lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZIRI+/YDZMQJVs3i@nanopsycho>
Date: Sat, 10 Jun 2023 11:57:15 +0200
From: Jiri Pirko <jiri@...nulli.us>
To: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Cc: kuba@...nel.org, vadfed@...a.com, jonathan.lemon@...il.com,
	pabeni@...hat.com, corbet@....net, davem@...emloft.net,
	edumazet@...gle.com, vadfed@...com, jesse.brandeburg@...el.com,
	anthony.l.nguyen@...el.com, saeedm@...dia.com, leon@...nel.org,
	richardcochran@...il.com, sj@...nel.org, javierm@...hat.com,
	ricardo.canuelo@...labora.com, mst@...hat.com, tzimmermann@...e.de,
	michal.michalik@...el.com, gregkh@...uxfoundation.org,
	jacek.lawrynowicz@...ux.intel.com, airlied@...hat.com,
	ogabbay@...nel.org, arnd@...db.de, nipun.gupta@....com,
	axboe@...nel.dk, linux@...y.sk, masahiroy@...nel.org,
	benjamin.tissoires@...hat.com, geert+renesas@...der.be,
	milena.olech@...el.com, kuniyu@...zon.com, liuhangbin@...il.com,
	hkallweit1@...il.com, andy.ren@...cruise.com, razor@...ckwall.org,
	idosch@...dia.com, lucien.xin@...il.com, nicolas.dichtel@...nd.com,
	phil@....cc, claudiajkang@...il.com, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	intel-wired-lan@...ts.osuosl.org, linux-rdma@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, poros@...hat.com,
	mschmidt@...hat.com, linux-clk@...r.kernel.org,
	vadim.fedorenko@...ux.dev
Subject: Re: [RFC PATCH v8 08/10] ice: implement dpll interface to control cgu

Fri, Jun 09, 2023 at 02:18:51PM CEST, arkadiusz.kubalewski@...el.com wrote:
>Control over clock generation unit is required for further development
>of Synchronous Ethernet feature. Interface provides ability to obtain
>current state of a dpll, its sources and outputs which are pins, and
>allows their configuration.
>
>Co-developed-by: Milena Olech <milena.olech@...el.com>
>Signed-off-by: Milena Olech <milena.olech@...el.com>
>Co-developed-by: Michal Michalik <michal.michalik@...el.com>
>Signed-off-by: Michal Michalik <michal.michalik@...el.com>
>Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
>---
> drivers/net/ethernet/intel/Kconfig        |    1 +
> drivers/net/ethernet/intel/ice/Makefile   |    3 +-
> drivers/net/ethernet/intel/ice/ice.h      |    4 +
> drivers/net/ethernet/intel/ice/ice_dpll.c | 2015 +++++++++++++++++++++
> drivers/net/ethernet/intel/ice/ice_dpll.h |  102 ++
> drivers/net/ethernet/intel/ice/ice_main.c |    7 +
> 6 files changed, 2131 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ethernet/intel/ice/ice_dpll.c
> create mode 100644 drivers/net/ethernet/intel/ice/ice_dpll.h
>
>diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
>index 9bc0a9519899..913dcf928d15 100644
>--- a/drivers/net/ethernet/intel/Kconfig
>+++ b/drivers/net/ethernet/intel/Kconfig
>@@ -284,6 +284,7 @@ config ICE
> 	select DIMLIB
> 	select NET_DEVLINK
> 	select PLDMFW
>+	select DPLL
> 	help
> 	  This driver supports Intel(R) Ethernet Connection E800 Series of
> 	  devices.  For more information on how to identify your adapter, go
>diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
>index 817977e3039d..85d6366d1f5b 100644
>--- a/drivers/net/ethernet/intel/ice/Makefile
>+++ b/drivers/net/ethernet/intel/ice/Makefile
>@@ -34,7 +34,8 @@ ice-y := ice_main.o	\
> 	 ice_lag.o	\
> 	 ice_ethtool.o  \
> 	 ice_repr.o	\
>-	 ice_tc_lib.o
>+	 ice_tc_lib.o	\
>+	 ice_dpll.o
> ice-$(CONFIG_PCI_IOV) +=	\
> 	ice_sriov.o		\
> 	ice_virtchnl.o		\
>diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
>index ae58d7499955..8a110272a799 100644
>--- a/drivers/net/ethernet/intel/ice/ice.h
>+++ b/drivers/net/ethernet/intel/ice/ice.h
>@@ -76,6 +76,7 @@
> #include "ice_vsi_vlan_ops.h"
> #include "ice_gnss.h"
> #include "ice_irq.h"
>+#include "ice_dpll.h"
> 
> #define ICE_BAR0		0
> #define ICE_REQ_DESC_MULTIPLE	32
>@@ -198,6 +199,7 @@
> enum ice_feature {
> 	ICE_F_DSCP,
> 	ICE_F_PTP_EXTTS,
>+	ICE_F_PHY_RCLK,
> 	ICE_F_SMA_CTRL,
> 	ICE_F_CGU,
> 	ICE_F_GNSS,
>@@ -506,6 +508,7 @@ enum ice_pf_flags {
> 	ICE_FLAG_UNPLUG_AUX_DEV,
> 	ICE_FLAG_MTU_CHANGED,
> 	ICE_FLAG_GNSS,			/* GNSS successfully initialized */
>+	ICE_FLAG_DPLL,			/* SyncE/PTP dplls initialized */
> 	ICE_PF_FLAGS_NBITS		/* must be last */
> };
> 
>@@ -628,6 +631,7 @@ struct ice_pf {
> #define ICE_VF_AGG_NODE_ID_START	65
> #define ICE_MAX_VF_AGG_NODES		32
> 	struct ice_agg_node vf_agg_node[ICE_MAX_VF_AGG_NODES];
>+	struct ice_dplls dplls;
> };
> 
> struct ice_netdev_priv {
>diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c
>new file mode 100644
>index 000000000000..22a69197188a
>--- /dev/null
>+++ b/drivers/net/ethernet/intel/ice/ice_dpll.c
>@@ -0,0 +1,2015 @@
>+// SPDX-License-Identifier: GPL-2.0
>+/* Copyright (C) 2022, Intel Corporation. */
>+
>+#include "ice.h"
>+#include "ice_lib.h"
>+#include "ice_trace.h"
>+#include <linux/dpll.h>
>+
>+#define ICE_CGU_STATE_ACQ_ERR_THRESHOLD		50
>+#define ICE_DPLL_LOCK_TRIES			1000
>+#define ICE_DPLL_PIN_IDX_INVALID		0xff
>+#define ICE_DPLL_RCLK_NUM_PER_PF		1
>+
>+/**
>+ * dpll_lock_status - map ice cgu states into dpll's subsystem lock status
>+ */
>+static const enum dpll_lock_status
>+ice_dpll_status[__DPLL_LOCK_STATUS_MAX] = {
>+	[ICE_CGU_STATE_INVALID] = 0,

It's already 0, drop this pointless assign.


>+	[ICE_CGU_STATE_FREERUN] = DPLL_LOCK_STATUS_UNLOCKED,
>+	[ICE_CGU_STATE_LOCKED] = DPLL_LOCK_STATUS_LOCKED,
>+	[ICE_CGU_STATE_LOCKED_HO_ACQ] = DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
>+	[ICE_CGU_STATE_HOLDOVER] = DPLL_LOCK_STATUS_HOLDOVER,
>+};
>+
>+/**
>+ * ice_dpll_pin_type - enumerate ice pin types
>+ */
>+enum ice_dpll_pin_type {
>+	ICE_DPLL_PIN_INVALID = 0,

Not needed to set 0 here, it is implicit.


>+	ICE_DPLL_PIN_TYPE_INPUT,
>+	ICE_DPLL_PIN_TYPE_OUTPUT,
>+	ICE_DPLL_PIN_TYPE_RCLK_INPUT,
>+};
>+
>+/**
>+ * pin_type_name - string names of ice pin types
>+ */
>+static const char * const pin_type_name[] = {
>+	[ICE_DPLL_PIN_TYPE_INPUT] = "input",
>+	[ICE_DPLL_PIN_TYPE_OUTPUT] = "output",
>+	[ICE_DPLL_PIN_TYPE_RCLK_INPUT] = "rclk-input",
>+};
>+
>+/**
>+ * ice_dpll_cb_lock - lock dplls mutex in callback context
>+ * @pf: private board structure
>+ *
>+ * Lock the mutex from the callback operations invoked by dpll subsystem.
>+ * Prevent dead lock caused by `rmmod ice` when dpll callbacks are under stress

"dead lock", really? Which one? Didn't you want to write "livelock"?

If this is livelock prevention, is this something you really see or
just an assumption? Seems to me unlikely.

Plus, see my note in ice_dpll_init(). If you remove taking the lock from
ice_dpll_init() and ice_dpll_deinit(), do you still need this? I don't
think so.


>+ * tests.
>+ *
>+ * Return:
>+ * 0 - if lock acquired
>+ * negative - lock not acquired or dpll was deinitialized
>+ */
>+static int ice_dpll_cb_lock(struct ice_pf *pf)
>+{
>+	int i;
>+
>+	for (i = 0; i < ICE_DPLL_LOCK_TRIES; i++) {
>+		if (mutex_trylock(&pf->dplls.lock))
>+			return 0;
>+		usleep_range(100, 150);
>+		if (!test_bit(ICE_FLAG_DPLL, pf->flags))

How exactly could this happen? I don't think it can. Drop it.


>+			return -EFAULT;
>+	}
>+
>+	return -EBUSY;
>+}
>+
>+/**
>+ * ice_dpll_cb_unlock - unlock dplls mutex in callback context
>+ * @pf: private board structure
>+ *
>+ * Unlock the mutex from the callback operations invoked by dpll subsystem.
>+ */
>+static void ice_dpll_cb_unlock(struct ice_pf *pf)
>+{
>+	mutex_unlock(&pf->dplls.lock);
>+}
>+
>+/**
>+ * ice_dpll_pin_freq_set - set pin's frequency
>+ * @pf: private board structure
>+ * @pin: pointer to a pin
>+ * @pin_type: type of pin being configured
>+ * @freq: frequency to be set
>+ *
>+ * Set requested frequency on a pin.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error on AQ or wrong pin type given
>+ */
>+static int
>+ice_dpll_pin_freq_set(struct ice_pf *pf, struct ice_dpll_pin *pin,
>+		      enum ice_dpll_pin_type pin_type, const u32 freq)
>+{
>+	int ret = -EINVAL;
>+	u8 flags;
>+
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+		flags = ICE_AQC_SET_CGU_IN_CFG_FLG1_UPDATE_FREQ;
>+		ret = ice_aq_set_input_pin_cfg(&pf->hw, pin->idx, flags,
>+					       pin->flags[0], freq, 0);
>+		break;
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		flags = ICE_AQC_SET_CGU_OUT_CFG_UPDATE_FREQ;
>+		ret = ice_aq_set_output_pin_cfg(&pf->hw, pin->idx, flags,
>+						0, freq, 0);
>+		break;
>+	default:
>+		break;
>+	}
>+	if (ret) {
>+		dev_err(ice_pf_to_dev(pf),
>+			"err:%d %s failed to set pin freq:%u on pin:%u\n",
>+			ret, ice_aq_str(pf->hw.adminq.sq_last_status),
>+			freq, pin->idx);

Why you need dev_err here? Why can't this be rather put to the extack
message? Much better. Try to avoid polluting dmesg.


