| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230326233812.28058-3-steev@kali.org>
Date: Sun, 26 Mar 2023 18:38:10 -0500
From: Steev Klimaszewski <steev@...i.org>
To: Steev Klimaszewski <steev@...i.org>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Sven Peter <sven@...npeter.dev>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-bluetooth@...r.kernel.org,
Mark Pearson <markpearson@...ovo.com>,
Tim Jiang <quic_tjiang@...cinc.com>,
Johan Hovold <johan@...nel.org>
Subject: [PATCH v8 2/4] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855
Add regulators, GPIOs and changes required to power on/off wcn6855.
Add support for firmware download for wcn6855 which is in the
linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.
Based on the assumption that this is similar to the wcn6750
Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1
Signed-off-by: Steev Klimaszewski <steev@...i.org>
Reviewed-by: Bjorn Andersson <andersson@...nel.org>
Tested-by: Bjorn Andersson <andersson@...nel.org>
---
Changes since v7:
* None
Changes since v6:
* Update commit message.
* Add Johan's R-b and T-b.
Changes since v5:
* Revert Set qcadev->initspeed since 6855 doesn't use it, don't touch.
* Convert get_fw_build_info to a switch statement
* Add poweroff handling
* Fix up line alignments
* Drop from microsoft extensions check since I don't actually know if we need
Changes since v4:
* Remove unused firmware check because we don't have mbn firmware.
* Set qcadev->init_speed if it hasn't been set.
Changes since v3:
* drop unused regulators
Changes since v2:
* drop unnecessary commit info
Changes since v1:
* None
drivers/bluetooth/btqca.c | 14 ++++++++-
drivers/bluetooth/btqca.h | 10 +++++++
drivers/bluetooth/hci_qca.c | 57 ++++++++++++++++++++++++++++---------
3 files changed, 66 insertions(+), 15 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index c9064d34d830..fd0941fe8608 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -614,6 +614,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
config.type = ELF_TYPE_PATCH;
snprintf(config.fwname, sizeof(config.fwname),
"qca/msbtfw%02x.mbn", rom_ver);
+ } else if (soc_type == QCA_WCN6855) {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hpbtfw%02x.tlv", rom_ver);
} else {
snprintf(config.fwname, sizeof(config.fwname),
"qca/rampatch_%08x.bin", soc_ver);
@@ -648,6 +651,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
else if (soc_type == QCA_WCN6750)
snprintf(config.fwname, sizeof(config.fwname),
"qca/msnv%02x.bin", rom_ver);
+ else if (soc_type == QCA_WCN6855)
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hpnv%02x.bin", rom_ver);
else
snprintf(config.fwname, sizeof(config.fwname),
"qca/nvm_%08x.bin", soc_ver);
@@ -685,11 +691,17 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
return err;
}
- if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
+ switch (soc_type) {
+ case QCA_WCN3991:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
/* get fw build info */
err = qca_read_fw_build_info(hdev);
if (err < 0)
return err;
+ break;
+ default:
+ break;
}
bt_dev_info(hdev, "QCA setup on UART is completed");
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 61e9a50e66ae..b884095bcd9d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -147,6 +147,7 @@ enum qca_btsoc_type {
QCA_WCN3991,
QCA_QCA6390,
QCA_WCN6750,
+ QCA_WCN6855,
};
#if IS_ENABLED(CONFIG_BT_QCA)
@@ -168,6 +169,10 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
{
return soc_type == QCA_WCN6750;
}
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+ return soc_type == QCA_WCN6855;
+}
#else
@@ -206,6 +211,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
return false;
}
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+ return false;
+}
+
static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3df8c3606e93..38ff962662ff 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1317,7 +1317,8 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
/* Give the controller time to process the request */
if (qca_is_wcn399x(qca_soc_type(hu)) ||
- qca_is_wcn6750(qca_soc_type(hu)))
+ qca_is_wcn6750(qca_soc_type(hu)) ||
+ qca_is_wcn6855(qca_soc_type(hu)))
usleep_range(1000, 10000);
else
msleep(300);
@@ -1394,7 +1395,8 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
static int qca_check_speeds(struct hci_uart *hu)
{
if (qca_is_wcn399x(qca_soc_type(hu)) ||
- qca_is_wcn6750(qca_soc_type(hu))) {
+ qca_is_wcn6750(qca_soc_type(hu)) ||
+ qca_is_wcn6855(qca_soc_type(hu))) {
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
@@ -1428,7 +1430,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
* changing the baudrate of chip and host.
