netdev - Re: [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface to p{5,6}

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230526130145.7wg75yoe6ut4na7g@skbuf>
Date: Fri, 26 May 2023 16:01:45 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>
Cc: Sean Wang <sean.wang@...iatek.com>,
	Landen Chao <Landen.Chao@...iatek.com>,
	DENG Qingfang <dqfext@...il.com>,
	Daniel Golle <daniel@...rotopia.org>, Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	Russell King <linux@...linux.org.uk>,
	Richard van Schagen <richard@...terhints.com>,
	Richard van Schagen <vschagen@...com>,
	Frank Wunderlich <frank-w@...lic-files.de>,
	Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
	erkin.bozoglu@...ont.com, mithat.guner@...ont.com,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface
 to p{5,6}_configured

On Thu, May 25, 2023 at 09:49:58AM +0300, Arınç ÜNAL wrote:
> On 24.05.2023 20:51, Vladimir Oltean wrote:
> > On Mon, May 22, 2023 at 03:15:10PM +0300, arinc9.unal@...il.com wrote:
> > > diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> > > index 710c6622d648..d837aa20968c 100644
> > > --- a/drivers/net/dsa/mt7530.c
> > > +++ b/drivers/net/dsa/mt7530.c
> > > @@ -2728,25 +2722,20 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> > >   			goto unsupported;
> > >   		break;
> > >   	case 5: /* Port 5, can be used as a CPU port. */
> > > -		if (priv->p5_interface == state->interface)
> > > +		if (priv->p5_configured)
> > >   			break;
> > >   		if (mt753x_mac_config(ds, port, mode, state) < 0)
> > >   			goto unsupported;
> > > -
> > > -		if (priv->p5_intf_sel != P5_DISABLED)
> > > -			priv->p5_interface = state->interface;
> > 
> > If you don't replace this bit with anything, who will set priv->p5_configured
> > for mt7530?
> 
> I intend priv->p5_configured and priv->p6_configured to be only used for
> MT7531 as I have stated on the mt7530_priv description.

Ok, but given the premise of this patch set, that phylink is always available,
does it make sense for mt7531_cpu_port_config() and mt7988_cpu_port_config()
to manually call phylink methods?