| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZFo+w43/kIAN4ite@nimitz>
Date: Tue, 9 May 2023 14:38:27 +0200
From: Piotr Raczynski <piotr.raczynski@...el.com>
To: Jiawen Wu <jiawenwu@...stnetic.com>
CC: <netdev@...r.kernel.org>, <jarkko.nikula@...ux.intel.com>,
<andriy.shevchenko@...ux.intel.com>, <mika.westerberg@...ux.intel.com>,
<jsd@...ihalf.com>, <Jose.Abreu@...opsys.com>, <andrew@...n.ch>,
<hkallweit1@...il.com>, <linux@...linux.org.uk>, <linux-i2c@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, <mengyuanlou@...-swift.com>
Subject: Re: [PATCH net-next v7 1/9] net: txgbe: Add software nodes to
support phylink
On Tue, May 09, 2023 at 10:27:26AM +0800, Jiawen Wu wrote:
> Register software nodes for GPIO, I2C, SFP and PHYLINK. Define the
> device properties.
>
> Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
LGTM, thanks.
Reviewed-by: Piotr Raczynski <piotr.raczynski@...el.com>
> ---
> drivers/net/ethernet/wangxun/libwx/wx_type.h | 1 +
> drivers/net/ethernet/wangxun/txgbe/Makefile | 1 +
> .../net/ethernet/wangxun/txgbe/txgbe_main.c | 22 ++++-
> .../net/ethernet/wangxun/txgbe/txgbe_phy.c | 89 +++++++++++++++++++
> .../net/ethernet/wangxun/txgbe/txgbe_phy.h | 10 +++
> .../net/ethernet/wangxun/txgbe/txgbe_type.h | 49 ++++++++++
> 6 files changed, 171 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
> create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h
>
> diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
> index 32f952d93009..97bce855bc60 100644
> --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
> +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
> @@ -611,6 +611,7 @@ enum wx_isb_idx {
>
> struct wx {
> u8 __iomem *hw_addr;
> + void *priv;
> struct pci_dev *pdev;
> struct net_device *netdev;
> struct wx_bus_info bus;
> diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile
> index 6db14a2cb2d0..7507f762edfe 100644
> --- a/drivers/net/ethernet/wangxun/txgbe/Makefile
> +++ b/drivers/net/ethernet/wangxun/txgbe/Makefile
> @@ -8,4 +8,5 @@ obj-$(CONFIG_TXGBE) += txgbe.o
>
> txgbe-objs := txgbe_main.o \
> txgbe_hw.o \
> + txgbe_phy.o \
> txgbe_ethtool.o
> diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
> index 5b8a121fb496..e10296abf5b4 100644
> --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
> +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
> @@ -15,6 +15,7 @@
> #include "../libwx/wx_hw.h"
> #include "txgbe_type.h"
> #include "txgbe_hw.h"
> +#include "txgbe_phy.h"
> #include "txgbe_ethtool.h"
>
> char txgbe_driver_name[] = "txgbe";
> @@ -513,6 +514,7 @@ static int txgbe_probe(struct pci_dev *pdev,
> struct net_device *netdev;
> int err, expected_gts;
> struct wx *wx = NULL;
> + struct txgbe *txgbe;
>
> u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0;
> u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0;
> @@ -663,10 +665,23 @@ static int txgbe_probe(struct pci_dev *pdev,
> "0x%08x", etrack_id);
> }
>
> - err = register_netdev(netdev);
> + txgbe = devm_kzalloc(&pdev->dev, sizeof(*txgbe), GFP_KERNEL);
> + if (!txgbe) {
> + err = -ENOMEM;
> + goto err_release_hw;
> + }
> +
> + txgbe->wx = wx;
> + wx->priv = txgbe;
> +
> + err = txgbe_init_phy(txgbe);
> if (err)
> goto err_release_hw;
>
> + err = register_netdev(netdev);
> + if (err)
> + goto err_remove_phy;
> +
> pci_set_drvdata(pdev, wx);
>
> netif_tx_stop_all_queues(netdev);
> @@ -694,6 +709,8 @@ static int txgbe_probe(struct pci_dev *pdev,
