lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1q7Y9R-00DI8g-GF@rmk-PC.armlinux.org.uk>
Date: Fri, 09 Jun 2023 10:11:21 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Marcin Wojtas <mw@...ihalf.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: [PATCH RFC net-next 2/4] net: phylink: add EEE management

Add EEE management to phylink.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/phy/phylink.c | 82 ++++++++++++++++++++++++++++++++++++---
 include/linux/phylink.h   | 32 +++++++++++++++
 2 files changed, 109 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1ae7868d2137..d0abae91ceb5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -80,6 +80,9 @@ struct phylink {
 	DECLARE_PHY_INTERFACE_MASK(sfp_interfaces);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
 	u8 sfp_port;
+
+	struct eee_config eee_cfg;
+	bool eee_active;
 };
 
 #define phylink_printk(level, pl, fmt, ...) \
@@ -1253,6 +1256,24 @@ static const char *phylink_pause_to_str(int pause)
 	}
 }
 
+static void phylink_disable_tx_lpi(struct phylink *pl)
+{
+	if (pl->mac_ops->mac_disable_tx_lpi)
+		pl->mac_ops->mac_disable_tx_lpi(pl->config);
+}
+
+static void phylink_enable_tx_lpi(struct phylink *pl)
+{
+	if (pl->mac_ops->mac_enable_tx_lpi)
+		pl->mac_ops->mac_enable_tx_lpi(pl->config,
+					       pl->eee_cfg.tx_lpi_timer);
+}
+
+static bool phylink_eee_is_active(struct phylink *pl)
+{
+	return phylink_init_eee(pl, pl->config->eee_clk_stop_enable) >= 0;
+}
+
 static void phylink_link_up(struct phylink *pl,
 			    struct phylink_link_state link_state)
 {
@@ -1294,6 +1315,12 @@ static void phylink_link_up(struct phylink *pl,
 				 pl->cur_interface, speed, duplex,
 				 !!(link_state.pause & MLO_PAUSE_TX), rx_pause);
 
+	if (eeecfg_mac_can_tx_lpi(&pl->eee_cfg)) {
+		pl->eee_active = phylink_eee_is_active(pl);
+		if (pl->eee_active)
+			phylink_enable_tx_lpi(pl);
+	}
+
 	if (ndev)
 		netif_carrier_on(ndev);
 
@@ -1310,25 +1337,32 @@ static void phylink_link_down(struct phylink *pl)
 
 	if (ndev)
 		netif_carrier_off(ndev);
+
+	if (eeecfg_mac_can_tx_lpi(&pl->eee_cfg) && pl->eee_active) {
+		pl->eee_active = false;
+		phylink_disable_tx_lpi(pl);
+	}
+
 	pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode,
 				   pl->cur_interface);
 	phylink_info(pl, "Link is Down\n");
 }
 
+static bool phylink_link_is_up(struct phylink *pl)
+{
+	return pl->netdev ? netif_carrier_ok(pl->netdev) : pl->old_link_state;
+}
+
 static void phylink_resolve(struct work_struct *w)
 {
 	struct phylink *pl = container_of(w, struct phylink, resolve);
 	struct phylink_link_state link_state;
-	struct net_device *ndev = pl->netdev;
 	bool mac_config = false;
 	bool retrigger = false;
 	bool cur_link_state;
 
 	mutex_lock(&pl->state_mutex);
-	if (pl->netdev)
-		cur_link_state = netif_carrier_ok(ndev);
-	else
-		cur_link_state = pl->old_link_state;
+	cur_link_state = phylink_link_is_up(pl);
 
 	if (pl->phylink_disable_state) {
 		pl->mac_link_dropped = false;
@@ -1571,6 +1605,9 @@ struct phylink *phylink_create(struct phylink_config *config,
 	linkmode_copy(pl->link_config.advertising, pl->supported);
 	phylink_validate(pl, pl->supported, &pl->link_config);
 
+	/* Set the default EEE configuration */
+	pl->eee_cfg = pl->config->eee;
+
 	ret = phylink_parse_mode(pl, fwnode);
 	if (ret < 0) {
 		kfree(pl);
@@ -2589,6 +2626,12 @@ int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
 	if (pl->phydev)
 		ret = phy_ethtool_get_eee(pl->phydev, eee);
 
+	if (!ret) {
+		/* Overwrite phylib's interpretation of configuration */
+		eeecfg_to_eee(&pl->eee_cfg, eee);
+		eee->eee_active = pl->eee_active;
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
@@ -2607,6 +2650,35 @@ int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
 	if (pl->phydev)
 		ret = phy_ethtool_set_eee(pl->phydev, eee);
 
