netdev - [PATCH net-next v4 4/7] net: dsa: mv88e6xxx: add field to specify internal phys layout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230529080246.82953-5-alexis.lothore@bootlin.com>
Date: Mon, 29 May 2023 10:02:43 +0200
From: Alexis Lothoré <alexis.lothore@...tlin.com>
To: Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Richard Cochran <richardcochran@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Russell King <linux@...linux.org.uk>
Cc: linux-kernel@...r.kernel.org ,
	netdev@...r.kernel.org ,
	devicetree@...r.kernel.org ,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
	paul.arola@...us.com ,
	scott.roberts@...us.com ,
	Marek Behún <kabel@...nel.org>,
	Alexis Lothoré <alexis.lothore@...tlin.com>
Subject: [PATCH net-next v4 4/7] net: dsa: mv88e6xxx: add field to specify internal phys layout

mv88e6xxx currently assumes that switch equipped with internal phys have
those phys mapped contiguously starting from port 0 (see
mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
integrated PHYs available on ports 1 to 8
To properly support this offset, add a new field to allow specifying an
internal PHYs layout. If field is not set, default layout is assumed (start
at port 0)

Signed-off-by: Alexis Lothoré <alexis.lothore@...tlin.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
Changes since v3:
- fix SoB
- add reviewed-by tag

Changes since v2:
- move start/end computation out of for-loop
- remove whitespace
---
 drivers/net/dsa/mv88e6xxx/chip.c    | 4 +++-
 drivers/net/dsa/mv88e6xxx/chip.h    | 5 +++++
 drivers/net/dsa/mv88e6xxx/global2.c | 5 ++++-
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 1b5a05f118b4..c967259fcadd 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -465,7 +465,9 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
 
 static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
 {
-	return port < chip->info->num_internal_phys;
+	return port >= chip->info->internal_phys_offset &&
+		port < chip->info->num_internal_phys +
+			chip->info->internal_phys_offset;
 }
 
 static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index da6e1339f809..eca51946c100 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -167,6 +167,11 @@ struct mv88e6xxx_info {
 
 	/* Supports PTP */
 	bool ptp_support;
+
+	/* Internal PHY start index. 0 means that internal PHYs range starts at
+	 * port 0, 1 means internal PHYs range starts at port 1, etc
+	 */
+	unsigned int internal_phys_offset;
 };
 
 struct mv88e6xxx_atu_entry {
diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c
index 615896893076..937a01f2ba75 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.c
+++ b/drivers/net/dsa/mv88e6xxx/global2.c
@@ -1196,9 +1196,12 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip)
 int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
 				struct mii_bus *bus)
 {
+	int phy_start = chip->info->internal_phys_offset;
+	int phy_end = chip->info->internal_phys_offset +
+		      chip->info->num_internal_phys;
 	int phy, irq;
 
-	for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
+	for (phy = phy_start; phy < phy_end; phy++) {
 		irq = irq_find_mapping(chip->g2_irq.domain, phy);
 		if (irq < 0)
 			return irq;
-- 
2.40.1