netdev - Re: [PATCH net-next v3 4/7] net: dsa: mv88e6xxx: add field to specify internal phys layout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <93e2804a-0da2-48a7-942b-5231772459b9@lunn.ch>
Date: Wed, 24 May 2023 19:10:05 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Alexis Lothoré <alexis.lothore@...tlin.com>
Cc: Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Richard Cochran <richardcochran@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Russell King <linux@...linux.org.uk>, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org, devicetree@...r.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
	paul.arola@...us.com, scott.roberts@...us.com,
	Marek Behún <kabel@...nel.org>
Subject: Re: [PATCH net-next v3 4/7] net: dsa: mv88e6xxx: add field to
 specify internal phys layout

On Wed, May 24, 2023 at 03:01:24PM +0200, Alexis Lothoré wrote:
> mv88e6xxx currently assumes that switch equipped with internal phys have
> those phys mapped contiguously starting from port 0 (see
> mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
> NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
> integrated PHYs available on ports 1 to 8
> To properly support this offset, add a new field to allow specifying an
> internal PHYs layout. If field is not set, default layout is assumed (start
> at port 0)
> 
> ---
> Changes since v2:
> - move start/end computation out of for loop
> - remove whitespace
> 
> Signed-off-by: Alexis Lothoré <alexis.lothore@...tlin.com>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew