| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 9 Jun 2023 17:46:59 +0800
From: renmingshuai <renmingshuai@...wei.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<jhs@...atatu.com>, <xiyou.wangcong@...il.com>, <jiri@...nulli.us>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>
CC: <liaichun@...wei.com>, <caowangbao@...wei.com>, <yanan@...wei.com>,
<liubo335@...wei.com>
Subject: [PATCH v2] net/sched: Set the flushing flags to false to prevent an infinite loop and add one test to tdc
When a new chain is added by using tc, one soft lockup alarm will be
generated after delete the prio 0 filter of the chain. To reproduce
the problem, perform the following steps:
(1) tc qdisc add dev eth0 root handle 1: htb default 1
(2) tc chain add dev eth0
(3) tc filter del dev eth0 chain 0 parent 1: prio 0
(4) tc filter add dev eth0 chain 0 parent 1:
The refcnt of the chain added by step 2 is equal to 1. After step 3,
the flushing flag of the chain is set to true in the tcf_chain_flush()
called by tc_del_tfilter() because the prio is 0. In this case, if
we add a new filter to this chain, it will never succeed and try again
and again because the refresh flash is always true and refcnt is 1.
A soft lock alarm is generated 20 seconds later.
The stack is show as below:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 2 PID: 3321861 Comm: tc Kdump: loaded Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack+0x57/0x6e
panic+0x196/0x3ec
watchdog_timer_fn.cold+0x16/0x5c
__run_hrtimer+0x5e/0x190
__hrtimer_run_queues+0x8a/0xe0
hrtimer_interrupt+0x110/0x2c0
? irqtime_account_irq+0x49/0xf0
__sysvec_apic_timer_interrupt+0x5f/0xe0
asm_call_irq_on_stack+0x12/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x72/0x80
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:mutex_lock+0x24/0x70
RSP: 0018:ffffa836004ab9a8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff95bb02d76700 RCX: 0000000000000000
RDX: ffff95bb27462100 RSI: 0000000000000000 RDI: ffff95ba5b527000
RBP: ffff95ba5b527000 R08: 0000000000000001 R09: ffffa836004abbb8
R10: 000000000000000f R11: 0000000000000000 R12: 0000000000000000
R13: ffff95ba5b527000 R14: ffffa836004abbb8 R15: 0000000000000001
__tcf_chain_put+0x27/0x200
tc_new_tfilter+0x5e8/0x810
? tc_setup_cb_add+0x210/0x210
rtnetlink_rcv_msg+0x2e3/0x380
? rtnl_calcit.isra.0+0x120/0x120
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x12d/0x1d0
netlink_sendmsg+0x286/0x490
sock_sendmsg+0x62/0x70
____sys_sendmsg+0x24c/0x2c0
? import_iovec+0x17/0x20
? sendmsg_copy_msghdr+0x80/0xa0
___sys_sendmsg+0x75/0xc0
? do_fault_around+0x118/0x160
? do_read_fault+0x68/0xf0
? __handle_mm_fault+0x3f9/0x6f0
__sys_sendmsg+0x59/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
RIP: 0033:0x7f96705b8247
RSP: 002b:00007ffe552e9dc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96705b8247
RDX: 0000000000000000 RSI: 00007ffe552e9e40 RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000558113f678b0
R10: 00007f967069ab00 R11: 0000000000000246 R12: 00000000647ea089
R13: 00007ffe552e9f30 R14: 0000000000000001 R15: 0000558113175f00
To avoid this case, set chain->flushing to be false if the chain->refcnt
is 2 after flushing the chain when prio is 0. I also add one test to tdc.
Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush")
Signed-off-by: Mingshuai Ren <renmingshuai@...wei.com>
Reviewed-by: Aichun Li <Liaichun@...wei.com>
---
V1 -> V2:
* Correct the judgment on the value chain->refcnt and add one test to tdc
---
net/sched/cls_api.c | 7 ++++++
.../tc-testing/tc-tests/infra/filter.json | 25 +++++++++++++++++++
2 files changed, 32 insertions(+)
create mode 100644 tools/testing/selftests/tc-testing/tc-tests/infra/filter.json
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 2621550bfddc..3ea054e03fbf 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -2442,6 +2442,13 @@ static int tc_del_tfilter(struct sk_buff *skb, struct nlmsghdr *n,
tfilter_notify_chain(net, skb, block, q, parent, n,
chain, RTM_DELTFILTER, extack);
tcf_chain_flush(chain, rtnl_held);
+ /* Set the flushing flags to false to prevent an infinite loop
+ * when a new filter is added.
+ */
+ mutex_lock(&chain->filter_chain_lock);
+ if (chain->refcnt == 2)
+ chain->flushing = false;
+ mutex_unlock(&chain->filter_chain_lock);
err = 0;
goto errout;
}
diff --git a/tools/testing/selftests/tc-testing/tc-tests/infra/filter.json b/tools/testing/selftests/tc-testing/tc-tests/infra/filter.json
new file mode 100644
index 000000000000..db3b42aaa4fa
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/infra/filter.json
@@ -0,0 +1,25 @@
+[
+ {
+ "id": "c2b4",
+ "name": "Adding a new filter after flushing empty chain doesn't cause an infinite loop",
+ "category": [
+ "filter",
+ "chain"
+ ],
+ "setup": [
+ "$IP link add dev $DUMMY type dummy || /bin/true",
+ "$TC qdisc add dev $DUMMY root handle 1: htb default 1",
+ "$TC chain add dev $DUMMY",
+ "$TC filter del dev $DUMMY chain 0 parent 1: prio 0"
+ ],
+ "cmdUnderTest": "$TC filter add dev $DUMMY chain 0 parent 1:",
+ "expExitCode": "2",
+ "verifyCmd": "$TC chain ls dev $DUMMY",
+ "matchPattern": "chain parent 1: chain 0",
+ "matchCount": "1",
+ "teardown": [
+ "$TC qdisc del dev $DUMMY root handle 1: htb default 1",
+ "$IP link del dev $DUMMY type dummy"
+ ]
+ }
+]
--
2.27.0
Powered by blists - more mailing lists