[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230508020953-mutt-send-email-mst@kernel.org>
Date: Mon, 8 May 2023 02:15:46 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Xuan Zhuo <xuanzhuo@...ux.alibaba.com>
Cc: huangml@...ur.tech, zy@...ur.tech, Jason Wang <jasowang@...hat.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
"open list:VIRTIO CORE AND NET DRIVERS" <virtualization@...ts.linux-foundation.org>,
"open list:NETWORKING DRIVERS" <netdev@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
Hao Chen <chenh@...ur.tech>, hengqi@...ux.alibaba.com
Subject: Re: [PATCH] virtio_net: set default mtu to 1500 when 'Device maximum
MTU' bigger than 1500
On Mon, May 08, 2023 at 10:01:59AM +0800, Xuan Zhuo wrote:
> On Sun, 7 May 2023 04:58:58 -0400, "Michael S. Tsirkin" <mst@...hat.com> wrote:
> > On Sat, May 06, 2023 at 04:56:35PM +0800, Hao Chen wrote:
> > >
> > >
> > > 在 2023/5/6 10:50, Xuan Zhuo 写道:
> > > > On Sat, 6 May 2023 10:15:29 +0800, Hao Chen <chenh@...ur.tech> wrote:
> > > > > When VIRTIO_NET_F_MTU(3) Device maximum MTU reporting is supported.
> > > > > If offered by the device, device advises driver about the value of its
> > > > > maximum MTU. If negotiated, the driver uses mtu as the maximum
> > > > > MTU value. But there the driver also uses it as default mtu,
> > > > > some devices may have a maximum MTU greater than 1500, this may
> > > > > cause some large packages to be discarded,
> > > >
> > > > You mean tx packet?
> > > Yes.
> > > >
> > > > If yes, I do not think this is the problem of driver.
> > > >
> > > > Maybe you should give more details about the discard.
> > > >
> > > In the current code, if the maximum MTU supported by the virtio net hardware
> > > is 9000, the default MTU of the virtio net driver will also be set to 9000.
> > > When sending packets through "ping -s 5000", if the peer router does not
> > > support negotiating a path MTU through ICMP packets, the packets will be
> > > discarded. If the peer router supports negotiating path mtu through ICMP
> > > packets, the host side will perform packet sharding processing based on the
> > > negotiated path mtu, which is generally within 1500.
> > > This is not a bugfix patch, I think setting the default mtu to within 1500
> > > would be more suitable here.Thanks.
> >
> > I don't think VIRTIO_NET_F_MTU is appropriate for support for jumbo packets.
> > The spec says:
> > The device MUST forward transmitted packets of up to mtu (plus low level ethernet header length) size with
> > gso_type NONE or ECN, and do so without fragmentation, after VIRTIO_NET_F_MTU has been success-
> > fully negotiated.
> > VIRTIO_NET_F_MTU has been designed for all kind of tunneling devices,
> > and this is why we set mtu to max by default.
> >
> > For things like jumbo frames where MTU might or might not be available,
> > a new feature would be more appropriate.
>
>
> So for jumbo frame, what is the problem?
>
> We are trying to do this. @Heng
>
> Thanks.
It is not a problem as such. But VIRTIO_NET_F_MTU will set the
default MTU not just the maximum one, because spec seems to
say it can.
>
> >
> > > > > so I changed the MTU to a more
> > > > > general 1500 when 'Device maximum MTU' bigger than 1500.
> > > > >
> > > > > Signed-off-by: Hao Chen <chenh@...ur.tech>
> > > > > ---
> > > > > drivers/net/virtio_net.c | 5 ++++-
> > > > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > > > index 8d8038538fc4..e71c7d1b5f29 100644
> > > > > --- a/drivers/net/virtio_net.c
> > > > > +++ b/drivers/net/virtio_net.c
> > > > > @@ -4040,7 +4040,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > > > goto free;
> > > > > }
> > > > >
> > > > > - dev->mtu = mtu;
> > > > > + if (mtu > 1500)
> > > >
> > > > s/1500/ETH_DATA_LEN/
> > > >
> > > > Thanks.
> > > >
> > > > > + dev->mtu = 1500;
> > > > > + else
> > > > > + dev->mtu = mtu;
> > > > > dev->max_mtu = mtu;
> > > > > }
> > > > >
> > > > > --
> > > > > 2.27.0
> > > > >
> >
Powered by blists - more mailing lists