lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230522-shine-attitude-09ec9aefce64-mkl@pengutronix.de>
Date: Mon, 22 May 2023 10:13:06 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
Cc: Frank Jungclaus <frank.jungclaus@....eu>, linux-can@...r.kernel.org,
Wolfgang Grandegger <wg@...ndegger.com>,
Stefan Mätje <stefan.maetje@....eu>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/6] can: esd_usb: Make use of existing kernel macros
On 21.05.2023 18:16:13, Vincent MAILHOL wrote:
> Thanks for the patch.
>
> On Sat. 20 May 2023 at 04:57, Frank Jungclaus <frank.jungclaus@....eu> wrote:
> > Make use of existing kernel macros:
> > - Use the unit suffixes from linux/units.h for the controller clock
> > frequencies
> > - Use the BIT() and the GENMASK() macro to set specific bits in some
> > constants
> > - Use CAN_MAX_DLEN (instead of directly using the value 8) for the
> > maximum CAN payload length
> >
> > Additionally:
> > - Spend some commenting for the previously changed constants
> > - Add the current year to the copyright notice
> > - While adding the header linux/units.h to the list of include files
> > also sort that list alphabetically
> >
> > Suggested-by: Vincent MAILHOL <mailhol.vincent@...adoo.fr>
> > Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/
> > Link: https://lore.kernel.org/all/CAMZ6RqKdg5YBufa0C+ttzJvoG=9yuti-8AmthCi4jBbd08JEtw@mail.gmail.com/
> > Suggested-by: Marc Kleine-Budde <mkl@...gutronix.de>
> > Link: https://lore.kernel.org/all/20230518-grower-film-ea8b5f853f3e-mkl@pengutronix.de/
> > Signed-off-by: Frank Jungclaus <frank.jungclaus@....eu>
> > ---
> > drivers/net/can/usb/esd_usb.c | 40 ++++++++++++++++++-----------------
> > 1 file changed, 21 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> > index d33bac3a6c10..32354cfdf151 100644
> > --- a/drivers/net/can/usb/esd_usb.c
> > +++ b/drivers/net/can/usb/esd_usb.c
> > @@ -3,19 +3,20 @@
> > * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro
> > *
> > * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@....eu>
> > - * Copyright (C) 2022 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@....eu>
> > + * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@....eu>
> > */
> > +#include <linux/can.h>
> > +#include <linux/can/dev.h>
> > +#include <linux/can/error.h>
> > +
> > #include <linux/ethtool.h>
> > -#include <linux/signal.h>
> > -#include <linux/slab.h>
> > #include <linux/module.h>
> > #include <linux/netdevice.h>
> > +#include <linux/signal.h>
> > +#include <linux/slab.h>
> > +#include <linux/units.h>
> > #include <linux/usb.h>
> >
> > -#include <linux/can.h>
> > -#include <linux/can/dev.h>
> > -#include <linux/can/error.h>
> > -
> > MODULE_AUTHOR("Matthias Fuchs <socketcan@....eu>");
> > MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@....eu>");
> > MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces");
> > @@ -27,8 +28,8 @@ MODULE_LICENSE("GPL v2");
> > #define USB_CANUSBM_PRODUCT_ID 0x0011
> >
> > /* CAN controller clock frequencies */
> > -#define ESD_USB2_CAN_CLOCK 60000000
> > -#define ESD_USBM_CAN_CLOCK 36000000
> > +#define ESD_USB2_CAN_CLOCK (60 * MEGA) /* Hz */
> > +#define ESD_USBM_CAN_CLOCK (36 * MEGA) /* Hz */
> >
> > /* Maximum number of CAN nets */
> > #define ESD_USB_MAX_NETS 2
> > @@ -42,20 +43,21 @@ MODULE_LICENSE("GPL v2");
> > #define CMD_IDADD 6 /* also used for IDADD_REPLY */
> >
> > /* esd CAN message flags - dlc field */
> > -#define ESD_RTR 0x10
> > +#define ESD_RTR BIT(4)
> > +
> >
> > /* esd CAN message flags - id field */
> > -#define ESD_EXTID 0x20000000
> > -#define ESD_EVENT 0x40000000
> > -#define ESD_IDMASK 0x1fffffff
> > +#define ESD_EXTID BIT(29)
> > +#define ESD_EVENT BIT(30)
> > +#define ESD_IDMASK GENMASK(28, 0)
> >
> > /* esd CAN event ids */
> > #define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */
> >
> > /* baudrate message flags */
> > -#define ESD_USB_UBR 0x80000000
> > -#define ESD_USB_LOM 0x40000000
> > -#define ESD_USB_NO_BAUDRATE 0x7fffffff
> > +#define ESD_USB_LOM BIT(30) /* 0x40000000, Listen Only Mode */
> > +#define ESD_USB_UBR BIT(31) /* 0x80000000, User Bit Rate (controller BTR) in bits 0..27 */
> ^^^^^^^^^^
>
> As pointented by Marc, no need for redundant comment with the hexadecimal value.
Fixed while applying.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists