[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230403110106.983994-1-s-vadapalli@ti.com>
Date: Mon, 3 Apr 2023 16:31:03 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<linux@...linux.org.uk>, <pabeni@...hat.com>, <rogerq@...nel.org>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
<s-vadapalli@...com>
Subject: [PATCH net-next v2 0/3] Add support for J784S4 CPSW9G
Hello,
This series adds a new compatible to am65-cpsw driver for the CPSW9G
instance of the CPSW Ethernet Switch on TI's J784S4 SoC which has 8
external ports and 1 internal host port.
The CPSW9G instance supports QSGMII and USXGMII modes for which driver
support is added.
Additionally, the interface mode specific configurations are moved to the
am65_cpsw_nuss_mac_config() callback. Also, a TODO comment is added for
verifying whether in-band mode is necessary for 10 Mbps RGMII mode.
Changes from v1:
1. Add a patch to move interface mode specific configuration from the
mac_link_up() callback to the mac_config() callback of the am65-cpsw
driver. Also, add a TODO comment for 10 Mbps RGMII in-band mode.
2. Add MAC_5000FD to the list of mac_capabilities member unconditionally,
since the CPSW MAC supports it.
3. Add USXGMII mode specific configuration in the mac_config() callback
along with the SGMII mode specific configuration, instead of the
mac_link_up() callback which was incorrectly done in the v1 series.
v1:
https://lore.kernel.org/r/20230331065110.604516-1-s-vadapalli@ti.com/
Regards,
Siddharth.
Siddharth Vadapalli (3):
net: ethernet: ti: am65-cpsw: Move mode specific config to
mac_config()
net: ethernet: ti: am65-cpsw: Enable QSGMII for J784S4 CPSW9G
net: ethernet: ti: am65-cpsw: Enable USXGMII mode for J784S4 CPSW9G
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 32 +++++++++++++++++++++---
1 file changed, 28 insertions(+), 4 deletions(-)
--
2.25.1
Powered by blists - more mailing lists