lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230522121532.86610-11-arinc.unal@arinc9.com> Date: Mon, 22 May 2023 15:15:12 +0300 From: arinc9.unal@...il.com To: Sean Wang <sean.wang@...iatek.com>, Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>, Daniel Golle <daniel@...rotopia.org>, Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Matthias Brugger <matthias.bgg@...il.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, Russell King <linux@...linux.org.uk> Cc: Arınç ÜNAL <arinc.unal@...nc9.com>, Richard van Schagen <richard@...terhints.com>, Richard van Schagen <vschagen@...com>, Frank Wunderlich <frank-w@...lic-files.de>, Bartel Eerdekens <bartel.eerdekens@...stell8.be>, erkin.bozoglu@...ont.com, mithat.guner@...ont.com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org Subject: [PATCH net-next 10/30] net: dsa: mt7530: call port 6 setup from mt7530_mac_config() From: Arınç ÜNAL <arinc.unal@...nc9.com> mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more things than setting up port 6. That part was moved to more appropriate locations, mt7530_setup() and mt7530_pll_setup(). Now that all it does is set up port 6, rename it to mt7530_setup_port6(), and move it to a more appropriate location, under mt7530_mac_config(). Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function pointer. This is the code path for setting up the ports before: mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt753x_pad_setup() -> mt7530_pad_clk_setup() This is after: mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt7530_setup_port6() Tested-by: Arınç ÜNAL <arinc.unal@...nc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com> --- drivers/net/dsa/mt7530.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 50f150ff481a..0b0ed1bd2afa 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -401,7 +401,7 @@ static void mt7530_pll_setup(struct mt7530_priv *priv) /* Setup port 6 interface mode and TRGMII TX circuit */ static int -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, trgint, xtal; @@ -473,6 +473,12 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) return 0; } +static int +mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) +{ + return 0; +} + static int mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { @@ -2571,12 +2577,15 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; + int ret; - /* Only need to setup port5. */ - if (port != 5) - return 0; - - mt7530_setup_port5(priv->ds, interface); + if (port == 5) { + mt7530_setup_port5(priv->ds, interface); + } else if (port == 6) { + ret = mt7530_setup_port6(priv->ds, interface); + if (ret) + return ret; + } return 0; } -- 2.39.2
Powered by blists - more mailing lists