>+		return ret;
>+	}
>+	pin->freq = freq;
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_frequency_set - wrapper for pin callback for set frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: frequency to be set
>+ * @extack: error reporting
>+ * @pin_type: type of pin being configured
>+ *
>+ * Wraps internal set frequency command on a pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't set in hw
>+ */
>+static int
>+ice_dpll_frequency_set(const struct dpll_pin *pin, void *pin_priv,
>+		       const struct dpll_device *dpll, void *dpll_priv,
>+		       const u32 frequency,
>+		       struct netlink_ext_ack *extack,
>+		       enum ice_dpll_pin_type pin_type)
>+{
>+	struct ice_pf *pf = ((struct ice_dpll *)dpll_priv)->pf;

Rather do:
	struct ice_dpll *dpll = dpll_priv;
	struct ice_pf *pf = dpll->pf;
And avoid the cast. Easier to read as well.
Same on other places.


>+	struct ice_dpll_pin *p = pin_priv;
>+	int ret = -EINVAL;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	ret = ice_dpll_pin_freq_set(pf, p, pin_type, frequency);
>+	ice_dpll_cb_unlock(pf);
>+	if (ret)
>+		NL_SET_ERR_MSG(extack, "frequency was not set");

Yeah, that is stating the obvious as the use got error value, but tell
him some other details. Fill this in ice_dpll_pin_freq_set() by the
message you have there for dev_err() instead.



>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_input_frequency_set - input pin callback for set frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: frequency to be set
>+ * @extack: error reporting
>+ *
>+ * Wraps internal set frequency command on a pin.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't set in hw
>+ */
>+static int
>+ice_dpll_input_frequency_set(const struct dpll_pin *pin, void *pin_priv,
>+			     const struct dpll_device *dpll, void *dpll_priv,
>+			     u64 frequency, struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_frequency_set(pin, pin_priv, dpll, dpll_priv, frequency,
>+				      extack, ICE_DPLL_PIN_TYPE_INPUT);
>+}
>+
>+/**
>+ * ice_dpll_output_frequency_set - output pin callback for set frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: frequency to be set
>+ * @extack: error reporting
>+ *
>+ * Wraps internal set frequency command on a pin.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't set in hw
>+ */
>+static int
>+ice_dpll_output_frequency_set(const struct dpll_pin *pin, void *pin_priv,
>+			      const struct dpll_device *dpll, void *dpll_priv,
>+			      u64 frequency, struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_frequency_set(pin, pin_priv, dpll, dpll_priv, frequency,
>+				      extack, ICE_DPLL_PIN_TYPE_OUTPUT);
>+}
>+
>+/**
>+ * ice_dpll_frequency_get - wrapper for pin callback for get frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: on success holds pin's frequency
>+ * @extack: error reporting
>+ * @pin_type: type of pin being configured
>+ *
>+ * Wraps internal get frequency command of a pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't get from hw
>+ */
>+static int
>+ice_dpll_frequency_get(const struct dpll_pin *pin, void *pin_priv,
>+		       const struct dpll_device *dpll, void *dpll_priv,
>+		       u64 *frequency, struct netlink_ext_ack *extack,
>+		       enum ice_dpll_pin_type pin_type)
>+{
>+	struct ice_pf *pf = ((struct ice_dpll *)dpll_priv)->pf;
>+	struct ice_dpll_pin *p = pin_priv;
>+	int ret = -EINVAL;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	*frequency = p->freq;
>+	ice_dpll_cb_unlock(pf);
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_input_frequency_get - input pin callback for get frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: on success holds pin's frequency
>+ * @extack: error reporting
>+ *
>+ * Wraps internal get frequency command of a input pin.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't get from hw
>+ */
>+static int
>+ice_dpll_input_frequency_get(const struct dpll_pin *pin, void *pin_priv,
>+			     const struct dpll_device *dpll, void *dpll_priv,
>+			     u64 *frequency, struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_frequency_get(pin, pin_priv, dpll, dpll_priv, frequency,
>+				      extack, ICE_DPLL_PIN_TYPE_INPUT);
>+}
>+
>+/**
>+ * ice_dpll_output_frequency_get - output pin callback for get frequency
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: pointer to dpll
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @frequency: on success holds pin's frequency
>+ * @extack: error reporting
>+ *
>+ * Wraps internal get frequency command of a pin.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - error pin not found or couldn't get from hw
>+ */
>+static int
>+ice_dpll_output_frequency_get(const struct dpll_pin *pin, void *pin_priv,
>+			      const struct dpll_device *dpll, void *dpll_priv,
>+			      u64 *frequency, struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_frequency_get(pin, pin_priv, dpll, dpll_priv, frequency,
>+				      extack, ICE_DPLL_PIN_TYPE_OUTPUT);
>+}
>+
>+/**
>+ * ice_dpll_pin_enable - enable a pin on dplls
>+ * @hw: board private hw structure
>+ * @pin: pointer to a pin
>+ * @pin_type: type of pin being enabled
>+ *
>+ * Enable a pin on both dplls. Store current state in pin->flags.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - OK
>+ * * negative - error
>+ */
>+static int
>+ice_dpll_pin_enable(struct ice_hw *hw, struct ice_dpll_pin *pin,
>+		    enum ice_dpll_pin_type pin_type)
>+{
>+	int ret = -EINVAL;
>+	u8 flags = 0;
>+
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+		if (pin->flags[0] & ICE_AQC_GET_CGU_IN_CFG_FLG2_ESYNC_EN)
>+			flags |= ICE_AQC_SET_CGU_IN_CFG_FLG2_ESYNC_EN;
>+		flags |= ICE_AQC_SET_CGU_IN_CFG_FLG2_INPUT_EN;
>+		ret = ice_aq_set_input_pin_cfg(hw, pin->idx, 0, flags, 0, 0);
>+		break;
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		if (pin->flags[0] & ICE_AQC_GET_CGU_OUT_CFG_ESYNC_EN)
>+			flags |= ICE_AQC_SET_CGU_OUT_CFG_ESYNC_EN;
>+		flags |= ICE_AQC_SET_CGU_OUT_CFG_OUT_EN;
>+		ret = ice_aq_set_output_pin_cfg(hw, pin->idx, flags, 0, 0, 0);
>+		break;
>+	default:
>+		break;
>+	}
>+	if (ret)
>+		dev_err(ice_pf_to_dev((struct ice_pf *)(hw->back)),
>+			"err:%d %s failed to enable %s pin:%u\n",
>+			ret, ice_aq_str(hw->adminq.sq_last_status),
>+			pin_type_name[pin_type], pin->idx);
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_pin_disable - disable a pin on dplls
>+ * @hw: board private hw structure
>+ * @pin: pointer to a pin
>+ * @pin_type: type of pin being disabled
>+ *
>+ * Disable a pin on both dplls. Store current state in pin->flags.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - OK
>+ * * negative - error
>+ */
>+static int
>+ice_dpll_pin_disable(struct ice_hw *hw, struct ice_dpll_pin *pin,
>+		     enum ice_dpll_pin_type pin_type)
>+{
>+	int ret = -EINVAL;
>+	u8 flags = 0;
>+
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+		if (pin->flags[0] & ICE_AQC_GET_CGU_IN_CFG_FLG2_ESYNC_EN)
>+			flags |= ICE_AQC_SET_CGU_IN_CFG_FLG2_ESYNC_EN;
>+		ret = ice_aq_set_input_pin_cfg(hw, pin->idx, 0, flags, 0, 0);
>+		break;
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		if (pin->flags[0] & ICE_AQC_GET_CGU_OUT_CFG_ESYNC_EN)
>+			flags |= ICE_AQC_SET_CGU_OUT_CFG_ESYNC_EN;
>+		ret = ice_aq_set_output_pin_cfg(hw, pin->idx, flags, 0, 0, 0);
>+		break;
>+	default:
>+		break;
>+	}
>+	if (ret)
>+		dev_err(ice_pf_to_dev((struct ice_pf *)(hw->back)),
>+			"err:%d %s failed to disable %s pin:%u\n",
>+			ret, ice_aq_str(hw->adminq.sq_last_status),
>+			pin_type_name[pin_type], pin->idx);
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_pin_state_update - update pin's state
>+ * @hw: private board struct
>+ * @pin: structure with pin attributes to be updated
>+ * @pin_type: type of pin being updated
>+ *
>+ * Determine pin current state and frequency, then update struct
>+ * holding the pin info. For input pin states are separated for each
>+ * dpll, for rclk pins states are separated for each parent.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - OK
>+ * * negative - error
>+ */
>+int
>+ice_dpll_pin_state_update(struct ice_pf *pf, struct ice_dpll_pin *pin,
>+			  enum ice_dpll_pin_type pin_type)
>+{
>+	int ret = -EINVAL;
>+
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+		ret = ice_aq_get_input_pin_cfg(&pf->hw, pin->idx, NULL, NULL,
>+					       NULL, &pin->flags[0],
>+					       &pin->freq, NULL);
>+		if (ICE_AQC_GET_CGU_IN_CFG_FLG2_INPUT_EN & pin->flags[0]) {
>+			if (pin->pin) {
>+				pin->state[pf->dplls.eec.dpll_idx] =
>+					pin->pin == pf->dplls.eec.active_input ?
>+					DPLL_PIN_STATE_CONNECTED :
>+					DPLL_PIN_STATE_SELECTABLE;
>+				pin->state[pf->dplls.pps.dpll_idx] =
>+					pin->pin == pf->dplls.pps.active_input ?
>+					DPLL_PIN_STATE_CONNECTED :
>+					DPLL_PIN_STATE_SELECTABLE;
>+			} else {
>+				pin->state[pf->dplls.eec.dpll_idx] =
>+					DPLL_PIN_STATE_SELECTABLE;
>+				pin->state[pf->dplls.pps.dpll_idx] =
>+					DPLL_PIN_STATE_SELECTABLE;
>+			}
>+		} else {
>+			pin->state[pf->dplls.eec.dpll_idx] =
>+				DPLL_PIN_STATE_DISCONNECTED;
>+			pin->state[pf->dplls.pps.dpll_idx] =
>+				DPLL_PIN_STATE_DISCONNECTED;
>+		}
>+		break;
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		ret = ice_aq_get_output_pin_cfg(&pf->hw, pin->idx,
>+						&pin->flags[0], NULL,
>+						&pin->freq, NULL);
>+		if (ICE_AQC_SET_CGU_OUT_CFG_OUT_EN & pin->flags[0])
>+			pin->state[0] = DPLL_PIN_STATE_CONNECTED;
>+		else
>+			pin->state[0] = DPLL_PIN_STATE_DISCONNECTED;
>+		break;
>+	case ICE_DPLL_PIN_TYPE_RCLK_INPUT:
>+		u8 parent, port_num = ICE_AQC_SET_PHY_REC_CLK_OUT_CURR_PORT;
>+
>+		for (parent = 0; parent < pf->dplls.rclk.num_parents;
>+		     parent++) {
>+			ret = ice_aq_get_phy_rec_clk_out(&pf->hw, parent,
>+							 &port_num,
>+							 &pin->flags[parent],
>+							 &pin->freq);
>+			if (ret)
>+				return ret;
>+			if (ICE_AQC_GET_PHY_REC_CLK_OUT_OUT_EN &
>+			    pin->flags[parent])
>+				pin->state[parent] = DPLL_PIN_STATE_CONNECTED;
>+			else
>+				pin->state[parent] =
>+					DPLL_PIN_STATE_DISCONNECTED;
>+		}
>+		break;
>+	default:
>+		break;
>+	}
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_find_dpll - find ice_dpll on a pf
>+ * @pf: private board structure
>+ * @dpll: kernel's dpll_device pointer to be searched
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * pointer if ice_dpll with given device dpll pointer is found
>+ * * NULL if not found
>+ */
>+static struct ice_dpll
>+*ice_find_dpll(struct ice_pf *pf, const struct dpll_device *dpll)
>+{
>+	if (!pf || !dpll)
>+		return NULL;
>+
>+	return dpll == pf->dplls.eec.dpll ? &pf->dplls.eec :
>+	       dpll == pf->dplls.pps.dpll ? &pf->dplls.pps : NULL;
>+}
>+
>+/**
>+ * ice_dpll_hw_input_prio_set - set input priority value in hardware
>+ * @pf: board private structure
>+ * @dpll: ice dpll pointer
>+ * @pin: ice pin pointer
>+ * @prio: priority value being set on a dpll
>+ *
>+ * Internal wrapper for setting the priority in the hardware.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int
>+ice_dpll_hw_input_prio_set(struct ice_pf *pf, struct ice_dpll *dpll,
>+			   struct ice_dpll_pin *pin, const u32 prio)
>+{
>+	int ret;
>+
>+	ret = ice_aq_set_cgu_ref_prio(&pf->hw, dpll->dpll_idx, pin->idx,
>+				      (u8)prio);
>+	if (ret)
>+		dev_err(ice_pf_to_dev(pf),
>+			"err:%d %s failed to set pin prio:%u on pin:%u\n",
>+			ret, ice_aq_str(pf->hw.adminq.sq_last_status),
>+			prio, pin->idx);
>+	else
>+		dpll->input_prio[pin->idx] = prio;
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_lock_status_get - get dpll lock status callback
>+ * @dpll: registered dpll pointer
>+ * @status: on success holds dpll's lock status
>+ *
>+ * Dpll subsystem callback, provides dpll's lock status.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int ice_dpll_lock_status_get(const struct dpll_device *dpll, void *priv,
>+				    enum dpll_lock_status *status,
>+				    struct netlink_ext_ack *extack)
>+{
>+	struct ice_dpll *d = priv;
>+	struct ice_pf *pf = d->pf;
>+	int ret = -EINVAL;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	*status = ice_dpll_status[d->dpll_state];
>+	ice_dpll_cb_unlock(pf);
>+	dev_dbg(ice_pf_to_dev(pf), "%s: dpll:%p, pf:%p, ret:%d\n", __func__,
>+		dpll, pf, ret);
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_mode_get - get dpll's working mode
>+ * @dpll: registered dpll pointer
>+ * @priv: private data pointer passed on dpll registration
>+ * @mode: on success holds current working mode of dpll
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Provides working mode of dpll.
>+ *
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int ice_dpll_mode_get(const struct dpll_device *dpll, void *priv,
>+			     enum dpll_mode *mode,
>+			     struct netlink_ext_ack *extack)
>+{
>+	*mode = DPLL_MODE_AUTOMATIC;
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_mode_get - check if dpll's working mode is supported
>+ * @dpll: registered dpll pointer
>+ * @priv: private data pointer passed on dpll registration
>+ * @mode: mode to be checked for support
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Provides information if working mode is supported
>+ * by dpll.
>+ *
>+ * Return:
>+ * * true - mode is supported
>+ * * false - mode is not supported
>+ */
>+static bool ice_dpll_mode_supported(const struct dpll_device *dpll, void *priv,
>+				    enum dpll_mode mode,
>+				    struct netlink_ext_ack *extack)
>+{
>+	if (mode == DPLL_MODE_AUTOMATIC)
>+		return true;
>+
>+	return false;
>+}
>+
>+/**
>+ * ice_dpll_pin_state_set - set pin's state on dpll
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: state of pin to be set
>+ * @extack: error reporting
>+ * @pin_type: type of a pin
>+ *
>+ * Set pin state on a pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - OK or no change required
>+ * * negative - error
>+ */
>+static int
>+ice_dpll_pin_state_set(const struct dpll_pin *pin, void *pin_priv,
>+		       const struct dpll_device *dpll, void *dpll_priv,
>+		       bool enable, struct netlink_ext_ack *extack,
>+		       enum ice_dpll_pin_type pin_type)
>+{
>+	struct ice_pf *pf = ((struct ice_dpll *)dpll_priv)->pf;
>+	struct ice_dpll_pin *p = pin_priv;
>+	int ret = -EINVAL;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	if (enable)
>+		ret = ice_dpll_pin_enable(&pf->hw, p, pin_type);
>+	else
>+		ret = ice_dpll_pin_disable(&pf->hw, p, pin_type);
>+	if (!ret)
>+		ret = ice_dpll_pin_state_update(pf, p, pin_type);
>+	ice_dpll_cb_unlock(pf);
>+	if (ret)
>+		dev_err(ice_pf_to_dev(pf),

