[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230428002009.2948020-2-vadfed@meta.com>
Date: Thu, 27 Apr 2023 17:20:02 -0700
From: Vadim Fedorenko <vadfed@...a.com>
To: Jakub Kicinski <kuba@...nel.org>, Jiri Pirko <jiri@...nulli.us>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
Jonathan Lemon <jonathan.lemon@...il.com>,
Paolo Abeni <pabeni@...hat.com>
CC: Milena Olech <milena.olech@...el.com>,
Michal Michalik <michal.michalik@...el.com>,
<linux-arm-kernel@...ts.infradead.org>, <poros@...hat.com>,
<mschmidt@...hat.com>, <netdev@...r.kernel.org>,
<linux-clk@...r.kernel.org>,
Vadim Fedorenko <vadim.fedorenko@...ux.dev>
Subject: [RFC PATCH v7 1/8] dpll: spec: Add Netlink spec in YAML
From: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Add a protocol spec for DPLL.
Add code generated from the spec.
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
Signed-off-by: Michal Michalik <michal.michalik@...el.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@...ux.dev>
---
Documentation/netlink/specs/dpll.yaml | 472 ++++++++++++++++++++++++++
drivers/dpll/dpll_nl.c | 126 +++++++
drivers/dpll/dpll_nl.h | 42 +++
include/uapi/linux/dpll.h | 202 +++++++++++
4 files changed, 842 insertions(+)
create mode 100644 Documentation/netlink/specs/dpll.yaml
create mode 100644 drivers/dpll/dpll_nl.c
create mode 100644 drivers/dpll/dpll_nl.h
create mode 100644 include/uapi/linux/dpll.h
diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
new file mode 100644
index 000000000000..67ca0f6cf2d5
--- /dev/null
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -0,0 +1,472 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: dpll
+
+doc: DPLL subsystem.
+
+definitions:
+ -
+ type: enum
+ name: mode
+ doc: |
+ working-modes a dpll can support, differentiate if and how dpll selects
+ one of its sources to syntonize with it, valid values for DPLL_A_MODE
+ attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: manual
+ doc: source can be only selected by sending a request to dpll
+ -
+ name: automatic
+ doc: highest prio, valid source, auto selected by dpll
+ -
+ name: holdover
+ doc: dpll forced into holdover mode
+ -
+ name: freerun
+ doc: dpll driven on system clk, no holdover available
+ -
+ name: nco
+ doc: dpll driven by Numerically Controlled Oscillator
+ render-max: true
+ -
+ type: enum
+ name: lock-status
+ doc: |
+ provides information of dpll device lock status, valid values for
+ DPLL_A_LOCK_STATUS attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: unlocked
+ doc: |
+ dpll was not yet locked to any valid source (or is in one of
+ modes: DPLL_MODE_FREERUN, DPLL_MODE_NCO)
+ -
+ name: calibrating
+ doc: dpll is trying to lock to a valid signal
+ -
+ name: locked
+ doc: dpll is locked
+ -
+ name: holdover
+ doc: |
+ dpll is in holdover state - lost a valid lock or was forced by
+ selecting DPLL_MODE_HOLDOVER mode
+ render-max: true
+ -
+ type: const
+ name: temp-divider
+ value: 10
+ doc: |
+ temperature divider allowing userspace to calculate the
+ temperature as float with single digit precision.
+ Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of
+ tempearture value.
+ Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of
+ temperature value.