*/
if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type))
+ qca_is_wcn6750(soc_type) ||
+ qca_is_wcn6855(soc_type))
hci_uart_set_flow_control(hu, true);
if (soc_type == QCA_WCN3990) {
@@ -1446,7 +1449,8 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
error:
if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type))
+ qca_is_wcn6750(soc_type) ||
+ qca_is_wcn6855(soc_type))
hci_uart_set_flow_control(hu, false);
if (soc_type == QCA_WCN3990) {
@@ -1682,7 +1686,8 @@ static int qca_power_on(struct hci_dev *hdev)
return 0;
if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type)) {
+ qca_is_wcn6750(soc_type) ||
+ qca_is_wcn6855(soc_type)) {
ret = qca_regulator_init(hu);
} else {
qcadev = serdev_device_get_drvdata(hu->serdev);
@@ -1723,7 +1728,8 @@ static int qca_setup(struct hci_uart *hu)
bt_dev_info(hdev, "setting up %s",
qca_is_wcn399x(soc_type) ? "wcn399x" :
- (soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390");
+ (soc_type == QCA_WCN6750) ? "wcn6750" :
+ (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
qca->memdump_state = QCA_MEMDUMP_IDLE;
@@ -1735,7 +1741,8 @@ static int qca_setup(struct hci_uart *hu)
clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type)) {
+ qca_is_wcn6750(soc_type) ||
+ qca_is_wcn6855(soc_type)) {
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
hci_set_aosp_capable(hdev);
@@ -1757,7 +1764,8 @@ static int qca_setup(struct hci_uart *hu)
}
if (!(qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type))) {
+ qca_is_wcn6750(soc_type) ||
+ qca_is_wcn6855(soc_type))) {
/* Get QCA version information */
ret = qca_read_soc_version(hdev, &ver, soc_type);
if (ret)
@@ -1883,6 +1891,20 @@ static const struct qca_device_data qca_soc_data_wcn6750 = {
.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
};
+static const struct qca_device_data qca_soc_data_wcn6855 = {
+ .soc_type = QCA_WCN6855,
+ .vregs = (struct qca_vreg []) {
+ { "vddio", 5000 },
+ { "vddbtcxmx", 126000 },
+ { "vddrfacmn", 12500 },
+ { "vddrfa0p8", 102000 },
+ { "vddrfa1p7", 302000 },
+ { "vddrfa1p2", 257000 },
+ },
+ .num_vregs = 6,
+ .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
static void qca_power_shutdown(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
@@ -1912,7 +1934,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750) {
+ } else if (soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855) {
gpiod_set_value_cansleep(qcadev->bt_en, 0);
msleep(100);
qca_regulator_disable(qcadev);
@@ -2047,7 +2069,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (data &&
(qca_is_wcn399x(data->soc_type) ||
- qca_is_wcn6750(data->soc_type))) {
+ qca_is_wcn6750(data->soc_type) ||
+ qca_is_wcn6855(data->soc_type))) {
qcadev->btsoc_type = data->soc_type;
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
@@ -2067,14 +2090,18 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
- if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
+ if (IS_ERR_OR_NULL(qcadev->bt_en) &&
+ (data->soc_type == QCA_WCN6750 ||
+ data->soc_type == QCA_WCN6855)) {
dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
power_ctrl_enabled = false;
}
qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
GPIOD_IN);
- if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
+ if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
+ (data->soc_type == QCA_WCN6750 ||
+ data->soc_type == QCA_WCN6855))
dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2150,8 +2177,9 @@ static void qca_serdev_remove(struct serdev_device *serdev)
struct qca_power *power = qcadev->bt_power;
if ((qca_is_wcn399x(qcadev->btsoc_type) ||
- qca_is_wcn6750(qcadev->btsoc_type)) &&
- power->vregs_on)
+ qca_is_wcn6750(qcadev->btsoc_type) ||
+ qca_is_wcn6855(qcadev->btsoc_type)) &&
+ power->vregs_on)
qca_power_shutdown(&qcadev->serdev_hu);
else if (qcadev->susclk)
clk_disable_unprepare(qcadev->susclk);
@@ -2335,6 +2363,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
+ { .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
--
2.39.2
Powered by blists - more mailing lists