You have another dev_err inside ice_dpll_pin_enable(). Please avoid
redundancies like that.


>+			"%s: dpll:%p, pin:%p, p:%p pf:%p enable:%d ret:%d\n",
>+			__func__, dpll, pin, p, pf, enable, ret);

Quite cryptic. Make it more readable and use extack to pass the error
message to the user.

Actually, I don't want to repeat myself, but could you please do this
conversion in the rest of the ops as well. I mean, if you have extack,
just fill it up properly so the user knows what is wrong. Avoid the
dev_errs() in that cases.


>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_output_state_set - enable/disable output pin on dpll device
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: dpll being configured
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: state of pin to be set
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Set given state on output type pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - successfully enabled mode
>+ * * negative - failed to enable mode
>+ */
>+static int
>+ice_dpll_output_state_set(const struct dpll_pin *pin, void *pin_priv,
>+			  const struct dpll_device *dpll, void *dpll_priv,
>+			  enum dpll_pin_state state,
>+			  struct netlink_ext_ack *extack)
>+{
>+	bool enable = state == DPLL_PIN_STATE_CONNECTED ? true : false;

Just:
	bool enable = state == DPLL_PIN_STATE_CONNECTED;


>+
>+	return ice_dpll_pin_state_set(pin, pin_priv, dpll, dpll_priv, enable,
>+				      extack, ICE_DPLL_PIN_TYPE_OUTPUT);
>+}
>+
>+/**
>+ * ice_dpll_input_state_set - enable/disable input pin on dpll levice
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: dpll being configured
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: state of pin to be set
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Enables given mode on input type pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - successfully enabled mode
>+ * * negative - failed to enable mode
>+ */
>+static int
>+ice_dpll_input_state_set(const struct dpll_pin *pin, void *pin_priv,
>+			 const struct dpll_device *dpll, void *dpll_priv,
>+			 enum dpll_pin_state state,
>+			 struct netlink_ext_ack *extack)
>+{
>+	bool enable = state == DPLL_PIN_STATE_SELECTABLE ? true : false;

Just:
	bool enable = state == DPLL_PIN_STATE_SELECTABLE;

>+
>+	return ice_dpll_pin_state_set(pin, pin_priv, dpll, dpll_priv, enable,
>+				      extack, ICE_DPLL_PIN_TYPE_INPUT);
>+}
>+
>+/**
>+ * ice_dpll_pin_state_get - set pin's state on dpll
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: on success holds state of the pin
>+ * @extack: error reporting
>+ * @pin_type: type of questioned pin
>+ *
>+ * Determine pin state set it on a pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failed to get state
>+ */
>+static int
>+ice_dpll_pin_state_get(const struct dpll_pin *pin, void *pin_priv,
>+		       const struct dpll_device *dpll,  void *dpll_priv,
>+		       enum dpll_pin_state *state,
>+		       struct netlink_ext_ack *extack,
>+		       enum ice_dpll_pin_type pin_type)
>+{
>+	struct ice_pf *pf = ((struct ice_dpll *)dpll_priv)->pf;
>+	struct ice_dpll_pin *p = pin_priv;
>+	struct ice_dpll *d;
>+	int ret = -EINVAL;

Pointless init, drop it.

>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	d = ice_find_dpll(pf, dpll);

This is a leftover. please remove, use dpll_priv and remove
ice_find_dpll() entirely.