+ -
+ type: enum
+ name: type
+ doc: type of dpll, valid values for DPLL_A_TYPE attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: pps
+ doc: dpll produces Pulse-Per-Second signal
+ -
+ name: eec
+ doc: dpll drives the Ethernet Equipment Clock
+ render-max: true
+ -
+ type: enum
+ name: pin-type
+ doc: |
+ defines possible types of a pin, valid values for DPLL_A_PIN_TYPE
+ attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: mux
+ doc: aggregates another layer of selectable pins
+ -
+ name: ext
+ doc: external source
+ -
+ name: synce-eth-port
+ doc: ethernet port PHY's recovered clock
+ -
+ name: int-oscillator
+ doc: device internal oscillator
+ -
+ name: gnss
+ doc: GNSS recovered clock
+ render-max: true
+ -
+ type: enum
+ name: pin-direction
+ doc: |
+ defines possible direction of a pin, valid values for
+ DPLL_A_PIN_DIRECTION attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: source
+ doc: pin used as a source of a signal
+ -
+ name: output
+ doc: pin used to output the signal
+ render-max: true
+ -
+ type: const
+ name: pin-frequency-1-hz
+ value: 1
+ -
+ type: const
+ name: pin-frequency-10-mhz
+ value: 10000000
+ -
+ type: enum
+ name: pin-state
+ doc: |
+ defines possible states of a pin, valid values for
+ DPLL_A_PIN_STATE attribute
+ entries:
+ -
+ name: unspec
+ doc: unspecified value
+ -
+ name: connected
+ doc: pin connected, active source of phase locked loop
+ -
+ name: disconnected
+ doc: pin disconnected, not considered as a valid source
+ -
+ name: selectable
+ doc: pin enabled for automatic source selection
+ render-max: true
+ -
+ type: flags
+ name: pin-caps
+ doc: |
+ defines possible capabilities of a pin, valid flags on
+ DPLL_A_PIN_CAPS attribute
+ entries:
+ -
+ name: direction-can-change
+ -
+ name: priority-can-change
+ -
+ name: state-can-change
+ -
+ type: enum
+ name: event
+ doc: events of dpll generic netlink family
+ entries:
+ -
+ name: unspec
+ doc: invalid event type
+ -
+ name: device-create
+ doc: dpll device created
+ -
+ name: device-delete
+ doc: dpll device deleted
+ -
+ name: device-change
+ doc: |
+ attribute of dpll device or pin changed, reason is to be found with
+ an attribute type (DPLL_A_*) received with the event
+
+
+attribute-sets:
+ -
+ name: dpll
+ enum-name: dplla
+ attributes:
+ -
+ name: device
+ type: nest
+ value: 1
+ multi-attr: true
+ nested-attributes: device
+ -
+ name: id
+ type: u32
+ -
+ name: dev-name
+ type: string
+ -
+ name: bus-name
+ type: string
+ -
+ name: mode
+ type: u8
+ enum: mode
+ -
+ name: mode-supported
+ type: u8
+ enum: mode
+ multi-attr: true
+ -
+ name: lock-status
+ type: u8
+ enum: lock-status
+ -
+ name: temp
+ type: s32
+ -
+ name: clock-id
+ type: u64
+ -
+ name: type
+ type: u8
+ enum: type
+ -
+ name: pin-idx
+ type: u32
+ -
+ name: pin-label
+ type: string
+ -
+ name: pin-type
+ type: u8
+ enum: pin-type
+ -
+ name: pin-direction
+ type: u8
+ enum: pin-direction
+ -
+ name: pin-frequency
+ type: u64
+ -
+ name: pin-frequency-supported