+	if (!ret) {
+		bool can_lpi, old_can_lpi;
+
+		mutex_lock(&pl->state_mutex);
+		old_can_lpi = eeecfg_mac_can_tx_lpi(&pl->eee_cfg);
+		eee_to_eeecfg(eee, &pl->eee_cfg);
+		can_lpi = eeecfg_mac_can_tx_lpi(&pl->eee_cfg);
+
+		/* IF the link is up, and the configuration changes the
+		 * LPI permissive state, deal with the change at the MAC.
+		 */
+		if (phylink_link_is_up(pl) && old_can_lpi != can_lpi) {
+			if (can_lpi) {
+				/* If LPI wasn't enabled, eee_active (result
+				 * of any AN) will be false. Update it here.
+				 * If the advertisement has been changed, the
+				 * link will cycle which will update this.
+				 */
+				pl->eee_active = phylink_eee_is_active(pl);
+				if (pl->eee_active)
+					phylink_enable_tx_lpi(pl);
+			} else {
+				phylink_disable_tx_lpi(pl);
+			}
+		}
+
+		mutex_unlock(&pl->state_mutex);
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 0cf07d7d11b8..6328a9f481ee 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -5,6 +5,8 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 
+#include <net/eee.h>
+
 struct device_node;
 struct ethtool_cmd;
 struct fwnode_handle;
@@ -122,11 +124,13 @@ enum phylink_op_type {
  *		      if MAC link is at %MLO_AN_FIXED mode.
  * @mac_managed_pm: if true, indicate the MAC driver is responsible for PHY PM.
  * @ovr_an_inband: if true, override PCS to MLO_AN_INBAND
+ * @eee_clk_stop_enable: if true, PHY can stop the receive clock during LPI
  * @get_fixed_state: callback to execute to determine the fixed link state,
  *		     if MAC link is at %MLO_AN_FIXED mode.
  * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx
  *                        are supported by the MAC/PCS.
  * @mac_capabilities: MAC pause/speed/duplex capabilities.
+ * @eee: default EEE configuration.
  */
 struct phylink_config {
 	struct device *dev;
@@ -135,10 +139,12 @@ struct phylink_config {
 	bool poll_fixed_state;
 	bool mac_managed_pm;
 	bool ovr_an_inband;
+	bool eee_clk_stop_enable;
 	void (*get_fixed_state)(struct phylink_config *config,
 				struct phylink_link_state *state);
 	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
 	unsigned long mac_capabilities;
+	struct eee_config eee;
 };
 
 /**
@@ -152,6 +158,8 @@ struct phylink_config {
  * @mac_an_restart: restart 802.3z BaseX autonegotiation.
  * @mac_link_down: take the link down.
  * @mac_link_up: allow the link to come up.
+ * @mac_disable_tx_lpi: disable LPI.
+ * @mac_enable_tx_lpi: enable and configure LPI.
  *
  * The individual methods are described more fully below.
  */
@@ -176,6 +184,8 @@ struct phylink_mac_ops {
 			    struct phy_device *phy, unsigned int mode,
 			    phy_interface_t interface, int speed, int duplex,
 			    bool tx_pause, bool rx_pause);
+	void (*mac_disable_tx_lpi)(struct phylink_config *config);
+	void (*mac_enable_tx_lpi)(struct phylink_config *config, u32 timer);
 };
 
 #if 0 /* For kernel-doc purposes only. */
@@ -429,6 +439,28 @@ void mac_link_down(struct phylink_config *config, unsigned int mode,
 void mac_link_up(struct phylink_config *config, struct phy_device *phy,
 		 unsigned int mode, phy_interface_t interface,
 		 int speed, int duplex, bool tx_pause, bool rx_pause);
+
+/**
+ * mac_disable_tx_lpi() - disable LPI generation at the MAC
+ * @config: a pointer to a &struct phylink_config.
+ *
+ * Disable generation of LPI at the MAC, effectively preventing the MAC
+ * from indicating that it is idle.
+ */
+void mac_disable_tx_lpi(struct phylink_config *config);
+
+/**
+ * mac_enable_tx_lpi() - configure and enable LPI generation at the MAC
+ * @config: a pointer to a &struct phylink_config.
+ * @timer: LPI timeout in microseconds.
+ *
+ * Configure the LPI timeout accordingly. This will only be called when
+ * the link is already up, to cater for situations where the hardware
+ * needs to be programmed according to the link speed.
+ *
+ * Enable LPI generation at the MAC.
+ */
+void mac_enable_tx_lpi(struct phylink_config *config, u32 timer);
 #endif
 
 struct phylink_pcs_ops;
-- 
2.30.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