>+	if (!d)
>+		goto unlock;
>+	ret = ice_dpll_pin_state_update(pf, p, pin_type);
>+	if (ret)
>+		goto unlock;
>+	if (pin_type == ICE_DPLL_PIN_TYPE_INPUT)
>+		*state = p->state[d->dpll_idx];
>+	else if (pin_type == ICE_DPLL_PIN_TYPE_OUTPUT)
>+		*state = p->state[0];
>+	ret = 0;
>+unlock:
>+	ice_dpll_cb_unlock(pf);
>+	if (ret)
>+		dev_err(ice_pf_to_dev(pf),
>+			"%s: dpll:%p, pin:%p, pf:%p state: %d ret:%d\n",
>+			__func__, dpll, pin, pf, *state, ret);
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_output_state_get - get output pin state on dpll device
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: on success holds state of the pin
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Check state of a pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failed to get state
>+ */
>+static int
>+ice_dpll_output_state_get(const struct dpll_pin *pin, void *pin_priv,
>+			  const struct dpll_device *dpll, void *dpll_priv,
>+			  enum dpll_pin_state *state,
>+			  struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_pin_state_get(pin, pin_priv, dpll, dpll_priv, state,
>+				      extack, ICE_DPLL_PIN_TYPE_OUTPUT);
>+}
>+
>+/**
>+ * ice_dpll_input_state_get - get input pin state on dpll device
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @state: on success holds state of the pin
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Check state of a input pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failed to get state
>+ */
>+static int
>+ice_dpll_input_state_get(const struct dpll_pin *pin, void *pin_priv,
>+			 const struct dpll_device *dpll, void *dpll_priv,
>+			 enum dpll_pin_state *state,
>+			 struct netlink_ext_ack *extack)
>+{
>+	return ice_dpll_pin_state_get(pin, pin_priv, dpll, dpll_priv, state,
>+				      extack, ICE_DPLL_PIN_TYPE_INPUT);
>+}
>+
>+/**
>+ * ice_dpll_input_prio_get - get dpll's input prio
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @prio: on success - returns input priority on dpll
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Handler for getting priority of a input pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int
>+ice_dpll_input_prio_get(const struct dpll_pin *pin, void *pin_priv,
>+			const struct dpll_device *dpll, void *dpll_priv,
>+			u32 *prio, struct netlink_ext_ack *extack)
>+{
>+	struct ice_dpll_pin *p = pin_priv;
>+	struct ice_dpll *d = dpll_priv;
>+	struct ice_pf *pf = d->pf;
>+	int ret = -EINVAL;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	*prio = d->input_prio[p->idx];
>+	ice_dpll_cb_unlock(pf);
>+	dev_dbg(ice_pf_to_dev(pf), "%s: dpll:%p, pin:%p, pf:%p ret:%d\n",
>+		__func__, dpll, pin, pf, ret);

What exactly is this good for?


>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_input_prio_set - set dpll input prio
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @prio: input priority to be set on dpll
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Handler for setting priority of a input pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int
>+ice_dpll_input_prio_set(const struct dpll_pin *pin, void *pin_priv,
>+			const struct dpll_device *dpll, void *dpll_priv,
>+			u32 prio, struct netlink_ext_ack *extack)
>+{
>+	struct ice_dpll_pin *p = pin_priv;
>+	struct ice_dpll *d = dpll_priv;
>+	struct ice_pf *pf = d->pf;
>+	int ret = -EINVAL;
>+
>+	if (prio > ICE_DPLL_PRIO_MAX) {
>+		NL_SET_ERR_MSG_FMT(extack, "prio out of supported range 0-%d",
>+				   ICE_DPLL_PRIO_MAX);
>+		return ret;
>+	}
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	ret = ice_dpll_hw_input_prio_set(pf, d, p, prio);
>+	if (ret)
>+		NL_SET_ERR_MSG_FMT(extack, "unable to set prio: %u", prio);
>+	ice_dpll_cb_unlock(pf);
>+	dev_dbg(ice_pf_to_dev(pf), "%s: dpll:%p, pin:%p, pf:%p ret:%d\n",
>+		__func__, dpll, pin, pf, ret);

Same here.


>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_input_direction - callback for get input pin direction
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @direction: holds input pin direction
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Handler for getting direction of a input pin.
>+ *
>+ * Return:
>+ * * 0 - success
>+ */
>+static int
>+ice_dpll_input_direction(const struct dpll_pin *pin, void *pin_priv,
>+			 const struct dpll_device *dpll, void *dpll_priv,
>+			 enum dpll_pin_direction *direction,
>+			 struct netlink_ext_ack *extack)
>+{
>+	*direction = DPLL_PIN_DIRECTION_INPUT;
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_output_direction - callback for get output pin direction
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @dpll: registered dpll pointer
>+ * @dpll_priv: private data pointer passed on dpll registration
>+ * @direction: holds output pin direction
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback. Handler for getting direction of an output pin.
>+ *
>+ * Return:
>+ * * 0 - success
>+ */
>+static int
>+ice_dpll_output_direction(const struct dpll_pin *pin, void *pin_priv,
>+			  const struct dpll_device *dpll, void *dpll_priv,
>+			  enum dpll_pin_direction *direction,
>+			  struct netlink_ext_ack *extack)
>+{
>+	*direction = DPLL_PIN_DIRECTION_OUTPUT;
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_rclk_state_on_pin_set - set a state on rclk pin
>+ * @dpll: registered dpll pointer
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @parent_pin: pin parent pointer
>+ * @state: state to be set on pin
>+ * @extack: error reporting
>+ *
>+ * Dpll subsystem callback, set a state of a rclk pin on a parent pin
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int
>+ice_dpll_rclk_state_on_pin_set(const struct dpll_pin *pin, void *pin_priv,
>+			       const struct dpll_pin *parent_pin,
>+			       void *parent_pin_priv,
>+			       enum dpll_pin_state state,
>+			       struct netlink_ext_ack *extack)
>+{
>+	bool enable = state == DPLL_PIN_STATE_CONNECTED ? true : false;

You have an odd pattern of this assing. Please avoid "? true : false"
in the whole patch.


>+	struct ice_dpll_pin *p = pin_priv, *parent = parent_pin_priv;
>+	struct ice_pf *pf = p->pf;
>+	int ret = -EINVAL;

Also you have an odd patter of initializing "ret" variable and assign
value to it 2 lines below. Please avoid it.


>+	u32 hw_idx;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	hw_idx = parent->idx - pf->dplls.base_rclk_idx;
>+	if (hw_idx >= pf->dplls.num_inputs)
>+		goto unlock;
>+
>+	if ((enable && p->state[hw_idx] == DPLL_PIN_STATE_CONNECTED) ||
>+	    (!enable && p->state[hw_idx] == DPLL_PIN_STATE_DISCONNECTED)) {
>+		ret = -EINVAL;

Extack.


>+		goto unlock;
>+	}
>+	ret = ice_aq_set_phy_rec_clk_out(&pf->hw, hw_idx, enable,
>+					 &p->freq);
>+unlock:
>+	ice_dpll_cb_unlock(pf);
>+	dev_dbg(ice_pf_to_dev(pf),
>+		"%s: parent:%p, pin:%p, pf:%p hw_idx:%u enable:%d ret:%d\n",
>+		__func__, parent_pin, pin, pf, hw_idx, enable, ret);

What is this good for? Again, lots of debug messages like this in the
whole patch. Do you need it, for what? If not, remove please.


>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_rclk_state_on_pin_get - get a state of rclk pin
>+ * @pin: pointer to a pin
>+ * @pin_priv: private data pointer passed on pin registration
>+ * @parent_pin: pin parent pointer
>+ * @state: on success holds pin state on parent pin
>+ * @extack: error reporting
>+ *
>+ * dpll subsystem callback, get a state of a recovered clock pin.
>+ *
>+ * Context: Acquires pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - failure
>+ */
>+static int
>+ice_dpll_rclk_state_on_pin_get(const struct dpll_pin *pin, void *pin_priv,
>+			       const struct dpll_pin *parent_pin,
>+			       void *parent_pin_priv,
>+			       enum dpll_pin_state *state,
>+			       struct netlink_ext_ack *extack)
>+{
>+	struct ice_dpll_pin *p = pin_priv, *parent = parent_pin_priv;
>+	struct ice_pf *pf = p->pf;
>+	int ret = -EFAULT;
>+	u32 hw_idx;
>+
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret)
>+		return ret;
>+	hw_idx = parent->idx - pf->dplls.base_rclk_idx;
>+	if (hw_idx >= pf->dplls.num_inputs)
>+		goto unlock;
>+
>+	ret = ice_dpll_pin_state_update(pf, p, ICE_DPLL_PIN_TYPE_RCLK_INPUT);
>+	if (ret)
>+		goto unlock;
>+
>+	*state = p->state[hw_idx];
>+	ret = 0;
>+unlock:
>+	ice_dpll_cb_unlock(pf);
>+	dev_dbg(ice_pf_to_dev(pf),
>+		"%s: parent:%p, pin:%p, pf:%p hw_idx:%u state:%u ret:%d\n",
>+		__func__, parent_pin, pin, pf, hw_idx, *state, ret);
>+
>+	return ret;
>+}
>+
>+static const struct dpll_pin_ops ice_dpll_rclk_ops = {
>+	.state_on_pin_set = ice_dpll_rclk_state_on_pin_set,
>+	.state_on_pin_get = ice_dpll_rclk_state_on_pin_get,
>+	.direction_get = ice_dpll_input_direction,
>+};
>+
>+static const struct dpll_pin_ops ice_dpll_input_ops = {
>+	.frequency_get = ice_dpll_input_frequency_get,
>+	.frequency_set = ice_dpll_input_frequency_set,
>+	.state_on_dpll_get = ice_dpll_input_state_get,
>+	.state_on_dpll_set = ice_dpll_input_state_set,
>+	.prio_get = ice_dpll_input_prio_get,
>+	.prio_set = ice_dpll_input_prio_set,
>+	.direction_get = ice_dpll_input_direction,
>+};
>+
>+static const struct dpll_pin_ops ice_dpll_output_ops = {
>+	.frequency_get = ice_dpll_output_frequency_get,
>+	.frequency_set = ice_dpll_output_frequency_set,
>+	.state_on_dpll_get = ice_dpll_output_state_get,
>+	.state_on_dpll_set = ice_dpll_output_state_set,
>+	.direction_get = ice_dpll_output_direction,
>+};
>+
>+static const struct dpll_device_ops ice_dpll_ops = {
>+	.lock_status_get = ice_dpll_lock_status_get,
>+	.mode_get = ice_dpll_mode_get,
>+	.mode_supported = ice_dpll_mode_supported,
>+};
>+
>+/**
>+ * ice_dpll_deinit_info - release memory allocated for pins info
>+ * @pf: board private structure
>+ *
>+ * Release memory allocated for pins by ice_dpll_init_info function.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void ice_dpll_deinit_info(struct ice_pf *pf)
>+{
>+	kfree(pf->dplls.inputs);
>+	pf->dplls.inputs = NULL;
>+	kfree(pf->dplls.outputs);
>+	pf->dplls.outputs = NULL;
>+	kfree(pf->dplls.eec.input_prio);
>+	pf->dplls.eec.input_prio = NULL;
>+	kfree(pf->dplls.pps.input_prio);
>+	pf->dplls.pps.input_prio = NULL;

Why you NULL the pointers? Do you use them later on? If not, please
drop it, it's confusing.



