lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZFy+SnPWIn8aBRxg@corigine.com> Date: Thu, 11 May 2023 12:07:06 +0200 From: Simon Horman <simon.horman@...igine.com> To: Siddharth Vadapalli <s-vadapalli@...com> Cc: andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, srk@...com Subject: Re: [PATCH net v3] net: phy: dp83867: add w/a for packet errors seen with short cables On Wed, May 10, 2023 at 06:21:39PM +0530, Siddharth Vadapalli wrote: > From: Grygorii Strashko <grygorii.strashko@...com> > > Introduce the W/A for packet errors seen with short cables (<1m) between > two DP83867 PHYs. > > The W/A recommended by DM requires FFE Equalizer Configuration tuning by > writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard > and soft resets as follows: > > write_reg(0x001F, 0x8000); //hard reset > write_reg(DSP_FFE_CFG, 0x0E81); > write_reg(0x001F, 0x4000); //soft reset > > Since DP83867 PHY DM says "Changing this register to 0x0E81, will not > affect Long Cable performance.", enable the W/A by default. > > Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") > Signed-off-by: Grygorii Strashko <grygorii.strashko@...com> > Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com> Reviewed-by: Simon Horman <simon.horman@...igine.com>
Powered by blists - more mailing lists