[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230511172110.2243275-2-f.fainelli@gmail.com>
Date: Thu, 11 May 2023 10:21:08 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Simon Horman <simon.horman@...igine.com>,
Andrew Lunn <andrew@...n.ch>,
Doug Berger <opendmb@...il.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Marek BehĂșn <kabel@...nel.org>,
Peter Geis <pgwipeout@...il.com>,
Frank <Frank.Sae@...or-comm.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next v3 1/3] net: phy: Allow drivers to always call into ->suspend()
A few PHY drivers are currently attempting to not suspend the PHY when
Wake-on-LAN is enabled, however that code is not currently executing at
all due to an early check in phy_suspend().
This prevents PHY drivers from making an appropriate decisions and put
the hardware into a low power state if desired.
In order to allow the PHY drivers to opt into getting their ->suspend
routine to be called, add a PHY_ALWAYS_CALL_SUSPEND bit which can be
set. A boolean that tracks whether the PHY or the attached MAC has
Wake-on-LAN enabled is also provided for convenience.
If phydev::wol_enabled then the PHY shall not prevent its own
Wake-on-LAN detection logic from working and shall not prevent the
Ethernet MAC from receiving packets for matching.
Reviewed-by: Simon Horman <simon.horman@...igine.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/phy/phy_device.c | 5 +++--
include/linux/phy.h | 4 ++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 17d0d0555a79..8852b0c53114 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1860,9 +1860,10 @@ int phy_suspend(struct phy_device *phydev)
if (phydev->suspended)
return 0;
- /* If the device has WOL enabled, we cannot suspend the PHY */
phy_ethtool_get_wol(phydev, &wol);
- if (wol.wolopts || (netdev && netdev->wol_enabled))
+ phydev->wol_enabled = wol.wolopts || (netdev && netdev->wol_enabled);
+ /* If the device has WOL enabled, we cannot suspend the PHY */
+ if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
return -EBUSY;
if (!phydrv || !phydrv->suspend)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c5a0dc829714..e0df8b3c2bdb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -86,6 +86,7 @@ extern const int phy_10gbit_features_array[1];
#define PHY_IS_INTERNAL 0x00000001
#define PHY_RST_AFTER_CLK_EN 0x00000002
#define PHY_POLL_CABLE_TEST 0x00000004
+#define PHY_ALWAYS_CALL_SUSPEND 0x00000008
#define MDIO_DEVICE_IS_PHY 0x80000000
/**
@@ -548,6 +549,8 @@ struct macsec_ops;
* @downshifted_rate: Set true if link speed has been downshifted.
* @is_on_sfp_module: Set true if PHY is located on an SFP module.
* @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY
+ * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN
+ * enabled.
* @state: State of the PHY for management purposes
* @dev_flags: Device-specific flags used by the PHY driver.
*
@@ -644,6 +647,7 @@ struct phy_device {
unsigned downshifted_rate:1;
unsigned is_on_sfp_module:1;
unsigned mac_managed_pm:1;
+ unsigned wol_enabled:1;
unsigned autoneg:1;
/* The most recently read link state */
--
2.34.1
Powered by blists - more mailing lists