[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1q1UMY-007FTP-SG@rmk-PC.armlinux.org.uk>
Date: Tue, 23 May 2023 16:55:50 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Daniel Machon <daniel.machon@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Jakub Kicinski <kuba@...nel.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
Madalin Bucur <madalin.bucur@....com>,
Marcin Wojtas <mw@...ihalf.com>,
Michal Simek <michal.simek@....com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>,
Sean Anderson <sean.anderson@...o.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Taras Chornyi <taras.chornyi@...ision.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
UNGLinuxDriver@...rochip.com,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH RFC net-next 9/9] net: sparx5: switch PCS driver to use
phylink_pcs_neg_mode()
Use the newly introduced phylink_pcs_neg_mode() to configure whether
inband-AN should be used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
index bb97d27a1da4..87bdec185383 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
@@ -99,13 +99,17 @@ static int sparx5_pcs_config(struct phylink_pcs *pcs,
{
struct sparx5_port *port = sparx5_pcs_to_port(pcs);
struct sparx5_port_config conf;
+ unsigned int neg_mode;
int ret = 0;
+ neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
+
conf = port->conf;
conf.power_down = false;
conf.portmode = interface;
- conf.inband = phylink_autoneg_inband(mode);
- conf.autoneg = phylink_test(advertising, Autoneg);
+ conf.inband = neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED ||
+ neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
+ conf.autoneg = neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
conf.pause_adv = 0;
if (phylink_test(advertising, Pause))
conf.pause_adv |= ADVERTISE_1000XPAUSE;
--
2.30.2
Powered by blists - more mailing lists