[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c3399327-37ee-f34c-4a48-7c1f1a62a785@linux.intel.com>
Date: Mon, 5 Jun 2023 11:10:39 +0300
From: Jarkko Nikula <jarkko.nikula@...ux.intel.com>
To: Jiawen Wu <jiawenwu@...stnetic.com>, netdev@...r.kernel.org,
andriy.shevchenko@...ux.intel.com, mika.westerberg@...ux.intel.com,
jsd@...ihalf.com, Jose.Abreu@...opsys.com, andrew@...n.ch,
hkallweit1@...il.com, linux@...linux.org.uk
Cc: linux-i2c@...r.kernel.org, linux-gpio@...r.kernel.org,
mengyuanlou@...-swift.com, Piotr Raczynski <piotr.raczynski@...el.com>
Subject: Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for
Wangxun 10Gb NIC
On 6/5/23 05:52, Jiawen Wu wrote:
> Wangxun 10Gb ethernet chip is connected to Designware I2C, to communicate
> with SFP.
>
> Introduce the property "wx,i2c-snps-model" to match device data for Wangxun
> in software node case. Since IO resource was mapped on the ethernet driver,
> add a model quirk to get regmap from parent device.
>
> The exists IP limitations are dealt as workarounds:
> - IP does not support interrupt mode, it works on polling mode.
> - Additionally set FIFO depth address the chip issue.
>
> Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
> Reviewed-by: Piotr Raczynski <piotr.raczynski@...el.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> ---
> drivers/i2c/busses/i2c-designware-common.c | 8 ++
> drivers/i2c/busses/i2c-designware-core.h | 4 +
> drivers/i2c/busses/i2c-designware-master.c | 89 +++++++++++++++++++--
> drivers/i2c/busses/i2c-designware-platdrv.c | 15 ++++
> 4 files changed, 111 insertions(+), 5 deletions(-)
>
Acked-by: Jarkko Nikula <jarkko.nikula@...ux.intel.com>
Powered by blists - more mailing lists