+ type: nest
+ multi-attr: true
+ nested-attributes: pin-frequency-range
+ -
+ name: pin-frequency-min
+ type: u64
+ -
+ name: pin-frequency-max
+ type: u64
+ -
+ name: pin-prio
+ type: u32
+ -
+ name: pin-state
+ type: u8
+ enum: pin-state
+ -
+ name: pin-parent
+ type: nest
+ multi-attr: true
+ nested-attributes: pin-parent
+ -
+ name: pin-parent-idx
+ type: u32
+ -
+ name: pin-rclk-device
+ type: string
+ -
+ name: pin-dpll-caps
+ type: u32
+ -
+ name: device
+ subset-of: dpll
+ attributes:
+ -
+ name: id
+ type: u32
+ value: 2
+ -
+ name: dev-name
+ type: string
+ -
+ name: bus-name
+ type: string
+ -
+ name: mode
+ type: u8
+ enum: mode
+ -
+ name: mode-supported
+ type: u8
+ enum: mode
+ multi-attr: true
+ -
+ name: lock-status
+ type: u8
+ enum: lock-status
+ -
+ name: temp
+ type: s32
+ -
+ name: clock-id
+ type: u64
+ -
+ name: type
+ type: u8
+ enum: type
+ -
+ name: pin-prio
+ type: u32
+ value: 19
+ -
+ name: pin-state
+ type: u8
+ enum: pin-state
+ -
+ name: pin-parent
+ subset-of: dpll
+ attributes:
+ -
+ name: pin-state
+ type: u8
+ value: 20
+ enum: pin-state
+ -
+ name: pin-parent-idx
+ type: u32
+ value: 22
+ -
+ name: pin-rclk-device
+ type: string
+ -
+ name: pin-frequency-range
+ subset-of: dpll
+ attributes:
+ -
+ name: pin-frequency-min
+ type: u64
+ value: 17
+ -
+ name: pin-frequency-max
+ type: u64
+
+operations:
+ list:
+ -
+ name: unspec
+ doc: unused
+
+ -
+ name: device-get
+ doc: |
+ Get list of DPLL devices (dump) or attributes of a single dpll device
+ attribute-set: dpll
+ flags: [ admin-perm ]
+
+ do:
+ pre: dpll-pre-doit
+ post: dpll-post-doit
+ request:
+ attributes:
+ - id
+ - bus-name
+ - dev-name
+ reply:
+ attributes:
+ - device
+
+ dump:
+ pre: dpll-pre-dumpit
+ post: dpll-post-dumpit
+ reply:
+ attributes:
+ - device
+
+ -
+ name: device-set
+ doc: Set attributes for a DPLL device
+ attribute-set: dpll
+ flags: [ admin-perm ]
+
+ do:
+ pre: dpll-pre-doit
+ post: dpll-post-doit
+ request:
+ attributes:
+ - id
+ - bus-name
+ - dev-name
+ - mode
+
+ -
+ name: pin-get
+ doc: |
+ Get list of pins and its attributes.
+ - dump request without any attributes given - list all the pins in the system
+ - dump request with target dpll - list all the pins registered with a given dpll device
+ - do request with target dpll and target pin - single pin attributes
+ attribute-set: dpll
+ flags: [ admin-perm ]
+
+ do:
+ pre: dpll-pin-pre-doit
+ post: dpll-pin-post-doit
+ request:
+ attributes:
+ - id
+ - bus-name
+ - dev-name
+ - pin-idx
+ reply: &pin-attrs
+ attributes:
+ - pin-idx
+ - pin-label
+ - pin-type
+ - pin-direction
+ - pin-frequency
+ - pin-frequency-supported
+ - pin-parent
+ - pin-rclk-device
+ - pin-dpll-caps
+ - device
+
+ dump:
+ pre: dpll-pin-pre-dumpit
+ post: dpll-pin-post-dumpit
+ request:
+ attributes:
+ - id
+ - bus-name
+ - dev-name
+ reply: *pin-attrs
+
+ -
+ name: pin-set
+ doc: Set attributes of a target pin
+ attribute-set: dpll
+ flags: [ admin-perm ]
+
+ do:
+ pre: dpll-pin-pre-doit
+ post: dpll-pin-post-doit
+ request:
+ attributes:
+ - id
+ - bus-name
+ - dev-name
+ - pin-idx
+ - pin-frequency
+ - pin-direction
+ - pin-prio
+ - pin-state
+ - pin-parent-idx
+
+mcast-groups:
+ list:
+ -
+ name: monitor
diff --git a/drivers/dpll/dpll_nl.c b/drivers/dpll/dpll_nl.c
new file mode 100644
index 000000000000..2f8643f401b0
--- /dev/null
+++ b/drivers/dpll/dpll_nl.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+/* Do not edit directly, auto-generated from: */
+/* Documentation/netlink/specs/dpll.yaml */
+/* YNL-GEN kernel source */
+
+#include <net/netlink.h>
+#include <net/genetlink.h>
+
+#include "dpll_nl.h"
+
+#include <linux/dpll.h>
+
+/* DPLL_CMD_DEVICE_GET - do */
+static const struct nla_policy dpll_device_get_nl_policy[DPLL_A_BUS_NAME + 1] = {
+ [DPLL_A_ID] = { .type = NLA_U32, },
+ [DPLL_A_BUS_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_DEV_NAME] = { .type = NLA_NUL_STRING, },
+};
+
+/* DPLL_CMD_DEVICE_SET - do */
+static const struct nla_policy dpll_device_set_nl_policy[DPLL_A_MODE + 1] = {
+ [DPLL_A_ID] = { .type = NLA_U32, },
+ [DPLL_A_BUS_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_DEV_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_MODE] = NLA_POLICY_MAX(NLA_U8, 5),
+};
+
+/* DPLL_CMD_PIN_GET - do */
+static const struct nla_policy dpll_pin_get_do_nl_policy[DPLL_A_PIN_IDX + 1] = {
+ [DPLL_A_ID] = { .type = NLA_U32, },
+ [DPLL_A_BUS_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_DEV_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_PIN_IDX] = { .type = NLA_U32, },
+};
+
+/* DPLL_CMD_PIN_GET - dump */
+static const struct nla_policy dpll_pin_get_dump_nl_policy[DPLL_A_BUS_NAME + 1] = {
+ [DPLL_A_ID] = { .type = NLA_U32, },
+ [DPLL_A_BUS_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_DEV_NAME] = { .type = NLA_NUL_STRING, },
+};
+
+/* DPLL_CMD_PIN_SET - do */
+static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_PARENT_IDX + 1] = {
+ [DPLL_A_ID] = { .type = NLA_U32, },
+ [DPLL_A_BUS_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_DEV_NAME] = { .type = NLA_NUL_STRING, },
+ [DPLL_A_PIN_IDX] = { .type = NLA_U32, },
+ [DPLL_A_PIN_FREQUENCY] = { .type = NLA_U64, },
+ [DPLL_A_PIN_DIRECTION] = NLA_POLICY_MAX(NLA_U8, 2),
+ [DPLL_A_PIN_PRIO] = { .type = NLA_U32, },
+ [DPLL_A_PIN_STATE] = NLA_POLICY_MAX(NLA_U8, 3),
+ [DPLL_A_PIN_PARENT_IDX] = { .type = NLA_U32, },
+};
+
+/* Ops table for dpll */
+static const struct genl_split_ops dpll_nl_ops[] = {
+ {
+ .cmd = DPLL_CMD_DEVICE_GET,
+ .pre_doit = dpll_pre_doit,
+ .doit = dpll_nl_device_get_doit,
+ .post_doit = dpll_post_doit,
+ .policy = dpll_device_get_nl_policy,
+ .maxattr = DPLL_A_BUS_NAME,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
+ },
+ {
+ .cmd = DPLL_CMD_DEVICE_GET,
+ .start = dpll_pre_dumpit,
+ .dumpit = dpll_nl_device_get_dumpit,
+ .done = dpll_post_dumpit,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DUMP,
+ },
+ {
+ .cmd = DPLL_CMD_DEVICE_SET,
+ .pre_doit = dpll_pre_doit,
+ .doit = dpll_nl_device_set_doit,
