[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZIcChW9FTHm+HbYV@shell.armlinux.org.uk>
Date: Mon, 12 Jun 2023 12:33:25 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Daniel Golle <daniel@...rotopia.org>
Cc: netdev@...r.kernel.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Lorenzo Bianconi <lorenzo@...nel.org>,
Mark Lee <Mark-MC.Lee@...iatek.com>,
Sean Wang <sean.wang@...iatek.com>, John Crispin <john@...ozen.org>,
Felix Fietkau <nbd@....name>, Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Sam Shih <Sam.Shih@...iatek.com>
Subject: Re: [PATCH net-next 8/8] net: ethernet: mtk_eth_soc: add basic
support for MT7988 SoC
On Sun, Jun 11, 2023 at 01:43:37AM +0100, Daniel Golle wrote:
> if (updated) {
> - val = mtk_r32(eth, MTK_MAC_MISC);
> + val = mtk_r32(eth, reg);
> val = (val & mask) | set;
> - mtk_w32(eth, val, MTK_MAC_MISC);
> + mtk_w32(eth, val, reg);
mtk_m32() ?
> + /* Force Port1 XGMAC Link Up */
> + val = mtk_r32(eth, MTK_XGMAC_STS(MTK_GMAC1_ID));
> + mtk_w32(eth, val | MTK_XGMAC_FORCE_LINK(MTK_GMAC1_ID),
> + MTK_XGMAC_STS(MTK_GMAC1_ID));
> +
> + /* Adjust GSW bridge IPG to 11 */
> + val = mtk_r32(eth, MTK_GSW_CFG);
> + val &= ~(GSWTX_IPG_MASK | GSWRX_IPG_MASK);
> + val |= (GSW_IPG_11 << GSWTX_IPG_SHIFT) |
> + (GSW_IPG_11 << GSWRX_IPG_SHIFT);
> + mtk_w32(eth, val, MTK_GSW_CFG);
mtk_m32() for both these?
> + /* Setup gmac */
> + if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3) &&
> + mac->interface == PHY_INTERFACE_MODE_INTERNAL) {
> + mtk_w32(mac->hw, MTK_GDMA_XGDM_SEL, MTK_GDMA_EG_CTRL(mac->id));
> + mtk_w32(mac->hw, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(mac->id));
> +
> + mtk_setup_bridge_switch(eth);
I think this should be documented somewhere - that
PHY_INTERFACE_MODE_INTERNAL means the MAC is connected to a switch.
However, I'm not sure that's the best condition to use - don't we have a
way for a MAC to test if it's connected to a DSA switch?
> + /* Configure MDC Turbo Mode */
> + if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) {
> + val = mtk_r32(eth, MTK_MAC_MISC_V3);
> + val |= MISC_MDC_TURBO;
> + mtk_w32(eth, val, MTK_MAC_MISC_V3);
> + }
> val = mtk_r32(eth, MTK_PPSC);
> + if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1) ||
> + MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
> + val |= PPSC_MDC_TURBO;
> +
> + /* Configure MDC Divider */
> val &= ~PPSC_MDC_CFG;
> - val |= FIELD_PREP(PPSC_MDC_CFG, divider) | PPSC_MDC_TURBO;
> + val |= FIELD_PREP(PPSC_MDC_CFG, divider);
> mtk_w32(eth, val, MTK_PPSC);
More opportunities for mtk_m32().
> + if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_NETSYS_V3_BIT) &&
> + MTK_HAS_CAPS(mac->hw->soc->caps, MTK_ESW_BIT) &&
> + id == MTK_GMAC1_ID) {
> + mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
> + MAC_SYM_PAUSE |
> + MAC_10000FD;
> + phy_interface_zero(mac->phylink_config.supported_interfaces);
Were there bits set that you don't want?
Thanks!
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists