| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZEfsCit0XX8zqUIJ@makrotopia.org>
Date: Tue, 25 Apr 2023 16:04:42 +0100
From: Daniel Golle <daniel@...rotopia.org>
To: arinc9.unal@...il.com
Cc: Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>,
Arınç ÜNAL <arinc.unal@...nc9.com>,
Richard van Schagen <richard@...terhints.com>,
Richard van Schagen <vschagen@...com>,
Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 04/24] net: dsa: mt7530: properly support
MT7531AE and MT7531BE
On Tue, Apr 25, 2023 at 11:29:13AM +0300, arinc9.unal@...il.com wrote:
> From: Arınç ÜNAL <arinc.unal@...nc9.com>
>
> Introduce the p5_sgmii pointer to store the information for whether port 5
> has got SGMII or not.
The p5_sgmii your are introducing to struct mt7530_priv is a boolean
variable, and not a pointer.
>
> Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
> switch is identified.
>
> Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
> information. Address the code where mt7531_dual_sgmii_supported() is used.
>
> Get rid of mt7531_is_rgmii_port() which just prints the opposite of
> priv->p5_sgmii.
>
> Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
> represent the mode that port 5 is being used in, not the hardware
> information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
> port 5 is not dsa_is_unused_port().
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---
Other than the comment above this change makes sense and looks good to
me, so once you correct the commit message, you may add my Acked-by.
> drivers/net/dsa/mt7530-mdio.c | 7 ++----
> drivers/net/dsa/mt7530.c | 43 ++++++++++++-----------------------
> drivers/net/dsa/mt7530.h | 6 +++--
> 3 files changed, 21 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
> index 088533663b83..fa3ee85a99c1 100644
> --- a/drivers/net/dsa/mt7530-mdio.c
> +++ b/drivers/net/dsa/mt7530-mdio.c
> @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = {
> };
>
> static int
> -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
> +mt7531_create_sgmii(struct mt7530_priv *priv)
> {
> struct regmap_config *mt7531_pcs_config[2] = {};
> struct phylink_pcs *pcs;
> struct regmap *regmap;
> int i, ret = 0;
>
> - /* MT7531AE has two SGMII units for port 5 and port 6
> - * MT7531BE has only one SGMII unit for port 6
> - */
> - for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
> + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) {
> mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
> sizeof(struct regmap_config),
> GFP_KERNEL);
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 7d9f9563dbda..29abf2745294 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
> return 0;
> }
>
> -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
> -{
> - u32 val;
> -
> - val = mt7530_read(priv, MT7531_TOP_SIG_SR);
> -
> - return (val & PAD_DUAL_SGMII_EN) != 0;
> -}
> -
> static int
> mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
> {
> @@ -496,7 +487,7 @@ mt7531_pll_setup(struct mt7530_priv *priv)
> u32 xtal;
> u32 val;
>
> - if (mt7531_dual_sgmii_supported(priv))
> + if (priv->p5_sgmii)
> return;
>
> val = mt7530_read(priv, MT7531_CREV);
> @@ -907,8 +898,6 @@ static const char *p5_intf_modes(unsigned int p5_interface)
> return "PHY P4";
> case P5_INTF_SEL_GMAC5:
> return "GMAC5";
> - case P5_INTF_SEL_GMAC5_SGMII:
> - return "GMAC5_SGMII";
> default:
> return "unknown";
> }
> @@ -2440,6 +2429,12 @@ mt7531_setup(struct dsa_switch *ds)
> return -ENODEV;
> }
>
> + /* MT7531AE has got two SGMII units. One for port 5, one for port 6.
> + * MT7531BE has got only one SGMII unit which is for port 6.
> + */
> + val = mt7530_read(priv, MT7531_TOP_SIG_SR);
> + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
> +
> /* all MACs must be forced link-down before sw reset */
> for (i = 0; i < MT7530_NUM_PORTS; i++)
> mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
> @@ -2451,19 +2446,16 @@ mt7531_setup(struct dsa_switch *ds)
>
> mt7531_pll_setup(priv);
>
> - if (mt7531_dual_sgmii_supported(priv)) {
> - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
> -
> + if (priv->p5_sgmii) {
> /* Let ds->slave_mii_bus be able to access external phy. */
> mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
> MT7531_EXT_P_MDC_11);
> mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
> MT7531_EXT_P_MDIO_12);
> - } else {
> - priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
> }
> - dev_dbg(ds->dev, "P5 support %s interface\n",
> - p5_intf_modes(priv->p5_intf_sel));
> +
> + if (!dsa_is_unused_port(ds, 5))
> + priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
>
> mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
> MT7531_GPIO0_INTERRUPT);
> @@ -2523,11 +2515,6 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
> }
> }
>
> -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
> -{
> - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
> -}
> -
> static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
> struct phylink_config *config)
> {
> @@ -2540,7 +2527,7 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
> break;
>
> case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
> - if (mt7531_is_rgmii_port(priv, port)) {
> + if (!priv->p5_sgmii) {
> phy_interface_set_rgmii(config->supported_interfaces);
> break;
> }
> @@ -2607,7 +2594,7 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
> {
> u32 val;
>
> - if (!mt7531_is_rgmii_port(priv, port)) {
> + if (priv->p5_sgmii) {
> dev_err(priv->dev, "RGMII mode is not available for port %d\n",
> port);
> return -EINVAL;
> @@ -2860,7 +2847,7 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
>
> switch (port) {
> case 5:
> - if (mt7531_is_rgmii_port(priv, port))
> + if (!priv->p5_sgmii)
> interface = PHY_INTERFACE_MODE_RGMII;
> else
> interface = PHY_INTERFACE_MODE_2500BASEX;
> @@ -3019,7 +3006,7 @@ mt753x_setup(struct dsa_switch *ds)
> mt7530_free_irq_common(priv);
>
> if (priv->create_sgmii) {
> - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
> + ret = priv->create_sgmii(priv);
> if (ret && priv->irq)
> mt7530_free_irq(priv);
> }
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index 415d8ea07472..2602c95fd3a5 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -679,7 +679,6 @@ enum p5_interface_select {
> P5_INTF_SEL_PHY_P0,
> P5_INTF_SEL_PHY_P4,
> P5_INTF_SEL_GMAC5,
> - P5_INTF_SEL_GMAC5_SGMII,
> };
>
> struct mt7530_priv;
> @@ -749,6 +748,8 @@ struct mt753x_info {
> * @p6_interface: Holding the current port 6 interface
> * @p5_interface: Holding the current port 5 interface
> * @p5_intf_sel: Holding the current port 5 interface select
> + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
> + * has got SGMII
> * @irq: IRQ number of the switch
> * @irq_domain: IRQ domain of the switch irq_chip
> * @irq_enable: IRQ enable bits, synced to SYS_INT_EN
> @@ -769,6 +770,7 @@ struct mt7530_priv {
> phy_interface_t p6_interface;
> phy_interface_t p5_interface;
> enum p5_interface_select p5_intf_sel;
> + bool p5_sgmii;
> u8 mirror_rx;
> u8 mirror_tx;
> struct mt7530_port ports[MT7530_NUM_PORTS];
> @@ -778,7 +780,7 @@ struct mt7530_priv {
> int irq;
> struct irq_domain *irq_domain;
> u32 irq_enable;
> - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
> + int (*create_sgmii)(struct mt7530_priv *priv);
> };
>
> struct mt7530_hw_vlan_entry {
> --
> 2.37.2
>
Powered by blists - more mailing lists