+ .post_doit = dpll_post_doit,
+ .policy = dpll_device_set_nl_policy,
+ .maxattr = DPLL_A_MODE,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
+ },
+ {
+ .cmd = DPLL_CMD_PIN_GET,
+ .pre_doit = dpll_pin_pre_doit,
+ .doit = dpll_nl_pin_get_doit,
+ .post_doit = dpll_pin_post_doit,
+ .policy = dpll_pin_get_do_nl_policy,
+ .maxattr = DPLL_A_PIN_IDX,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
+ },
+ {
+ .cmd = DPLL_CMD_PIN_GET,
+ .start = dpll_pin_pre_dumpit,
+ .dumpit = dpll_nl_pin_get_dumpit,
+ .done = dpll_pin_post_dumpit,
+ .policy = dpll_pin_get_dump_nl_policy,
+ .maxattr = DPLL_A_BUS_NAME,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DUMP,
+ },
+ {
+ .cmd = DPLL_CMD_PIN_SET,
+ .pre_doit = dpll_pin_pre_doit,
+ .doit = dpll_nl_pin_set_doit,
+ .post_doit = dpll_pin_post_doit,
+ .policy = dpll_pin_set_nl_policy,
+ .maxattr = DPLL_A_PIN_PARENT_IDX,
+ .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
+ },
+};
+
+static const struct genl_multicast_group dpll_nl_mcgrps[] = {
+ [DPLL_NLGRP_MONITOR] = { "monitor", },
+};
+
+struct genl_family dpll_nl_family __ro_after_init = {
+ .name = DPLL_FAMILY_NAME,
+ .version = DPLL_FAMILY_VERSION,
+ .netnsok = true,
+ .parallel_ops = true,
+ .module = THIS_MODULE,
+ .split_ops = dpll_nl_ops,
+ .n_split_ops = ARRAY_SIZE(dpll_nl_ops),
+ .mcgrps = dpll_nl_mcgrps,
+ .n_mcgrps = ARRAY_SIZE(dpll_nl_mcgrps),
+};
diff --git a/drivers/dpll/dpll_nl.h b/drivers/dpll/dpll_nl.h
new file mode 100644
index 000000000000..57ab2da562ba
--- /dev/null
+++ b/drivers/dpll/dpll_nl.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/* Documentation/netlink/specs/dpll.yaml */
+/* YNL-GEN kernel header */
+
+#ifndef _LINUX_DPLL_GEN_H
+#define _LINUX_DPLL_GEN_H
+
+#include <net/netlink.h>
+#include <net/genetlink.h>
+
+#include <linux/dpll.h>
+
+int dpll_pre_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
+ struct genl_info *info);
+int dpll_pin_pre_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
+ struct genl_info *info);
+void
+dpll_post_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
+ struct genl_info *info);
+void
+dpll_pin_post_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
+ struct genl_info *info);
+int dpll_pre_dumpit(struct netlink_callback *cb);
+int dpll_pin_pre_dumpit(struct netlink_callback *cb);
+int dpll_post_dumpit(struct netlink_callback *cb);
+int dpll_pin_post_dumpit(struct netlink_callback *cb);
+
+int dpll_nl_device_get_doit(struct sk_buff *skb, struct genl_info *info);
+int dpll_nl_device_get_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
+int dpll_nl_device_set_doit(struct sk_buff *skb, struct genl_info *info);
+int dpll_nl_pin_get_doit(struct sk_buff *skb, struct genl_info *info);
+int dpll_nl_pin_get_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
+int dpll_nl_pin_set_doit(struct sk_buff *skb, struct genl_info *info);
+
+enum {
+ DPLL_NLGRP_MONITOR,
+};
+
+extern struct genl_family dpll_nl_family;
+
+#endif /* _LINUX_DPLL_GEN_H */
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
