| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZFFn3UdlapiTlCam@corigine.com>
Date: Tue, 2 May 2023 21:43:25 +0200
From: Simon Horman <simon.horman@...igine.com>
To: Justin Chen <justinpopo6@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
bcm-kernel-feedback-list@...adcom.com, justin.chen@...adcom.com,
f.fainelli@...il.com, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, opendmb@...il.com,
andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk,
richardcochran@...il.com, sumit.semwal@...aro.org,
christian.koenig@....com
Subject: Re: [PATCH v2 net-next 3/6] net: bcmasp: Add support for ASP2.0
Ethernet controller
On Wed, Apr 26, 2023 at 11:54:29AM -0700, Justin Chen wrote:
> Add support for the Broadcom ASP 2.0 Ethernet controller which is first
> introduced with 72165. This controller features two distinct Ethernet
> ports that can be independently operated.
>
> This patch supports:
>
> - Wake-on-LAN using magic packets
> - basic ethtool operations (link, counters, message level)
> - MAC destination address filtering (promiscuous, ALL_MULTI, etc.)
>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> Signed-off-by: Justin Chen <justinpopo6@...il.com>
...
> diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp.c b/drivers/net/ethernet/broadcom/asp2/bcmasp.c
...
> +static int bcmasp_netfilt_get_reg_offset(struct bcmasp_priv *priv,
> + struct bcmasp_net_filter *nfilt,
> + enum asp_netfilt_reg_type reg_type,
> + u32 offset)
> +{
> + u32 block_index, filter_sel;
> +
> + if (offset < 32) {
> + block_index = ASP_RX_FILTER_NET_L2;
> + filter_sel = nfilt->hw_index;
> + } else if (offset < 64) {
> + block_index = ASP_RX_FILTER_NET_L2;
> + filter_sel = nfilt->hw_index + 1;
> + } else if (offset < 96) {
> + block_index = ASP_RX_FILTER_NET_L3_0;
> + filter_sel = nfilt->hw_index;
> + } else if (offset < 128) {
> + block_index = ASP_RX_FILTER_NET_L3_0;
> + filter_sel = nfilt->hw_index + 1;
> + } else if (offset < 160) {
> + block_index = ASP_RX_FILTER_NET_L3_1;
> + filter_sel = nfilt->hw_index;
> + } else if (offset < 192) {
> + block_index = ASP_RX_FILTER_NET_L3_1;
> + filter_sel = nfilt->hw_index + 1;
> + } else if (offset < 224) {
> + block_index = ASP_RX_FILTER_NET_L4;
> + filter_sel = nfilt->hw_index;
> + } else if (offset < 256) {
> + block_index = ASP_RX_FILTER_NET_L4;
> + filter_sel = nfilt->hw_index + 1;
> + }
block_index and filter_sel are uninitialised if offset doesn't match any
of the conditions above. Can that happen?
> +
> + switch (reg_type) {
> + case ASP_NETFILT_MATCH:
> + return ASP_RX_FILTER_NET_PAT(filter_sel, block_index,
> + (offset % 32));
> + case ASP_NETFILT_MASK:
> + return ASP_RX_FILTER_NET_MASK(filter_sel, block_index,
> + (offset % 32));
> + default:
> + return -EINVAL;
> + }
> +}
...
> +static void bcmasp_netfilt_tcpip4_wr(struct bcmasp_priv *priv,
> + struct bcmasp_net_filter *nfilt,
> + struct ethtool_tcpip4_spec *match,
> + struct ethtool_tcpip4_spec *mask,
> + u32 offset)
> +{
> + __be16 val_16, mask_16;
> +
> + val_16 = htons(ETH_P_IP);
> + mask_16 = 0xFFFF;
mask_17 is __be16, but 0xFFFF is host byte order.
Please make sure there are no new warnings when building with W=1 C=1.
...
> +/* If no network filter found, return open filter.
> + * If no more open filters return NULL
> + */
> +struct bcmasp_net_filter *bcmasp_netfilt_get_init(struct bcmasp_intf *intf,
> + int loc, bool wake_filter,
> + bool init)
> +{
> + struct bcmasp_priv *priv = intf->parent;
> + struct bcmasp_net_filter *nfilter = NULL;
> + int i, open_index = -1;
Please use reverse xmas tree - longest line to shortest - for local
variable declarations in networking code.
You can check for this using https://github.com/ecree-solarflare/xmastree
...
