netdev - [PATCH net 1/1] net: fec: using the standard return codes when xdp xmit errors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230509193845.1090040-1-shenwei.wang@nxp.com>
Date: Tue,  9 May 2023 14:38:45 -0500
From: Shenwei Wang <shenwei.wang@....com>
To: Wei Fang <wei.fang@....com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Shenwei Wang <shenwei.wang@....com>,
	Clark Wang <xiaoning.wang@....com>,
	NXP Linux Team <linux-imx@....com>,
	Alexei Starovoitov <ast@...nel.org>,
	Daniel Borkmann <daniel@...earbox.net>,
	Jesper Dangaard Brouer <hawk@...nel.org>,
	John Fastabend <john.fastabend@...il.com>,
	Alexander Lobakin <alexandr.lobakin@...el.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	imx@...ts.linux.dev
Subject: [PATCH net 1/1] net: fec: using the standard return codes when xdp xmit errors

The existing logic did not properly handle unsuccessful xdp xmit frames,
this patch revises the logic to return standard error codes (-EBUSY or
-ENOMEM) on unsuccessful transmit.

Start the xmit of the frame immediately right after configuring the
tx descriptors.

Fixes: e8a17397180f ("net: fec: correct the counting of XDP sent frames")
Signed-off-by: Shenwei Wang <shenwei.wang@....com>
---
 drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++++++++---------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 42ec6ca3bf03..438fc1c3aea2 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3798,8 +3798,7 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
 	entries_free = fec_enet_get_free_txdesc_num(txq);
 	if (entries_free < MAX_SKB_FRAGS + 1) {
 		netdev_err(fep->netdev, "NOT enough BD for SG!\n");
-		xdp_return_frame(frame);
-		return NETDEV_TX_BUSY;
+		return -EBUSY;
 	}
 
 	/* Fill in a Tx ring entry */
@@ -3813,7 +3812,7 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
 	dma_addr = dma_map_single(&fep->pdev->dev, frame->data,
 				  frame->len, DMA_TO_DEVICE);
 	if (dma_mapping_error(&fep->pdev->dev, dma_addr))
-		return FEC_ENET_XDP_CONSUMED;
+		return -ENOMEM;
 
 	status |= (BD_ENET_TX_INTR | BD_ENET_TX_LAST);
 	if (fep->bufdesc_ex)
@@ -3835,6 +3834,11 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
 	index = fec_enet_get_bd_index(last_bdp, &txq->bd);
 	txq->tx_skbuff[index] = NULL;
 
+	/* Make sure the updates to rest of the descriptor are performed before
+	 * transferring ownership.
+	 */
+	wmb();
+
 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
 	 * it's the last BD of the frame, and to put the CRC on the end.
 	 */
@@ -3844,8 +3848,15 @@ static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
 	/* If this was the last BD in the ring, start at the beginning again. */
 	bdp = fec_enet_get_nextdesc(last_bdp, &txq->bd);
 
+	/* Make sure the update to bdp and tx_skbuff are performed before
+	 * txq->bd.cur.
+	 */
+	wmb();
 	txq->bd.cur = bdp;
 
+	/* Trigger transmission start */
+	writel(0, txq->bd.reg_desc_active);
+
 	return 0;
 }
 
@@ -3869,17 +3880,11 @@ static int fec_enet_xdp_xmit(struct net_device *dev,
 	__netif_tx_lock(nq, cpu);
 
 	for (i = 0; i < num_frames; i++) {
-		if (fec_enet_txq_xmit_frame(fep, txq, frames[i]) != 0)
+		if (fec_enet_txq_xmit_frame(fep, txq, frames[i]) < 0)
 			break;
 		sent_frames++;
 	}
 
-	/* Make sure the update to bdp and tx_skbuff are performed. */
-	wmb();
-
-	/* Trigger transmission start */
-	writel(0, txq->bd.reg_desc_active);
-
 	__netif_tx_unlock(nq);
 
 	return sent_frames;
-- 
2.34.1