new file mode 100644
index 000000000000..e188bc189754
--- /dev/null
+++ b/include/uapi/linux/dpll.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/* Documentation/netlink/specs/dpll.yaml */
+/* YNL-GEN uapi header */
+
+#ifndef _UAPI_LINUX_DPLL_H
+#define _UAPI_LINUX_DPLL_H
+
+#define DPLL_FAMILY_NAME "dpll"
+#define DPLL_FAMILY_VERSION 1
+
+/**
+ * enum dpll_mode - working-modes a dpll can support, differentiate if and how
+ * dpll selects one of its sources to syntonize with it, valid values for
+ * DPLL_A_MODE attribute
+ * @DPLL_MODE_UNSPEC: unspecified value
+ * @DPLL_MODE_MANUAL: source can be only selected by sending a request to dpll
+ * @DPLL_MODE_AUTOMATIC: highest prio, valid source, auto selected by dpll
+ * @DPLL_MODE_HOLDOVER: dpll forced into holdover mode
+ * @DPLL_MODE_FREERUN: dpll driven on system clk, no holdover available
+ * @DPLL_MODE_NCO: dpll driven by Numerically Controlled Oscillator
+ */
+enum dpll_mode {
+ DPLL_MODE_UNSPEC,
+ DPLL_MODE_MANUAL,
+ DPLL_MODE_AUTOMATIC,
+ DPLL_MODE_HOLDOVER,
+ DPLL_MODE_FREERUN,
+ DPLL_MODE_NCO,
+
+ __DPLL_MODE_MAX,
+ DPLL_MODE_MAX = (__DPLL_MODE_MAX - 1)
+};
+
+/**
+ * enum dpll_lock_status - provides information of dpll device lock status,
+ * valid values for DPLL_A_LOCK_STATUS attribute
+ * @DPLL_LOCK_STATUS_UNSPEC: unspecified value
+ * @DPLL_LOCK_STATUS_UNLOCKED: dpll was not yet locked to any valid source (or
+ * is in one of modes: DPLL_MODE_FREERUN, DPLL_MODE_NCO)
+ * @DPLL_LOCK_STATUS_CALIBRATING: dpll is trying to lock to a valid signal
+ * @DPLL_LOCK_STATUS_LOCKED: dpll is locked
+ * @DPLL_LOCK_STATUS_HOLDOVER: dpll is in holdover state - lost a valid lock or
+ * was forced by selecting DPLL_MODE_HOLDOVER mode
+ */
+enum dpll_lock_status {
+ DPLL_LOCK_STATUS_UNSPEC,
+ DPLL_LOCK_STATUS_UNLOCKED,
+ DPLL_LOCK_STATUS_CALIBRATING,
+ DPLL_LOCK_STATUS_LOCKED,
+ DPLL_LOCK_STATUS_HOLDOVER,
+
+ __DPLL_LOCK_STATUS_MAX,
+ DPLL_LOCK_STATUS_MAX = (__DPLL_LOCK_STATUS_MAX - 1)
+};
+
+#define DPLL_TEMP_DIVIDER 10
+
+/**
+ * enum dpll_type - type of dpll, valid values for DPLL_A_TYPE attribute
+ * @DPLL_TYPE_UNSPEC: unspecified value
+ * @DPLL_TYPE_PPS: dpll produces Pulse-Per-Second signal
+ * @DPLL_TYPE_EEC: dpll drives the Ethernet Equipment Clock
+ */
+enum dpll_type {
+ DPLL_TYPE_UNSPEC,
+ DPLL_TYPE_PPS,
+ DPLL_TYPE_EEC,
+
+ __DPLL_TYPE_MAX,
+ DPLL_TYPE_MAX = (__DPLL_TYPE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_type - defines possible types of a pin, valid values for
+ * DPLL_A_PIN_TYPE attribute
+ * @DPLL_PIN_TYPE_UNSPEC: unspecified value
+ * @DPLL_PIN_TYPE_MUX: aggregates another layer of selectable pins
+ * @DPLL_PIN_TYPE_EXT: external source
+ * @DPLL_PIN_TYPE_SYNCE_ETH_PORT: ethernet port PHY's recovered clock
+ * @DPLL_PIN_TYPE_INT_OSCILLATOR: device internal oscillator
+ * @DPLL_PIN_TYPE_GNSS: GNSS recovered clock
+ */
+enum dpll_pin_type {
+ DPLL_PIN_TYPE_UNSPEC,
+ DPLL_PIN_TYPE_MUX,
+ DPLL_PIN_TYPE_EXT,
+ DPLL_PIN_TYPE_SYNCE_ETH_PORT,
+ DPLL_PIN_TYPE_INT_OSCILLATOR,
+ DPLL_PIN_TYPE_GNSS,
+
+ __DPLL_PIN_TYPE_MAX,
+ DPLL_PIN_TYPE_MAX = (__DPLL_PIN_TYPE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_direction - defines possible direction of a pin, valid values
+ * for DPLL_A_PIN_DIRECTION attribute
+ * @DPLL_PIN_DIRECTION_UNSPEC: unspecified value
+ * @DPLL_PIN_DIRECTION_SOURCE: pin used as a source of a signal
+ * @DPLL_PIN_DIRECTION_OUTPUT: pin used to output the signal
+ */
+enum dpll_pin_direction {
+ DPLL_PIN_DIRECTION_UNSPEC,
+ DPLL_PIN_DIRECTION_SOURCE,
+ DPLL_PIN_DIRECTION_OUTPUT,
+
+ __DPLL_PIN_DIRECTION_MAX,
+ DPLL_PIN_DIRECTION_MAX = (__DPLL_PIN_DIRECTION_MAX - 1)
+};
+
+#define DPLL_PIN_FREQUENCY_1_HZ 1
+#define DPLL_PIN_FREQUENCY_10_MHZ 10000000
+
+/**
+ * enum dpll_pin_state - defines possible states of a pin, valid values for
+ * DPLL_A_PIN_STATE attribute
+ * @DPLL_PIN_STATE_UNSPEC: unspecified value
+ * @DPLL_PIN_STATE_CONNECTED: pin connected, active source of phase locked loop
+ * @DPLL_PIN_STATE_DISCONNECTED: pin disconnected, not considered as a valid
+ * source
+ * @DPLL_PIN_STATE_SELECTABLE: pin enabled for automatic source selection
+ */
+enum dpll_pin_state {
+ DPLL_PIN_STATE_UNSPEC,
+ DPLL_PIN_STATE_CONNECTED,
+ DPLL_PIN_STATE_DISCONNECTED,
+ DPLL_PIN_STATE_SELECTABLE,
+
+ __DPLL_PIN_STATE_MAX,
+ DPLL_PIN_STATE_MAX = (__DPLL_PIN_STATE_MAX - 1)
+};
+
+/**
+ * enum dpll_pin_caps - defines possible capabilities of a pin, valid flags on
+ * DPLL_A_PIN_CAPS attribute
+ */
+enum dpll_pin_caps {
+ DPLL_PIN_CAPS_DIRECTION_CAN_CHANGE = 1,
+ DPLL_PIN_CAPS_PRIORITY_CAN_CHANGE = 2,
+ DPLL_PIN_CAPS_STATE_CAN_CHANGE = 4,
+};
+
+/**
+ * enum dpll_event - events of dpll generic netlink family
+ * @DPLL_EVENT_UNSPEC: invalid event type
+ * @DPLL_EVENT_DEVICE_CREATE: dpll device created
+ * @DPLL_EVENT_DEVICE_DELETE: dpll device deleted
+ * @DPLL_EVENT_DEVICE_CHANGE: attribute of dpll device or pin changed, reason
+ * is to be found with an attribute type (DPLL_A_*) received with the event
+ */
+enum dpll_event {
+ DPLL_EVENT_UNSPEC,
+ DPLL_EVENT_DEVICE_CREATE,
+ DPLL_EVENT_DEVICE_DELETE,
+ DPLL_EVENT_DEVICE_CHANGE,
+};
+
+enum dplla {
+ DPLL_A_DEVICE = 1,
+ DPLL_A_ID,
+ DPLL_A_DEV_NAME,
+ DPLL_A_BUS_NAME,
+ DPLL_A_MODE,
+ DPLL_A_MODE_SUPPORTED,
+ DPLL_A_LOCK_STATUS,
+ DPLL_A_TEMP,
+ DPLL_A_CLOCK_ID,
+ DPLL_A_TYPE,
+ DPLL_A_PIN_IDX,
+ DPLL_A_PIN_LABEL,
+ DPLL_A_PIN_TYPE,
+ DPLL_A_PIN_DIRECTION,
+ DPLL_A_PIN_FREQUENCY,
+ DPLL_A_PIN_FREQUENCY_SUPPORTED,
+ DPLL_A_PIN_FREQUENCY_MIN,
+ DPLL_A_PIN_FREQUENCY_MAX,
+ DPLL_A_PIN_PRIO,
+ DPLL_A_PIN_STATE,
+ DPLL_A_PIN_PARENT,
+ DPLL_A_PIN_PARENT_IDX,
+ DPLL_A_PIN_RCLK_DEVICE,
+ DPLL_A_PIN_DPLL_CAPS,
+
+ __DPLL_A_MAX,
+ DPLL_A_MAX = (__DPLL_A_MAX - 1)
+};
+
+enum {
+ DPLL_CMD_UNSPEC = 1,
+ DPLL_CMD_DEVICE_GET,
+ DPLL_CMD_DEVICE_SET,
+ DPLL_CMD_PIN_GET,
+ DPLL_CMD_PIN_SET,
+
+ __DPLL_CMD_MAX,
+ DPLL_CMD_MAX = (__DPLL_CMD_MAX - 1)
+};
+
+#define DPLL_MCGRP_MONITOR "monitor"
+
+#endif /* _UAPI_LINUX_DPLL_H */
--
2.34.1
Powered by blists - more mailing lists