netdev - [PATCH V3 net-next 0/2] virtio-net: don't busy poll for cvq command

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230524081842.3060-1-jasowang@redhat.com>
Date: Wed, 24 May 2023 16:18:40 +0800
From: Jason Wang <jasowang@...hat.com>
To: mst@...hat.com,
	jasowang@...hat.com,
	xuanzhuo@...ux.alibaba.com,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: virtualization@...ts.linux-foundation.org,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	alvaro.karsz@...id-run.com
Subject: [PATCH V3 net-next 0/2] virtio-net: don't busy poll for cvq command

Hi all:

The code used to busy poll for cvq command which turns out to have
several side effects:

1) infinite poll for buggy devices
2) bad interaction with scheduler

So this series tries to use cond_resched() in the waiting loop. Before
doing this we need first make sure the cvq command is not executed in
atomic environment, so we need first convert rx mode handling to a
workqueue.

Please review.

Thanks

Changes since V2:

- Don't use interrupt but cond_resched()

Changes since V1:

- use RTNL to synchronize rx mode worker
- use completion for simplicity
- don't try to harden CVQ command

Changes since RFC:

- switch to use BAD_RING in virtio_break_device()
- check virtqueue_is_broken() after being woken up
- use more_used() instead of virtqueue_get_buf() to allow caller to
  get buffers afterwards
  - break the virtio-net device when timeout
  - get buffer manually since the virtio core check more_used() instead

Jason Wang (2):
  virtio-net: convert rx mode setting to use workqueue
  virtio-net: add cond_resched() to the command waiting loop

 drivers/net/virtio_net.c | 59 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 55 insertions(+), 4 deletions(-)

-- 
2.25.1