netdev - Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 19 Apr 2023 16:38:26 +0200
From:   Christian Marangi <ansuelsmth@...il.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Jonathan Corbet <corbet@....net>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Pavel Machek <pavel@....cz>, Lee Jones <lee@...nel.org>,
        John Crispin <john@...ozen.org>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-leds@...r.kernel.org,
        Jonathan McDowell <noodles@...th.li>
Subject: Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add
 Switch LED for each port

On Wed, Apr 19, 2023 at 02:53:45PM +0200, Krzysztof Kozlowski wrote:
> On 17/04/2023 17:17, Christian Marangi wrote:
> > Add Switch LED for each port for MikroTik RB3011UiAS-RM.
> > 
> > MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
> > connected.
> > 
> > It was discovered that in the hardware design all 3 Switch LED trace of
> > the related port is connected to the same LED. This was discovered by
> > setting to 'always on' the related led in the switch regs and noticing
> > that all 3 LED for the specific port (for example for port 1) cause the
> > connected LED for port 1 to turn on. As an extra test we tried enabling
> > 2 different LED for the port resulting in the LED turned off only if
> > every led in the reg was off.
> > 
> > Aside from this funny and strange hardware implementation, the device
> > itself have one green LED for each port, resulting in 10 green LED one
> > for each of the 10 supported port.
> > 
> > Cc: Jonathan McDowell <noodles@...th.li>
> > Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> > ---
> >  arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++
> 
> Please do not send the DTS patches to the net-next, but to the Qualcomm
> SoC maintainers. The DTS must not be mixed with driver code.
> 

Hi,

sorry for the mess, it was asked to give an user of the LED feature for
qca8k so I was a bit confused on where to include it and at the end I
decided to put it in this series.

What was the correct way? 2 different series and reference the DT one in
the net-next? (or not targetting net-next at all?)



-- 
	Ansuel