>
> return 0;
>
> +err_remove_phy:
> + txgbe_remove_phy(txgbe);
> err_release_hw:
> wx_clear_interrupt_scheme(wx);
> wx_control_hw(wx, false);
> @@ -719,11 +736,14 @@ static int txgbe_probe(struct pci_dev *pdev,
> static void txgbe_remove(struct pci_dev *pdev)
> {
> struct wx *wx = pci_get_drvdata(pdev);
> + struct txgbe *txgbe = wx->priv;
> struct net_device *netdev;
>
> netdev = wx->netdev;
> unregister_netdev(netdev);
>
> + txgbe_remove_phy(txgbe);
> +
> pci_release_selected_regions(pdev,
> pci_select_bars(pdev, IORESOURCE_MEM));
>
> diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
> new file mode 100644
> index 000000000000..3476074869cb
> --- /dev/null
> +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
> +
> +#include <linux/gpio/property.h>
> +#include <linux/i2c.h>
> +#include <linux/pci.h>
> +
> +#include "../libwx/wx_type.h"
> +#include "txgbe_type.h"
> +#include "txgbe_phy.h"
> +
> +static int txgbe_swnodes_register(struct txgbe *txgbe)
> +{
> + struct txgbe_nodes *nodes = &txgbe->nodes;
> + struct pci_dev *pdev = txgbe->wx->pdev;
> + struct software_node *swnodes;
> + u32 id;
> +
> + id = (pdev->bus->number << 8) | pdev->devfn;
> +
> + snprintf(nodes->gpio_name, sizeof(nodes->gpio_name), "txgbe_gpio-%x", id);
> + snprintf(nodes->i2c_name, sizeof(nodes->i2c_name), "txgbe_i2c-%x", id);
> + snprintf(nodes->sfp_name, sizeof(nodes->sfp_name), "txgbe_sfp-%x", id);
> + snprintf(nodes->phylink_name, sizeof(nodes->phylink_name), "txgbe_phylink-%x", id);
> +
> + swnodes = nodes->swnodes;
> +
> + /* GPIO 0: tx fault
> + * GPIO 1: tx disable
> + * GPIO 2: sfp module absent
> + * GPIO 3: rx signal lost
> + * GPIO 4: rate select, 1G(0) 10G(1)
> + * GPIO 5: rate select, 1G(0) 10G(1)
> + */
> + nodes->gpio_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names", "default");
> + swnodes[SWNODE_GPIO] = NODE_PROP(nodes->gpio_name, nodes->gpio_props);
> + nodes->gpio0_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 0, GPIO_ACTIVE_HIGH);
> + nodes->gpio1_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 1, GPIO_ACTIVE_HIGH);
> + nodes->gpio2_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 2, GPIO_ACTIVE_LOW);
> + nodes->gpio3_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 3, GPIO_ACTIVE_HIGH);
> + nodes->gpio4_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 4, GPIO_ACTIVE_HIGH);
> + nodes->gpio5_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 5, GPIO_ACTIVE_HIGH);
> +
> + nodes->i2c_props[0] = PROPERTY_ENTRY_STRING("compatible", "snps,designware-i2c");
> + nodes->i2c_props[1] = PROPERTY_ENTRY_BOOL("snps,i2c-platform");
> + nodes->i2c_props[2] = PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_STANDARD_MODE_FREQ);
> + swnodes[SWNODE_I2C] = NODE_PROP(nodes->i2c_name, nodes->i2c_props);
> + nodes->i2c_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_I2C]);
> +
> + nodes->sfp_props[0] = PROPERTY_ENTRY_STRING("compatible", "sff,sfp");
> + nodes->sfp_props[1] = PROPERTY_ENTRY_REF_ARRAY("i2c-bus", nodes->i2c_ref);
> + nodes->sfp_props[2] = PROPERTY_ENTRY_REF_ARRAY("tx-fault-gpios", nodes->gpio0_ref);
> + nodes->sfp_props[3] = PROPERTY_ENTRY_REF_ARRAY("tx-disable-gpios", nodes->gpio1_ref);
> + nodes->sfp_props[4] = PROPERTY_ENTRY_REF_ARRAY("mod-def0-gpios", nodes->gpio2_ref);
> + nodes->sfp_props[5] = PROPERTY_ENTRY_REF_ARRAY("los-gpios", nodes->gpio3_ref);
