lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230328124754.oscahd3wtod6vkfy@kandell>
Date:   Tue, 28 Mar 2023 14:47:54 +0200
From:   Marek BehĂșn <marek.behun@....cz>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Gustav Ekelund <gustav.ekelund@...s.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, kernel@...s.com,
        Gustav Ekelund <gustaek@...s.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] net: dsa: mv88e6xxx: Reset mv88e6393x watchdog
 register

On Tue, Mar 28, 2023 at 02:30:37PM +0200, Andrew Lunn wrote:
> > > +static int mv88e6393x_watchdog_action(struct mv88e6xxx_chip *chip, int irq)
> > > +{
> > > +	mv88e6390_watchdog_action(chip, irq);
> > > +
> > > +	mv88e6xxx_g2_write(chip, MV88E6390_G2_WDOG_CTL,
> > > +			   MV88E6390_G2_WDOG_CTL_UPDATE |
> > > +			   MV88E6390_G2_WDOG_CTL_PTR_EVENT);
> > > +
> > > +	return IRQ_HANDLED;
> > > +}
> > 
> > Shouldn't this update be in .irq_setup() method? In the commit message
> > you're saying that the problem is that bits aren't cleared with SW
> > reset. So I would guess that the change should be in the setup of
> > watchdog IRQ, not in IRQ action?
> 
> I think it is a bit more complex than that. At least for the 6352,
> which i just looked at the data sheet, the interrupt bits are listed
> as "ROC". Which is missing from the list of definitions, but seems to
> mean Read Only, Clear on read. So even if it was not cleared on
> software reset, it would only fire once, and then be cleared.
> 
> The problem description here is that it does not clear on read, it
> needs an explicit write. Which suggests Marvell changed it for the
> 6393.
> 
> So i have a couple of questions:
> 
> 1) Is this new behaviour limited to the 6393, or does the 6390 also
> need this write?

OK I am looking at the func specs of 6390 and 6393x, at the table
descrinbing the Data Path Watch Dog Event register (index 0x12 of global
2, which is the one being written), and the tables are exactly the same.

For every non-reserved bit there is the following:
  This bit is cleared by a SWReset (Global 1 offset 0x04). It will
  automatically be cleared to zero if the SWReset on WD bit (index 0x13)
  is set to a one and this event's Func bit is cleared to zero (index
  0x11).

Moreover only bit 0 of this register (ForceWD Event) is RWR. Bits 1 to 3
(EgressWD Event, QC WD Event and CT WD Event) are all RO. Bits 4-7 are
reserved. (Once again, exactly as in func spec of 6390.)

So I am not exactly sure what is going on. The errata document I have
does not mention watch dog at all.

Marek

> 2) What about other interrupts? Is this the only one which has changed
> behaviour?
> 
> 	Andrew

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