>+}
>+
>+/**
>+ * ice_dpll_deinit_rclk_pin - release rclk pin resources
>+ * @pf: board private structure
>+ *
>+ * Deregister rclk pin from parent pins and release resources in dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void ice_dpll_deinit_rclk_pin(struct ice_pf *pf)
>+{
>+	struct ice_dpll_pin *rclk = &pf->dplls.rclk;
>+	struct ice_vsi *vsi = ice_get_main_vsi(pf);
>+	struct dpll_pin *parent;
>+	int i;
>+
>+	for (i = 0; i < rclk->num_parents; i++) {
>+		parent = pf->dplls.inputs[rclk->parent_idx[i]].pin;
>+		if (!parent)
>+			continue;
>+		if (!IS_ERR_OR_NULL(rclk->pin))
>+			dpll_pin_on_pin_unregister(parent, rclk->pin,
>+						   &ice_dpll_rclk_ops, rclk);
>+	}
>+	if (WARN_ON_ONCE(!vsi || !vsi->netdev))
>+		return;
>+	netdev_dpll_pin_clear(vsi->netdev);
>+	dpll_pin_put(rclk->pin);
>+	rclk->pin = NULL;

Why you need to NULL it? If don't, please drop to avoid confusions.
Same goes to the rest of the NULLing occurances in deinit() functions.


>+}
>+
>+/**
>+ * ice_dpll_unregister_pins - unregister pins from a dpll
>+ * @dpll: dpll device pointer
>+ * @pins: pointer to pins array
>+ * @ops: callback ops registered with the pins
>+ * @count: number of pins
>+ *
>+ * Unregister pins of a given array of pins from given dpll device registered in
>+ * dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void
>+ice_dpll_unregister_pins(struct dpll_device *dpll, struct ice_dpll_pin *pins,
>+			 const struct dpll_pin_ops *ops, int count)
>+{
>+	struct ice_dpll_pin *p;
>+	int i;
>+
>+	for (i = 0; i < count; i++) {
>+		p = &pins[i];
>+		if (p && !IS_ERR_OR_NULL(p->pin))

How can the p be NULL? I don't think it can.

Please void the whole check here.
Do the error path rollback in init() function properly.


>+			dpll_pin_unregister(dpll, p->pin, ops, p);
>+	}
>+}
>+
>+/**
>+ * ice_dpll_release_pins - release pins resources from dpll subsystem
>+ * @pf: board private structure
>+ * @pins: pointer to pins array
>+ * @count: number of pins
>+ *
>+ * Release resources of given pins array in the dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void ice_dpll_release_pins(struct ice_dpll_pin *pins, int count)
>+{
>+	struct ice_dpll_pin *p;
>+	int i;
>+
>+	for (i = 0; i < count; i++) {
>+		p = &pins[i];
>+		if (p && !IS_ERR_OR_NULL(p->pin)) {

Same here.

Please void the whole check here.
Do the error path rollback in init() function properly.


>+			dpll_pin_put(p->pin);
>+			p->pin = NULL;
>+		}
>+	}
>+}
>+
>+/**
>+ * ice_dpll_get_pins - get pins from dpll subsystem
>+ * @pf: board private structure
>+ * @pins: pointer to pins array
>+ * @start_idx: get starts from this pin idx value
>+ * @count: number of pins
>+ * @clock_id: clock_id of dpll device
>+ *
>+ * Get pins - allocate - in dpll subsystem, store them in pin field of given
>+ * pins array.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - allocation failure reason
>+ */
>+static int
>+ice_dpll_get_pins(struct ice_pf *pf, struct ice_dpll_pin *pins,
>+		  int start_idx, int count, u64 clock_id)
>+{
>+	int i, ret;
>+
>+	for (i = 0; i < count; i++) {
>+		pins[i].pin = dpll_pin_get(clock_id, i + start_idx, THIS_MODULE,
>+					   &pins[i].prop);
>+		if (IS_ERR(pins[i].pin)) {
>+			ret = PTR_ERR(pins[i].pin);
>+			goto release_pins;
>+		}
>+	}
>+
>+	return 0;
>+
>+release_pins:
>+	ice_dpll_release_pins(pins, i);


Please call dpll_pin_put() in a loop here.


>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_register_pins - register pins with a dpll
>+ * @dpll: dpll pointer to register pins with
>+ * @pins: pointer to pins array
>+ * @ops: callback ops registered with the pins
>+ * @count: number of pins
>+ * @cgu: if cgu is present and controlled by this NIC
>+ *
>+ * Register pins of a given array with given dpll in dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - registration failure reason
>+ */
>+static int
>+ice_dpll_register_pins(struct dpll_device *dpll, struct ice_dpll_pin *pins,
>+		       const struct dpll_pin_ops *ops, int count)
>+{
>+	int ret, i;
>+
>+	for (i = 0; i < count; i++) {
>+		ret = dpll_pin_register(dpll, pins[i].pin, ops, &pins[i]);
>+		if (ret)
>+			goto unregister_pins;
>+	}
>+
>+	return 0;
>+
>+unregister_pins:
>+	ice_dpll_unregister_pins(dpll, pins, ops, i);

Please call dpll_pin_unregister() in a loop here.

>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_init_direct_pins - initialize direct pins
>+ * @dpll: dpll pointer to register pins with
>+ * @cgu: if cgu is present and controlled by this NIC
>+ * @pins: pointer to pins array
>+ * @start_idx: on which index shall allocation start in dpll subsystem
>+ * @count: number of pins
>+ * @ops: callback ops registered with the pins
>+ * @first: dpll device pointer
>+ * @second: dpll device pointer
>+ *
>+ * Allocate directly connected pins of a given array in dpll subsystem.
>+ * If cgu is owned register allocated pins with given dplls.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - registration failure reason
>+ */
>+static int
>+ice_dpll_init_direct_pins(struct ice_pf *pf, bool cgu,
>+			  struct ice_dpll_pin *pins, int start_idx, int count,
>+			  const struct dpll_pin_ops *ops,
>+			  struct dpll_device *first, struct dpll_device *second)
>+{
>+	int ret;
>+
>+	ret = ice_dpll_get_pins(pf, pins, start_idx, count, pf->dplls.clock_id);
>+	if (ret)
>+		return ret;
>+	if (cgu) {
>+		ret = ice_dpll_register_pins(first, pins, ops, count);
>+		if (ret)
>+			goto release_pins;
>+		ret = ice_dpll_register_pins(second, pins, ops, count);
>+		if (ret)
>+			goto unregister_first;
>+	}
>+
>+	return 0;
>+
>+unregister_first:
>+	ice_dpll_unregister_pins(first, pins, ops, count);
>+release_pins:
>+	ice_dpll_release_pins(pins, count);
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_deinit_direct_pins - deinitialize direct pins
>+ * @cgu: if cgu is present and controlled by this NIC
>+ * @pins: pointer to pins array
>+ * @count: number of pins
>+ * @ops: callback ops registered with the pins
>+ * @first: dpll device pointer
>+ * @second: dpll device pointer
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * If cgu is owned unregister pins from given dplls.
>+ * Release pins resources to the dpll subsystem.
>+ */
>+static void
>+ice_dpll_deinit_direct_pins(bool cgu, struct ice_dpll_pin *pins, int count,
>+			    const struct dpll_pin_ops *ops,
>+			    struct dpll_device *first,
>+			    struct dpll_device *second)
>+{
>+	if (cgu) {
>+		ice_dpll_unregister_pins(first, pins, ops, count);
>+		ice_dpll_unregister_pins(second, pins, ops, count);
>+	}
>+	ice_dpll_release_pins(pins, count);
>+}
>+
>+/**
>+ * ice_dpll_init_rclk_pins - initialize recovered clock pin
>+ * @dpll: dpll pointer to register pins with
>+ * @cgu: if cgu is present and controlled by this NIC
>+ * @pins: pointer to pins array
>+ * @start_idx: on which index shall allocation start in dpll subsystem
>+ * @count: number of pins
>+ * @ops: callback ops registered with the pins
>+ *
>+ * Allocate resource for recovered clock pin in dpll subsystem. Register the
>+ * pin with the parents it has in the info. Register pin with the pf's main vsi
>+ * netdev.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - registration failure reason
>+ */
>+static int
>+ice_dpll_init_rclk_pins(struct ice_pf *pf, struct ice_dpll_pin *pin,
>+			int start_idx, const struct dpll_pin_ops *ops)

It is a good practise to have the init/cleanup functions of the same
thing one behind the another. Could you please reorder the code to
achieve that?