> + nodes->sfp_props[6] = PROPERTY_ENTRY_REF_ARRAY("rate-select1-gpios", nodes->gpio4_ref);
> + nodes->sfp_props[7] = PROPERTY_ENTRY_REF_ARRAY("rate-select0-gpios", nodes->gpio5_ref);
> + swnodes[SWNODE_SFP] = NODE_PROP(nodes->sfp_name, nodes->sfp_props);
> + nodes->sfp_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_SFP]);
> +
> + nodes->phylink_props[0] = PROPERTY_ENTRY_STRING("managed", "in-band-status");
> + nodes->phylink_props[1] = PROPERTY_ENTRY_REF_ARRAY("sfp", nodes->sfp_ref);
> + swnodes[SWNODE_PHYLINK] = NODE_PROP(nodes->phylink_name, nodes->phylink_props);
> +
> + nodes->group[SWNODE_GPIO] = &swnodes[SWNODE_GPIO];
> + nodes->group[SWNODE_I2C] = &swnodes[SWNODE_I2C];
> + nodes->group[SWNODE_SFP] = &swnodes[SWNODE_SFP];
> + nodes->group[SWNODE_PHYLINK] = &swnodes[SWNODE_PHYLINK];
> +
> + return software_node_register_node_group(nodes->group);
> +}
> +
> +int txgbe_init_phy(struct txgbe *txgbe)
> +{
> + int ret;
> +
> + ret = txgbe_swnodes_register(txgbe);
> + if (ret) {
> + wx_err(txgbe->wx, "failed to register software nodes\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +void txgbe_remove_phy(struct txgbe *txgbe)
> +{
> + software_node_unregister_node_group(txgbe->nodes.group);
> +}
> diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h
> new file mode 100644
> index 000000000000..1ab592124986
> --- /dev/null
> +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
> +
> +#ifndef _TXGBE_PHY_H_
> +#define _TXGBE_PHY_H_
> +
> +int txgbe_init_phy(struct txgbe *txgbe);
> +void txgbe_remove_phy(struct txgbe *txgbe);
> +
> +#endif /* _TXGBE_NODE_H_ */
> diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
> index 63a1c733718d..5bef0f9df523 100644
> --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
> +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
> @@ -4,6 +4,8 @@
> #ifndef _TXGBE_TYPE_H_
> #define _TXGBE_TYPE_H_
>
> +#include <linux/property.h>
> +
> /* Device IDs */
> #define TXGBE_DEV_ID_SP1000 0x1001
> #define TXGBE_DEV_ID_WX1820 0x2001
> @@ -99,4 +101,51 @@
>
> extern char txgbe_driver_name[];
>
> +static inline struct txgbe *netdev_to_txgbe(struct net_device *netdev)
> +{
> + struct wx *wx = netdev_priv(netdev);
> +
> + return wx->priv;
> +}
> +
> +#define NODE_PROP(_NAME, _PROP) \
> + (const struct software_node) { \
> + .name = _NAME, \
> + .properties = _PROP, \
> + }
> +
> +enum txgbe_swnodes {
> + SWNODE_GPIO = 0,
> + SWNODE_I2C,
> + SWNODE_SFP,
> + SWNODE_PHYLINK,
> + SWNODE_MAX
> +};
> +
> +struct txgbe_nodes {
> + char gpio_name[32];
> + char i2c_name[32];
> + char sfp_name[32];
> + char phylink_name[32];
> + struct property_entry gpio_props[1];
> + struct property_entry i2c_props[3];
> + struct property_entry sfp_props[8];
> + struct property_entry phylink_props[2];
> + struct software_node_ref_args i2c_ref[1];
> + struct software_node_ref_args gpio0_ref[1];
> + struct software_node_ref_args gpio1_ref[1];
> + struct software_node_ref_args gpio2_ref[1];
> + struct software_node_ref_args gpio3_ref[1];
> + struct software_node_ref_args gpio4_ref[1];
> + struct software_node_ref_args gpio5_ref[1];
> + struct software_node_ref_args sfp_ref[1];
> + struct software_node swnodes[SWNODE_MAX];
> + const struct software_node *group[SWNODE_MAX + 1];
> +};
> +
> +struct txgbe {
> + struct wx *wx;
> + struct txgbe_nodes nodes;
> +};
> +
> #endif /* _TXGBE_TYPE_H_ */
> --
> 2.27.0
>
>
Powered by blists - more mailing lists