lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230405203859.391267-1-arinc.unal@arinc9.com> Date: Wed, 5 Apr 2023 23:38:47 +0300 From: arinc9.unal@...il.com To: René van Dorst <opensource@...rst.com>, Sean Wang <sean.wang@...iatek.com>, Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>, Daniel Golle <daniel@...rotopia.org>, Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Matthias Brugger <matthias.bgg@...il.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, Russell King <linux@...linux.org.uk> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@...il.com>, Richard van Schagen <richard@...terhints.com>, Richard van Schagen <vschagen@...com>, Frank Wunderlich <frank-w@...lic-files.de>, erkin.bozoglu@...ont.com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org Subject: [RFC PATCH net-next 0/12] net: dsa: mt7530: fix port 5 phylink, phy muxing, and port 6 Hello! This patch series is mainly focused on improving the support for port 5, setting up port 6, and refactoring the MT7530 DSA subdriver. The only missing piece to properly support port 5 as a CPU port is the fixes [0] [1] [2] from Richard. I have very thoroughly tested the patch series with every possible mode to use. I'll let the name of the dtb files speak for themselves. MT7621 Unielec: only-gmac0-mt7621-unielec-u7621-06-16m.dtb rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb only-gmac1-mt7621-unielec-u7621-06-16m.dtb gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb phy0-muxing-mt7621-unielec-u7621-06-16m.dtb phy4-muxing-mt7621-unielec-u7621-06-16m.dtb port5-as-user-mt7621-unielec-u7621-06-16m.dtb tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 MT7623 Bananapi: only-gmac0-mt7623n-bananapi-bpi-r2.dtb rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb only-gmac1-mt7623n-bananapi-bpi-r2.dtb gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb phy0-muxing-mt7623n-bananapi-bpi-r2.dtb phy4-muxing-mt7623n-bananapi-bpi-r2.dtb port5-as-user-mt7623n-bananapi-bpi-r2.dtb tftpboot 0x80008000 arm-uImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 Current CPU ports setup of MT7530: mt7530_setup() -> mt7530_setup_port5() mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt753x_pad_setup() -> mt7530_pad_clk_setup() sets up port 6, rename to mt7530_setup_port6() How it will be with the patch series: mt7530_setup() -> mt7530_setup_port5() runs if the port is not used as a CPU, DSA, or user port mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt7530_setup_port6() CPU ports setup of MT7531 for reference: mt7531_setup() -> mt753x_cpu_port_enable() -> mt7531_cpu_port_config() -> mt7531_mac_config() -> mt7531_rgmii_setup() -> mt7531_sgmii_setup_mode_an() -> etc. mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7531_mac_config() -> mt7531_rgmii_setup() -> mt7531_sgmii_setup_mode_an() -> etc. [0] https://lore.kernel.org/netdev/20230212213949.672443-1-richard@routerhints.com/ [1] https://lore.kernel.org/netdev/20230212215152.673221-1-richard@routerhints.com/ [2] https://lore.kernel.org/netdev/20230212214027.672501-1-richard@routerhints.com/ Arınç
Powered by blists - more mailing lists