netdev - [RFC PATCH] net: ipv6: Add Kconfig option to set default value of accept

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:   Sat, 8 Apr 2023 17:24:07 +0900
From:   Josh Triplett <josh@...htriplett.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Jonathan Corbet <corbet@....net>,
        David Ahern <dsahern@...nel.org>, netdev@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH] net: ipv6: Add Kconfig option to set default value of
 accept_dad

The kernel already supports disabling Duplicate Address Detection (DAD)
by setting net.ipv6.conf.$interface.accept_dad to 0. However, for
interfaces available at boot time, the kernel brings up the interface
and sets up the link-local address before processing sysctls set on the
kernel command line; thus, setting
sysctl.net.ipv6.conf.default.accept_dad=0 on the kernel command line
does not suffice to affect such interfaces.

Add a configuration option to set the default value of accept_dad for
new interfaces.

Signed-off-by: Josh Triplett <josh@...htriplett.org>
---

I'm in a virtualized environment, and I'm trying to bring up network
interfaces (including IPv6) extremely quickly and have them be
immediately usable. I tried many different approaches to disable DAD on
the interface, but I didn't find *any* way to successfully disable DAD
before the kernel brought up the link-local address for eth0 and set it
as tentative.

I've verified that this option *does* successfully cause the link-local
address for interfaces to not show up as "tentative".

If this approach isn't appealing, or if there's a better way to
accomplish this, I'd welcome suggestions for alternative approaches.

 Documentation/networking/ip-sysctl.rst |  4 +++-
 net/ipv6/Kconfig                       | 10 ++++++++++
 net/ipv6/addrconf.c                    |  4 ++++
 3 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 87dd1c5283e6..302f1f208339 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -2496,11 +2496,13 @@ accept_dad - INTEGER
 
 	 == ==============================================================
 	  0  Disable DAD
-	  1  Enable DAD (default)
+	  1  Enable DAD
 	  2  Enable DAD, and disable IPv6 operation if MAC-based duplicate
 	     link-local address has been found.
 	 == ==============================================================
 
+	Default: 1 if CONFIG_IPV6_DAD_DEFAULT_DISABLE is not set, otherwise 0.
+
 	DAD operation and mode on a given interface will be selected according
 	to the maximum value of conf/{all,interface}/accept_dad.
 
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 658bfed1df8b..3535e1b6a38f 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -48,6 +48,16 @@ config IPV6_OPTIMISTIC_DAD
 
 	  If unsure, say N.
 
+config IPV6_DAD_DEFAULT_DISABLE
+	bool "IPv6: Disable Duplicate Address Detection by default"
+	help
+	  If enabled, this sets the default value of the
+	  net.ipv6.conf.default.accept_dad sysctl to 0, disabling Duplicate
+	  Address Detection (DAD). This allows the modified default to be
+	  picked up early enough to affect interfaces that exist at boot time.
+
+	  If unsure, say N.
+
 config INET6_AH
 	tristate "IPv6: AH transformation"
 	select XFRM_AH
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index faa47f9ea73a..e931c836a5dd 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -274,7 +274,11 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
 	.proxy_ndp		= 0,
 	.accept_source_route	= 0,	/* we do not accept RH0 by default. */
 	.disable_ipv6		= 0,
+#ifdef CONFIG_IPV6_DAD_DEFAULT_DISABLE
+	.accept_dad		= 0,
+#else
 	.accept_dad		= 1,
+#endif
 	.suppress_frag_ndisc	= 1,
 	.accept_ra_mtu		= 1,
 	.stable_secret		= {
-- 
2.40.0