| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <302d982c5550f10d589735fc2e46cf27386c39f4.1683756691.git.daniel@makrotopia.org>
Date: Thu, 11 May 2023 00:56:12 +0200
From: Daniel Golle <daniel@...rotopia.org>
To: netdev@...r.kernel.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Subject: [PATCH 1/8] net: phy: realtek: rtl8221: allow to configure SERDES
mode
From: Alexander Couzens <lynxis@...0.eu>
The rtl8221 supports multiple SERDES modes:
- SGMII
- 2500base-x
- HiSGMII
Further it supports rate adaption on SERDES links to allow
slow ethernet speeds (10/100/1000mbit) to work on 2500base-x/HiSGMII
links without reducing the SERDES speed.
When operating without rate adapters the SERDES link will follow the
ethernet speed.
Signed-off-by: Alexander Couzens <lynxis@...0.eu>
---
drivers/net/phy/realtek.c | 55 +++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 3d99fd6664d7..a7dd5a075135 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -53,6 +53,15 @@
RTL8201F_ISR_LINK)
#define RTL8201F_IER 0x13
+#define RTL8221B_MMD_SERDES_CTRL MDIO_MMD_VEND1
+#define RTL8221B_MMD_PHY_CTRL MDIO_MMD_VEND2
+#define RTL8221B_SERDES_OPTION 0x697a
+#define RTL8221B_SERDES_OPTION_MODE_MASK GENMASK(5, 0)
+#define RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII 0
+#define RTL8221B_SERDES_OPTION_MODE_HISGMII_SGMII 1
+#define RTL8221B_SERDES_OPTION_MODE_2500BASEX 2
+#define RTL8221B_SERDES_OPTION_MODE_HISGMII 3
+
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
@@ -849,6 +858,48 @@ static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev)
return IRQ_HANDLED;
}
+static int rtl8221b_config_init(struct phy_device *phydev)
+{
+ u16 option_mode;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_2500BASEX:
+ if (!phydev->is_c45) {
+ option_mode = RTL8221B_SERDES_OPTION_MODE_2500BASEX;
+ break;
+ }
+ fallthrough;
+ case PHY_INTERFACE_MODE_SGMII:
+ option_mode = RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII;
+ break;
+ default:
+ return 0;
+ }
+
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL,
+ 0x75f3, 0);
+
+ phy_modify_mmd_changed(phydev, RTL8221B_MMD_SERDES_CTRL,
+ RTL8221B_SERDES_OPTION,
+ RTL8221B_SERDES_OPTION_MODE_MASK, option_mode);
+ switch (option_mode) {
+ case RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII:
+ case RTL8221B_SERDES_OPTION_MODE_2500BASEX:
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd455);
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
+ break;
+ case RTL8221B_SERDES_OPTION_MODE_HISGMII_SGMII:
+ case RTL8221B_SERDES_OPTION_MODE_HISGMII:
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd433);
+ phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
+ break;
+ }
+
+ return 0;
+}
+
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
@@ -970,6 +1021,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
+ .config_init = rtl8221b_config_init,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
@@ -992,6 +1044,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
+ .config_init = rtl8221b_config_init,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
@@ -1002,6 +1055,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
+ .config_init = rtl8221b_config_init,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
@@ -1012,6 +1066,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
+ .config_init = rtl8221b_config_init,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,
.resume = rtlgen_resume,
--
2.40.0
Powered by blists - more mailing lists