[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1q1UME-007FT0-Dw@rmk-PC.armlinux.org.uk>
Date: Tue, 23 May 2023 16:55:30 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Daniel Machon <daniel.machon@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Jakub Kicinski <kuba@...nel.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
Madalin Bucur <madalin.bucur@....com>,
Marcin Wojtas <mw@...ihalf.com>,
Michal Simek <michal.simek@....com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>,
Sean Anderson <sean.anderson@...o.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Taras Chornyi <taras.chornyi@...ision.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
UNGLinuxDriver@...rochip.com,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH RFC net-next 5/9] net: mvneta: switch PCS driver to use
phylink_pcs_neg_mode()
Use the newly introduced phylink_pcs_neg_mode() to configure whether
inband-AN should be used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e2abc00d0472..d669276639b1 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4009,6 +4009,7 @@ static int mvneta_pcs_config(struct phylink_pcs *pcs,
{
struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
u32 mask, val, an, old_an, changed;
+ unsigned int neg_mode;
mask = MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_INBAND_RESTART_AN |
@@ -4016,7 +4017,9 @@ static int mvneta_pcs_config(struct phylink_pcs *pcs,
MVNETA_GMAC_AN_FLOW_CTRL_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
- if (phylink_autoneg_inband(mode)) {
+ neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
+
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
mask |= MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_CONFIG_FULL_DUPLEX;
--
2.30.2
Powered by blists - more mailing lists