>+{
>+	struct ice_vsi *vsi = ice_get_main_vsi(pf);
>+	struct dpll_pin *parent;
>+	int ret, i;
>+
>+	ret = ice_dpll_get_pins(pf, pin, start_idx, ICE_DPLL_RCLK_NUM_PER_PF,
>+				pf->dplls.clock_id);
>+	if (ret)
>+		return ret;
>+	for (i = 0; i < pf->dplls.rclk.num_parents; i++) {
>+		parent = pf->dplls.inputs[pf->dplls.rclk.parent_idx[i]].pin;
>+		if (!parent) {
>+			ret = -ENODEV;
>+			goto unregister_pins;
>+		}
>+		ret = dpll_pin_on_pin_register(parent, pf->dplls.rclk.pin,
>+					       ops, &pf->dplls.rclk);
>+		if (ret)
>+			goto unregister_pins;
>+	}
>+	if (WARN_ON((!vsi || !vsi->netdev)))
>+		return -EINVAL;
>+	netdev_dpll_pin_set(vsi->netdev, pf->dplls.rclk.pin);
>+
>+	return 0;
>+
>+unregister_pins:
>+	while (i) {
>+		parent = pf->dplls.inputs[pf->dplls.rclk.parent_idx[--i]].pin;
>+		dpll_pin_on_pin_unregister(parent, pf->dplls.rclk.pin,
>+					   &ice_dpll_rclk_ops, &pf->dplls.rclk);
>+	}
>+	ice_dpll_release_pins(pin, ICE_DPLL_RCLK_NUM_PER_PF);
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_init_pins - init pins and register pins with a dplls
>+ * @pf: board private structure
>+ * @cgu: if cgu is present and controlled by this NIC
>+ *
>+ * Initialize directly connected pf's pins within pf's dplls in a Linux dpll
>+ * subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - initialization failure reason
>+ */
>+static int ice_dpll_init_pins(struct ice_pf *pf, bool cgu)
>+{
>+	u32 rclk_idx;
>+	int ret;
>+
>+	ret = ice_dpll_init_direct_pins(pf, cgu, pf->dplls.inputs, 0,
>+					pf->dplls.num_inputs,
>+					&ice_dpll_input_ops,
>+					pf->dplls.eec.dpll, pf->dplls.pps.dpll);
>+	if (ret)
>+		return ret;
>+	if (cgu) {
>+		ret = ice_dpll_init_direct_pins(pf, cgu, pf->dplls.outputs,
>+						pf->dplls.num_inputs,
>+						pf->dplls.num_outputs,
>+						&ice_dpll_output_ops,
>+						pf->dplls.eec.dpll,
>+						pf->dplls.pps.dpll);
>+		if (ret)
>+			goto deinit_inputs;
>+	}
>+	rclk_idx = pf->dplls.num_inputs + pf->dplls.num_outputs + pf->hw.pf_id;
>+	ret = ice_dpll_init_rclk_pins(pf, &pf->dplls.rclk, rclk_idx,
>+				      &ice_dpll_rclk_ops);
>+	if (ret)
>+		goto deinit_outputs;
>+
>+	return 0;
>+deinit_outputs:
>+	ice_dpll_deinit_direct_pins(cgu, pf->dplls.outputs,
>+				    pf->dplls.num_outputs,
>+				    &ice_dpll_output_ops, pf->dplls.pps.dpll,
>+				    pf->dplls.eec.dpll);
>+deinit_inputs:
>+	ice_dpll_deinit_direct_pins(cgu, pf->dplls.inputs, pf->dplls.num_inputs,
>+				    &ice_dpll_input_ops, pf->dplls.pps.dpll,
>+				    pf->dplls.eec.dpll);
>+	return ret;
>+}
>+
>+/**
>+ * ice_generate_clock_id - generates unique clock_id for registering dpll.
>+ * @pf: board private structure
>+ *
>+ * Generates unique (per board) clock_id for allocation and search of dpll
>+ * devices in Linux dpll subsystem.
>+ *
>+ * Return: generated clock id for the board
>+ */
>+static u64 ice_generate_clock_id(struct ice_pf *pf)
>+{
>+	return pci_get_dsn(pf->pdev);
>+}
>+
>+/**
>+ * ice_dpll_init_dpll - initialize dpll device in dpll subsystem
>+ * @pf: board private structure
>+ * @d: dpll to be initialized
>+ * @cgu: if cgu is present and controlled by this NIC
>+ * @type: type of dpll being initialized
>+ *
>+ * Allocate dpll instance for this board in dpll subsystem, if cgu is controlled
>+ * by this NIC, register dpll with the callback ops.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - initialization failure reason
>+ */
>+static int
>+ice_dpll_init_dpll(struct ice_pf *pf, struct ice_dpll *d, bool cgu,
>+		   enum dpll_type type)
>+{
>+	u64 clock_id = pf->dplls.clock_id;
>+	int ret;
>+
>+	d->dpll = dpll_device_get(clock_id, d->dpll_idx, THIS_MODULE);
>+	if (IS_ERR(d->dpll)) {
>+		ret = PTR_ERR(d->dpll);
>+		dev_err(ice_pf_to_dev(pf),
>+			"dpll_device_get failed (%p) err=%d\n", d, ret);
>+		return ret;
>+	}
>+	d->pf = pf;
>+	if (cgu) {
>+		ret = dpll_device_register(d->dpll, type, &ice_dpll_ops, d);
>+		if (ret) {
>+			dpll_device_put(d->dpll);
>+			return ret;
>+		}
>+	}
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_update_state - update dpll state
>+ * @pf: pf private structure
>+ * @d: pointer to queried dpll device
>+ *
>+ * Poll current state of dpll from hw and update ice_dpll struct.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - AQ failure
>+ */
>+static int
>+ice_dpll_update_state(struct ice_pf *pf, struct ice_dpll *d, bool init)
>+{
>+	struct ice_dpll_pin *p;
>+	int ret;
>+
>+	ret = ice_get_cgu_state(&pf->hw, d->dpll_idx, d->prev_dpll_state,
>+				&d->input_idx, &d->ref_state, &d->eec_mode,
>+				&d->phase_offset, &d->dpll_state);
>+
>+	dev_dbg(ice_pf_to_dev(pf),
>+		"update dpll=%d, prev_src_idx:%u, src_idx:%u, state:%d, prev:%d\n",
>+		d->dpll_idx, d->prev_input_idx, d->input_idx,
>+		d->dpll_state, d->prev_dpll_state);
>+	if (ret) {
>+		dev_err(ice_pf_to_dev(pf),
>+			"update dpll=%d state failed, ret=%d %s\n",
>+			d->dpll_idx, ret,
>+			ice_aq_str(pf->hw.adminq.sq_last_status));
>+		return ret;
>+	}
>+	if (init) {
>+		if (d->dpll_state == ICE_CGU_STATE_LOCKED &&
>+		    d->dpll_state == ICE_CGU_STATE_LOCKED_HO_ACQ)
>+			d->active_input = pf->dplls.inputs[d->input_idx].pin;
>+		p = &pf->dplls.inputs[d->input_idx];
>+		return ice_dpll_pin_state_update(pf, p,
>+						 ICE_DPLL_PIN_TYPE_INPUT);
>+	}
>+	if (d->dpll_state == ICE_CGU_STATE_HOLDOVER ||
>+	    d->dpll_state == ICE_CGU_STATE_FREERUN) {
>+		d->active_input = NULL;
>+		p = &pf->dplls.inputs[d->input_idx];
>+		d->prev_input_idx = ICE_DPLL_PIN_IDX_INVALID;
>+		d->input_idx = ICE_DPLL_PIN_IDX_INVALID;
>+		ret = ice_dpll_pin_state_update(pf, p,
>+						ICE_DPLL_PIN_TYPE_INPUT);
>+	} else if (d->input_idx != d->prev_input_idx) {
>+		p = &pf->dplls.inputs[d->prev_input_idx];
>+		ice_dpll_pin_state_update(pf, p, ICE_DPLL_PIN_TYPE_INPUT);
>+		p = &pf->dplls.inputs[d->input_idx];
>+		d->active_input = p->pin;
>+		ice_dpll_pin_state_update(pf, p, ICE_DPLL_PIN_TYPE_INPUT);
>+		d->prev_input_idx = d->input_idx;
>+	}
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_notify_changes - notify dpll subsystem about changes
>+ * @d: pointer do dpll
>+ *
>+ * Once change detected appropriate event is submitted to the dpll subsystem.
>+ */
>+static void ice_dpll_notify_changes(struct ice_dpll *d)
>+{
>+	if (d->prev_dpll_state != d->dpll_state) {
>+		d->prev_dpll_state = d->dpll_state;
>+		dpll_device_change_ntf(d->dpll);
>+	}
>+	if (d->prev_input != d->active_input) {
>+		if (d->prev_input)
>+			dpll_pin_change_ntf(d->prev_input);
>+		d->prev_input = d->active_input;
>+		if (d->active_input)
>+			dpll_pin_change_ntf(d->active_input);
>+	}
>+}
>+
>+/**
>+ * ice_dpll_periodic_work - DPLLs periodic worker
>+ * @work: pointer to kthread_work structure
>+ *
>+ * DPLLs periodic worker is responsible for polling state of dpll.
>+ * Context: Holds pf->dplls.lock
>+ */
>+static void ice_dpll_periodic_work(struct kthread_work *work)
>+{
>+	struct ice_dplls *d = container_of(work, struct ice_dplls, work.work);
>+	struct ice_pf *pf = container_of(d, struct ice_pf, dplls);
>+	struct ice_dpll *de = &pf->dplls.eec;
>+	struct ice_dpll *dp = &pf->dplls.pps;
>+	int ret = 0;
>+
>+	if (!test_bit(ICE_FLAG_DPLL, pf->flags))

How exactly could this happen? I don't think it can. Drop it.


>+		return;
>+	ret = ice_dpll_cb_lock(pf);
>+	if (ret) {
>+		d->lock_err_num++;

Drop this struct field, you don't use it anywhere.


>+		goto resched;
>+	}
>+	ret = ice_dpll_update_state(pf, de, false);
>+	if (!ret)
>+		ret = ice_dpll_update_state(pf, dp, false);
>+	if (ret) {
>+		d->cgu_state_acq_err_num++;
>+		/* stop rescheduling this worker */
>+		if (d->cgu_state_acq_err_num >
>+		    ICE_CGU_STATE_ACQ_ERR_THRESHOLD) {
>+			dev_err(ice_pf_to_dev(pf),
>+				"EEC/PPS DPLLs periodic work disabled\n");
>+			return;
>+		}
>+	}
>+	ice_dpll_cb_unlock(pf);
>+	ice_dpll_notify_changes(de);
>+	ice_dpll_notify_changes(dp);
>+resched:
>+	/* Run twice a second or reschedule if update failed */
>+	kthread_queue_delayed_work(d->kworker, &d->work,
>+				   ret ? msecs_to_jiffies(10) :
>+				   msecs_to_jiffies(500));
>+}
>+
>+/**
>+ * ice_dpll_init_worker - Initialize DPLLs periodic worker
>+ * @pf: board private structure
>+ *
>+ * Create and start DPLLs periodic worker.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ * Return:
>+ * * 0 - success
>+ * * negative - create worker failure
>+ */
>+static int ice_dpll_init_worker(struct ice_pf *pf)
>+{
>+	struct ice_dplls *d = &pf->dplls;
>+	struct kthread_worker *kworker;
>+
>+	ice_dpll_update_state(pf, &d->eec, true);
>+	ice_dpll_update_state(pf, &d->pps, true);
>+	kthread_init_delayed_work(&d->work, ice_dpll_periodic_work);
>+	kworker = kthread_create_worker(0, "ice-dplls-%s",
>+					dev_name(ice_pf_to_dev(pf)));
>+	if (IS_ERR(kworker))
>+		return PTR_ERR(kworker);
>+	d->kworker = kworker;
>+	d->cgu_state_acq_err_num = 0;
>+	kthread_queue_delayed_work(d->kworker, &d->work, 0);
>+
>+	return 0;
>+}
>+
>+/**
>+ * ice_dpll_deinit_pins - deinitialize direct pins
>+ * @pf: board private structure
>+ * @cgu: if cgu is controlled by this pf
>+ *
>+ * If cgu is owned unregister directly connected pins from the dplls.
>+ * Release resources of directly connected pins from the dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void ice_dpll_deinit_pins(struct ice_pf *pf, bool cgu)
>+{
>+	struct ice_dpll_pin *outputs = pf->dplls.outputs;
>+	struct ice_dpll_pin *inputs = pf->dplls.inputs;
>+	int num_outputs = pf->dplls.num_outputs;
>+	int num_inputs = pf->dplls.num_inputs;
>+	struct ice_dplls *d = &pf->dplls;
>+	struct ice_dpll *de = &d->eec;
>+	struct ice_dpll *dp = &d->pps;
>+
>+	ice_dpll_deinit_rclk_pin(pf);
>+	if (cgu) {
>+		ice_dpll_unregister_pins(dp->dpll, inputs, &ice_dpll_input_ops,
>+					 num_inputs);
>+		ice_dpll_unregister_pins(de->dpll, inputs, &ice_dpll_input_ops,
>+					 num_inputs);
>+	}
>+	ice_dpll_release_pins(inputs, num_inputs);
>+	if (cgu) {
>+		ice_dpll_unregister_pins(dp->dpll, outputs,
>+					 &ice_dpll_output_ops, num_outputs);
>+		ice_dpll_unregister_pins(de->dpll, outputs,
>+					 &ice_dpll_output_ops, num_outputs);
>+		ice_dpll_release_pins(outputs, num_outputs);
>+	}
>+}
>+
>+/**
>+ * ice_dpll_deinit_dpll - deinitialize dpll device
>+ * @pf: board private structure
>+ *
>+ * If cgu is owned unregister the dpll from dpll subsystem.
>+ * Release resources of dpll device from dpll subsystem.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void
>+ice_dpll_deinit_dpll(struct ice_pf *pf, struct ice_dpll *d, bool cgu)
>+{
>+	if (!IS_ERR(d->dpll)) {
>+		if (cgu)
>+			dpll_device_unregister(d->dpll, &ice_dpll_ops, d);
>+		dpll_device_put(d->dpll);
>+		dev_dbg(ice_pf_to_dev(pf), "(%p) dpll removed\n", d);
>+	}
>+}
>+
>+/**
>+ * ice_dpll_deinit_worker - deinitialize dpll kworker
>+ * @pf: board private structure
>+ *
>+ * Stop dpll's kworker, release it's resources.
>+ *
>+ * Context: Called under pf->dplls.lock
>+ */
>+static void ice_dpll_deinit_worker(struct ice_pf *pf)
>+{
>+	struct ice_dplls *d = &pf->dplls;
>+
>+	kthread_cancel_delayed_work_sync(&d->work);
>+	if (!IS_ERR_OR_NULL(d->kworker)) {
>+		kthread_destroy_worker(d->kworker);
>+		d->kworker = NULL;
>+		dev_dbg(ice_pf_to_dev(pf), "DPLLs worker removed\n");

What is this msg good for?


>+	}
>+}
>+
>+/**
>+ * ice_dpll_deinit - Disable the driver/HW support for dpll subsystem
>+ * the dpll device.
>+ * @pf: board private structure
>+ *
>+ * Handles the cleanup work required after dpll initialization,freeing resources
>+ * and unregistering the dpll, pin and all resources used for handling them.
>+ *
>+ * Context: Function holds pf->dplls.lock mutex.
>+ */
>+void ice_dpll_deinit(struct ice_pf *pf)
>+{
>+	bool cgu = ice_is_feature_supported(pf, ICE_F_CGU);
>+
>+	if (test_bit(ICE_FLAG_DPLL, pf->flags)) {

How about avoiding the indent are rather do:
	if (!test_bit(ICE_FLAG_DPLL, pf->flags))
		return;

?

>+		mutex_lock(&pf->dplls.lock);

Related to my question in ice_dpll_init(), why do you need to lock the mutex
here?


>+		ice_dpll_deinit_pins(pf, cgu);
>+		ice_dpll_deinit_info(pf);
>+		ice_dpll_deinit_dpll(pf, &pf->dplls.pps, cgu);
>+		ice_dpll_deinit_dpll(pf, &pf->dplls.eec, cgu);

Please reorder to match error path in ice_dpll_init() 

>+		if (cgu)

In ice_dpll_init() you call this "cgu_present". Please be consistent in
naming.


>+			ice_dpll_deinit_worker(pf);
>+		clear_bit(ICE_FLAG_DPLL, pf->flags);
>+		mutex_unlock(&pf->dplls.lock);
>+		mutex_destroy(&pf->dplls.lock);
>+	}
>+}
>+
>+/**
>+ * ice_dpll_init_info_direct_pins - initializes direct pins info
>+ * @pf: board private structure
>+ * @pin_type: type of pins being initialized
>+ *
>+ * Init information for directly connected pins, cache them in pf's pins
>+ * structures.
>+ *
>+ * Context: Function initializes and holds pf->dplls.lock mutex.
>+ * Return:
>+ * * 0 - success
>+ * * negative - init failure reason
>+ */
>+static int
>+ice_dpll_init_info_direct_pins(struct ice_pf *pf,
>+			       enum ice_dpll_pin_type pin_type)
>+{
>+	struct ice_dpll *de = &pf->dplls.eec, *dp = &pf->dplls.pps;
>+	int num_pins, i, ret = -EINVAL;
>+	struct ice_hw *hw = &pf->hw;
>+	struct ice_dpll_pin *pins;
>+	u8 freq_supp_num;
>+	bool input;
>+
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+		pins = pf->dplls.inputs;
>+		num_pins = pf->dplls.num_inputs;
>+		input = true;
>+		break;
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		pins = pf->dplls.outputs;
>+		num_pins = pf->dplls.num_outputs;
>+		input = false;
>+		break;
>+	default:
>+		return ret;
>+	}
>+
>+	for (i = 0; i < num_pins; i++) {
>+		pins[i].idx = i;
>+		pins[i].prop.board_label = ice_cgu_get_pin_name(hw, i, input);
>+		pins[i].prop.type = ice_cgu_get_pin_type(hw, i, input);
>+		if (input) {
>+			ret = ice_aq_get_cgu_ref_prio(hw, de->dpll_idx, i,
>+						      &de->input_prio[i]);
>+			if (ret)
>+				return ret;
>+			ret = ice_aq_get_cgu_ref_prio(hw, dp->dpll_idx, i,
>+						      &dp->input_prio[i]);
>+			if (ret)
>+				return ret;
>+			pins[i].prop.capabilities |=
>+				DPLL_PIN_CAPS_PRIORITY_CAN_CHANGE;
>+		}
>+		pins[i].prop.capabilities |= DPLL_PIN_CAPS_STATE_CAN_CHANGE;
>+		ret = ice_dpll_pin_state_update(pf, &pins[i], pin_type);
>+		if (ret)
>+			return ret;
>+		pins[i].prop.freq_supported =
>+			ice_cgu_get_pin_freq_supp(hw, i, input, &freq_supp_num);
>+		pins[i].prop.freq_supported_num = freq_supp_num;
>+		pins[i].pf = pf;
>+	}
>+
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_init_rclk_pin - initializes rclk pin information
>+ * @pf: board private structure
>+ * @pin_type: type of pins being initialized
>+ *
>+ * Init information for rclk pin, cache them in pf->dplls.rclk.
>+ *
>+ * Return:
>+ * * 0 - success
>+ * * negative - init failure reason
>+ */
>+static int ice_dpll_init_rclk_pin(struct ice_pf *pf)
>+{
>+	struct ice_dpll_pin *pin = &pf->dplls.rclk;
>+	struct device *dev = ice_pf_to_dev(pf);
>+
>+	pin->prop.board_label = dev_name(dev);

What??? Must be some sort of joke, correct?
"board_label" should be an actual writing on a board. For syncE, I don't
think it makes sense to fill any label. The connection to the netdev
should be enough. That is what I do in mlx5.

Please drop this.



>+	pin->prop.type = DPLL_PIN_TYPE_SYNCE_ETH_PORT;
>+	pin->prop.capabilities |= DPLL_PIN_CAPS_STATE_CAN_CHANGE;
>+	pin->pf = pf;
>+
>+	return ice_dpll_pin_state_update(pf, pin,
>+					 ICE_DPLL_PIN_TYPE_RCLK_INPUT);
>+}
>+
>+/**
>+ * ice_dpll_init_pins_info - init pins info wrapper
>+ * @pf: board private structure
>+ * @pin_type: type of pins being initialized
>+ *
>+ * Wraps functions for pin initialization.
>+ *
>+ * Return:
>+ * * 0 - success
>+ * * negative - init failure reason
>+ */
>+static int
>+ice_dpll_init_pins_info(struct ice_pf *pf, enum ice_dpll_pin_type pin_type)
>+{
>+	switch (pin_type) {
>+	case ICE_DPLL_PIN_TYPE_INPUT:
>+	case ICE_DPLL_PIN_TYPE_OUTPUT:
>+		return ice_dpll_init_info_direct_pins(pf, pin_type);
>+	case ICE_DPLL_PIN_TYPE_RCLK_INPUT:
>+		return ice_dpll_init_rclk_pin(pf);
>+	default:
>+		return -EINVAL;
>+	}
>+}
>+
>+/**
>+ * ice_dpll_init_info - prepare pf's dpll information structure
>+ * @pf: board private structure
>+ * @cgu: if cgu is present and controlled by this NIC
>+ *
>+ * Acquire (from HW) and set basic dpll information (on pf->dplls struct).
>+ *
>+ * Return:
>+ * * 0 - success
>+ * * negative - init failure reason
>+ */
>+static int ice_dpll_init_info(struct ice_pf *pf, bool cgu)
>+{
>+	struct ice_aqc_get_cgu_abilities abilities;
>+	struct ice_dpll *de = &pf->dplls.eec;
>+	struct ice_dpll *dp = &pf->dplls.pps;
>+	struct ice_dplls *d = &pf->dplls;
>+	struct ice_hw *hw = &pf->hw;
>+	int ret, alloc_size, i;
>+
>+	d->clock_id = ice_generate_clock_id(pf);
>+	ret = ice_aq_get_cgu_abilities(hw, &abilities);
>+	if (ret) {
>+		dev_err(ice_pf_to_dev(pf),
>+			"err:%d %s failed to read cgu abilities\n",
>+			ret, ice_aq_str(hw->adminq.sq_last_status));
>+		return ret;
>+	}
>+
>+	de->dpll_idx = abilities.eec_dpll_idx;
>+	dp->dpll_idx = abilities.pps_dpll_idx;
>+	d->num_inputs = abilities.num_inputs;
>+	d->num_outputs = abilities.num_outputs;
>+
>+	alloc_size = sizeof(*d->inputs) * d->num_inputs;
>+	d->inputs = kzalloc(alloc_size, GFP_KERNEL);
>+	if (!d->inputs)
>+		return -ENOMEM;
>+
>+	alloc_size = sizeof(*de->input_prio) * d->num_inputs;
>+	de->input_prio = kzalloc(alloc_size, GFP_KERNEL);
>+	if (!de->input_prio)
>+		return -ENOMEM;
>+
>+	dp->input_prio = kzalloc(alloc_size, GFP_KERNEL);
>+	if (!dp->input_prio)
>+		return -ENOMEM;
>+
>+	ret = ice_dpll_init_pins_info(pf, ICE_DPLL_PIN_TYPE_INPUT);
>+	if (ret)
>+		goto deinit_info;
>+
>+	if (cgu) {
>+		alloc_size = sizeof(*d->outputs) * d->num_outputs;
>+		d->outputs = kzalloc(alloc_size, GFP_KERNEL);
>+		if (!d->outputs)
>+			goto deinit_info;
>+
>+		ret = ice_dpll_init_pins_info(pf, ICE_DPLL_PIN_TYPE_OUTPUT);
>+		if (ret)
>+			goto deinit_info;
>+	}
>+
>+	ret = ice_get_cgu_rclk_pin_info(&pf->hw, &d->base_rclk_idx,
>+					&pf->dplls.rclk.num_parents);
>+	if (ret)
>+		return ret;
>+	for (i = 0; i < pf->dplls.rclk.num_parents; i++)
>+		pf->dplls.rclk.parent_idx[i] = d->base_rclk_idx + i;
>+	ret = ice_dpll_init_pins_info(pf, ICE_DPLL_PIN_TYPE_RCLK_INPUT);
>+	if (ret)
>+		return ret;
>+
>+	dev_dbg(ice_pf_to_dev(pf),
>+		"%s - success, inputs:%u, outputs:%u rclk-parents:%u\n",
>+		__func__, d->num_inputs, d->num_outputs, d->rclk.num_parents);
>+
>+	return 0;
>+
>+deinit_info:
>+	dev_err(ice_pf_to_dev(pf),
>+		"%s - fail: d->inputs:%p, de->input_prio:%p, dp->input_prio:%p, d->outputs:%p\n",
>+		__func__, d->inputs, de->input_prio,
>+		dp->input_prio, d->outputs);
>+	ice_dpll_deinit_info(pf);
>+	return ret;
>+}
>+
>+/**
>+ * ice_dpll_init - initialize support for dpll subsystem
>+ * @pf: board private structure
>+ *
>+ * Set up the device dplls, register them and pins connected within Linux dpll
>+ * subsystem. Allow userpsace to obtain state of DPLL and handling of DPLL
>+ * configuration requests.
>+ *
>+ * Return:
>+ * * 0 - success
>+ * * negative - init failure reason
>+ */
>+int ice_dpll_init(struct ice_pf *pf)
>+{
>+	bool cgu_present = ice_is_feature_supported(pf, ICE_F_CGU);
>+	struct ice_dplls *d = &pf->dplls;
>+	int err = 0;
>+
>+	mutex_init(&d->lock);
>+	mutex_lock(&d->lock);

Seeing pattern like this always triggers questions.
Why exactly do you need to lock the mutex here?


>+	err = ice_dpll_init_info(pf, cgu_present);
>+	if (err)
>+		goto err_exit;
>+	err = ice_dpll_init_dpll(pf, &pf->dplls.eec, cgu_present,
>+				 DPLL_TYPE_EEC);
>+	if (err)
>+		goto deinit_info;
>+	err = ice_dpll_init_dpll(pf, &pf->dplls.pps, cgu_present,
>+				 DPLL_TYPE_PPS);
>+	if (err)
>+		goto deinit_eec;
>+	err = ice_dpll_init_pins(pf, cgu_present);
>+	if (err)
>+		goto deinit_pps;
>+	set_bit(ICE_FLAG_DPLL, pf->flags);
>+	if (cgu_present) {
>+		err = ice_dpll_init_worker(pf);
>+		if (err)
>+			goto deinit_pins;
>+	}
>+	mutex_unlock(&d->lock);
>+	dev_info(ice_pf_to_dev(pf), "DPLLs init successful\n");

What is this good for? Please avoid polluting dmesg and drop this.


>+
>+	return err;
>+
>+deinit_pins:
>+	ice_dpll_deinit_pins(pf, cgu_present);
>+deinit_pps:
>+	ice_dpll_deinit_dpll(pf, &pf->dplls.pps, cgu_present);
>+deinit_eec:
>+	ice_dpll_deinit_dpll(pf, &pf->dplls.eec, cgu_present);
>+deinit_info:
>+	ice_dpll_deinit_info(pf);
>+err_exit:
>+	clear_bit(ICE_FLAG_DPLL, pf->flags);
>+	mutex_unlock(&d->lock);
>+	mutex_destroy(&d->lock);
>+	dev_warn(ice_pf_to_dev(pf), "DPLLs init failure err:\n");

You are missing the err. But why do you need the message?


>+
>+	return err;
>+}
>diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.h b/drivers/net/ethernet/intel/ice/ice_dpll.h
>new file mode 100644
>index 000000000000..287892825deb
>--- /dev/null
>+++ b/drivers/net/ethernet/intel/ice/ice_dpll.h
>@@ -0,0 +1,102 @@
>+/* SPDX-License-Identifier: GPL-2.0 */
>+/* Copyright (C) 2022, Intel Corporation. */
>+
>+#ifndef _ICE_DPLL_H_
>+#define _ICE_DPLL_H_
>+
>+#include "ice.h"
>+
>+#define ICE_DPLL_PRIO_MAX	0xF
>+#define ICE_DPLL_RCLK_NUM_MAX	4
>+/** ice_dpll_pin - store info about pins
>+ * @pin: dpll pin structure
>+ * @pf: pointer to pf, which has registered the dpll_pin
>+ * @flags: pin flags returned from HW
>+ * @idx: ice pin private idx
>+ * @state: state of a pin
>+ * @type: type of a pin
>+ * @freq_mask: mask of supported frequencies
>+ * @freq: current frequency of a pin
>+ * @caps: capabilities of a pin
>+ * @name: pin name
>+ */
>+struct ice_dpll_pin {
>+	struct dpll_pin *pin;
>+	struct ice_pf *pf;
>+	u8 idx;
>+	u8 num_parents;
>+	u8 parent_idx[ICE_DPLL_RCLK_NUM_MAX];
>+	u8 flags[ICE_DPLL_RCLK_NUM_MAX];
>+	u8 state[ICE_DPLL_RCLK_NUM_MAX];
>+	struct dpll_pin_properties prop;
>+	u32 freq;
>+};
>+
>+/** ice_dpll - store info required for DPLL control
>+ * @dpll: pointer to dpll dev
>+ * @pf: pointer to pf, which has registered the dpll_device
>+ * @dpll_idx: index of dpll on the NIC
>+ * @input_idx: currently selected input index
>+ * @prev_input_idx: previously selected input index
>+ * @ref_state: state of dpll reference signals
>+ * @eec_mode: eec_mode dpll is configured for
>+ * @phase_offset: phase delay of a dpll
>+ * @input_prio: priorities of each input
>+ * @dpll_state: current dpll sync state
>+ * @prev_dpll_state: last dpll sync state
>+ * @active_input: pointer to active input pin
>+ * @prev_input: pointer to previous active input pin
>+ */
>+struct ice_dpll {
>+	struct dpll_device *dpll;
>+	struct ice_pf *pf;
>+	int dpll_idx;
>+	u8 input_idx;
>+	u8 prev_input_idx;
>+	u8 ref_state;
>+	u8 eec_mode;
>+	s64 phase_offset;
>+	u8 *input_prio;
>+	enum ice_cgu_state dpll_state;
>+	enum ice_cgu_state prev_dpll_state;
>+	struct dpll_pin *active_input;
>+	struct dpll_pin *prev_input;
>+};
>+
>+/** ice_dplls - store info required for CCU (clock controlling unit)
>+ * @kworker: periodic worker
>+ * @work: periodic work
>+ * @lock: locks access to configuration of a dpll
>+ * @eec: pointer to EEC dpll dev
>+ * @pps: pointer to PPS dpll dev
>+ * @inputs: input pins pointer
>+ * @outputs: output pins pointer
>+ * @rclk: recovered pins pointer
>+ * @num_inputs: number of input pins available on dpll
>+ * @num_outputs: number of output pins available on dpll
>+ * @cgu_state_acq_err_num: number of errors returned during periodic work
>+ * @base_rclk_idx: idx of first pin used for clock revocery pins
>+ * @clock_id: clock_id of dplls
>+ */
>+struct ice_dplls {
>+	struct kthread_worker *kworker;
>+	struct kthread_delayed_work work;
>+	struct mutex lock;
>+	struct ice_dpll eec;
>+	struct ice_dpll pps;
>+	struct ice_dpll_pin *inputs;
>+	struct ice_dpll_pin *outputs;
>+	struct ice_dpll_pin rclk;
>+	u32 num_inputs;
>+	u32 num_outputs;
>+	int cgu_state_acq_err_num;
>+	int lock_err_num;
>+	u8 base_rclk_idx;
>+	u64 clock_id;
>+};
>+
>+int ice_dpll_init(struct ice_pf *pf);
>+
>+void ice_dpll_deinit(struct ice_pf *pf);
>+
>+#endif
>diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
>index 62e91512aeab..ba5f3bc9075a 100644
>--- a/drivers/net/ethernet/intel/ice/ice_main.c
>+++ b/drivers/net/ethernet/intel/ice/ice_main.c
>@@ -4595,6 +4595,10 @@ static void ice_init_features(struct ice_pf *pf)
> 	if (ice_is_feature_supported(pf, ICE_F_GNSS))
> 		ice_gnss_init(pf);
> 
>+	if (ice_is_feature_supported(pf, ICE_F_CGU) ||
>+	    ice_is_feature_supported(pf, ICE_F_PHY_RCLK))
>+		ice_dpll_init(pf);

Why do you have the function returning int when you don't check it here?


>+
> 	/* Note: Flow director init failure is non-fatal to load */
> 	if (ice_init_fdir(pf))
> 		dev_err(dev, "could not initialize flow director\n");
>@@ -4621,6 +4625,9 @@ static void ice_deinit_features(struct ice_pf *pf)
> 		ice_gnss_exit(pf);
> 	if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags))
> 		ice_ptp_release(pf);
>+	if (ice_is_feature_supported(pf, ICE_F_PHY_RCLK) ||
>+	    ice_is_feature_supported(pf, ICE_F_CGU))
>+		ice_dpll_deinit(pf);
> }
> 
> static void ice_init_wakeup(struct ice_pf *pf)
>-- 
>2.37.3
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