stmmacenet_data *plat_dat;
> @@ -89,6 +130,12 @@ static int starfive_dwmac_probe(struct platform_device *pdev)
>         plat_dat->bsp_priv = dwmac;
>         plat_dat->dma_cfg->dche = true;
>
> +       err = starfive_dwmac_set_mode(plat_dat);
> +       if (err) {
> +               dev_err(&pdev->dev, "dwmac set mode failed.\n");
> +               return err;
> +       }

Usually it's better to keep all error messages at the same "level".
Like this you'll get two error messages if
syscon_regmap_lookup_by_phandle_args fails. So I'd suggest moving this
message into the starfive_dwmac_set_mode function and while you're at
it you can do

err = regmap_update_bits(...);
if (err)
  return dev_err_probe(dwmac->dev, err, "error setting phy mode\n");

Also the file is called dwmac-starfive.c, so I'd expect the patch
header to be "net: stmmac: dwmac-starfive: Add phy interface
settings".

/Emil

>         err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>         if (err) {
>                 stmmac_remove_config_dt(pdev, plat_dat);
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Powered by blists - more mailing lists