[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230518072657.1.If9539da710217ed92e764cc0ba0f3d2d246a1aee@changeid>
Date: Thu, 18 May 2023 07:26:57 +0000
From: Ying Hsu <yinghsu@...omium.org>
To: netdev@...r.kernel.org
Cc: grundler@...omium.org,
Ying Hsu <yinghsu@...omium.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Paolo Abeni <pabeni@...hat.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
intel-wired-lan@...ts.osuosl.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] igb: Fix igb_down hung on surprise removal
In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
__schedule+0x3b0/0xddb
? __mod_timer+0x164/0x5d3
schedule+0x44/0xa8
schedule_timeout+0xb2/0x2a4
? run_local_timers+0x4e/0x4e
msleep+0x31/0x38
igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
__igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
__dev_close_many+0x95/0xec
dev_close_many+0x6e/0x103
unregister_netdevice_many+0x105/0x5b1
unregister_netdevice_queue+0xc2/0x10d
unregister_netdev+0x1c/0x23
igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
pci_device_remove+0x3f/0x9c
device_release_driver_internal+0xfe/0x1b4
pci_stop_bus_device+0x5b/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_and_remove_bus_device+0x12/0x19
pciehp_unconfigure_device+0x76/0xe9
pciehp_disable_slot+0x6e/0x131
pciehp_handle_presence_or_link_change+0x7a/0x3f7
pciehp_ist+0xbe/0x194
irq_thread_fn+0x22/0x4d
? irq_thread+0x1fd/0x1fd
irq_thread+0x17b/0x1fd
? irq_forced_thread_fn+0x5f/0x5f
kthread+0x142/0x153
? __irq_get_irqchip_state+0x46/0x46
? kthread_associate_blkcg+0x71/0x71
ret_from_fork+0x1f/0x30
In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.
Signed-off-by: Ying Hsu <yinghsu@...omium.org>
---
This commit has been tested on a HP Elite Dragonfly Chromebook and
a Caldigit TS3+ Thunderbolt hub. The Ethernet driver for the hub
is igb. Non-fatal PCIE errors happen when users hot-plug the cables
connected to the chromebook or to the external display.
drivers/net/ethernet/intel/igb/igb_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 58872a4c2540..a8b217368ca1 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -9581,6 +9581,11 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
+ if (state == pci_channel_io_normal) {
+ dev_warn(&pdev->dev, "Non-correctable non-fatal error reported.\n");
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ }
+
netif_device_detach(netdev);
if (state == pci_channel_io_perm_failure)
--
2.40.1.606.ga4b1b128d6-goog
Powered by blists - more mailing lists