> +static int bcmasp_combine_set_filter(struct bcmasp_intf *intf,
> + unsigned char *addr, unsigned char *mask,
> + int i)
> +{
> + u64 addr1, addr2, mask1, mask2, mask3;
> + struct bcmasp_priv *priv = intf->parent;
> +
> + /* Switch to u64 to help with the calculations */
> + addr1 = ether_addr_to_u64(priv->mda_filters[i].addr);
> + mask1 = ether_addr_to_u64(priv->mda_filters[i].mask);
> + addr2 = ether_addr_to_u64(addr);
> + mask2 = ether_addr_to_u64(mask);
> +
> + /* Check if one filter resides within the other */
> + mask3 = mask1 & mask2;
> + if (mask3 == mask1 && ((addr1 & mask1) == (addr2 & mask1))) {
> + /* Filter 2 resides within fitler 1, so everthing is good */
nit: s/fitler/filter/
Please consider running ./scripts/checkpatch.pl --codespell
...
> +static void bcmasp_update_mib_counters(struct bcmasp_intf *priv)
> +{
> + int i, j = 0;
> +
> + for (i = 0; i < BCMASP_STATS_LEN; i++) {
> + const struct bcmasp_stats *s;
> + u16 offset = 0;
> + u32 val = 0;
> + char *p;
> +
> + s = &bcmasp_gstrings_stats[i];
> + switch (s->type) {
> + case BCMASP_STAT_NETDEV:
> + case BCMASP_STAT_SOFT:
> + continue;
> + case BCMASP_STAT_RUNT:
> + offset += BCMASP_STAT_OFFSET;
> + fallthrough;
> + case BCMASP_STAT_MIB_TX:
> + offset += BCMASP_STAT_OFFSET;
> + fallthrough;
> + case BCMASP_STAT_MIB_RX:
> + val = umac_rl(priv, UMC_MIB_START + j + offset);
> + offset = 0; /* Reset Offset */
> + break;
> + case BCMASP_STAT_RX_EDPKT:
> + val = rx_edpkt_core_rl(priv->parent, s->reg_offset);
> + break;
> + case BCMASP_STAT_RX_CTRL:
> + offset = bcmasp_stat_fixup_offset(priv, s);
> + if (offset != ASP_RX_CTRL_FB_FILT_OUT_FRAME_COUNT)
> + offset += sizeof(u32) * priv->port;
> + val = rx_ctrl_core_rl(priv->parent, offset);
> + break;
> + }
> +
> + j += s->stat_sizeof;
> + p = (char *)priv + s->stat_offset;
> + *(u32 *)p = val;
Is p always 32bit aligned?
> + }
> +}
> +
> +static void bcmasp_get_ethtool_stats(struct net_device *dev,
> + struct ethtool_stats *stats,
> + u64 *data)
> +{
> + struct bcmasp_intf *priv = netdev_priv(dev);
> + int i, j = 0;
> +
> + if (netif_running(dev))
> + bcmasp_update_mib_counters(priv);
> +
> + dev->netdev_ops->ndo_get_stats(dev);
> +
> + for (i = 0; i < BCMASP_STATS_LEN; i++) {
> + const struct bcmasp_stats *s;
> + char *p;
> +
> + s = &bcmasp_gstrings_stats[i];
> + if (!bcmasp_stat_available(priv, s->type))
> + continue;
> + if (s->type == BCMASP_STAT_NETDEV)
> + p = (char *)&dev->stats;
> + else
> + p = (char *)priv;
> + p += s->stat_offset;
> + if (sizeof(unsigned long) != sizeof(u32) &&
> + s->stat_sizeof == sizeof(unsigned long))
> + data[j] = *(unsigned long *)p;
> + else
> + data[j] = *(u32 *)p;
Maybe memcpy would make this a little easier to read.
> + j++;
> + }
> +}
...
> diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
...
> +static int bcmasp_init_rx(struct bcmasp_intf *intf)
> +{
> + struct device *kdev = &intf->parent->pdev->dev;
> + struct net_device *ndev = intf->ndev;
> + void *p;
> + dma_addr_t dma;
> + struct page *buffer_pg;
> + u32 reg;
> + int ret;
> +
> + intf->rx_buf_order = get_order(RING_BUFFER_SIZE);
> + buffer_pg = alloc_pages(GFP_KERNEL, intf->rx_buf_order);
> +
> + dma = dma_map_page(kdev, buffer_pg, 0, RING_BUFFER_SIZE,
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(kdev, dma)) {
> + netdev_err(ndev, "Cannot allocate RX buffer\n");
I think the core will log an error on allocation failure,
so the message above is not needed.
> + __free_pages(buffer_pg, intf->rx_buf_order);
> + return -ENOMEM;
> + }
...
Powered by blists - more mailing lists