[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230612092355.87937-1-brgl@bgdev.pl>
Date: Mon, 12 Jun 2023 11:23:29 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>
Cc: netdev@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH 00/26] arm64: qcom: sa8775p-ride: enable the first ethernet port
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
There are three ethernet ports on sa8775p-ride. This series contains changes
required to enable one of the two 1Gb ports (the third one is 10Gb). We need
to add a new driver for the internal SerDes PHY, introduce several extensions
to the MAC driver (while at it: tweak coding style a bit etc.) and finally
add the relevant DT nodes.
Bartosz Golaszewski (26):
phy: qualcomm: fix indentation in Makefile
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qcom: add the SGMII SerDes PHY driver
arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
net: stmmac: dwmac-qcom-ethqos: shrink clock code with devres
net: stmmac: dwmac-qcom-ethqos: rename a label in probe()
net: stmmac: dwmac-qcom-ethqos: tweak the order of local variables
net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev
net: stmmac: dwmac-qcom-ethqos: add missing include
net: stmmac: dwmac-qcom-ethqos: add a newline between headers
net: stmmac: dwmac-qcom-ethqos: remove stray space
net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes
phy
net: stmmac: dwmac-qcom-ethqos: make the rgmii clock optional
net: stmmac: dwmac-qcom-ethqos: add optional phyaux clock
net: stmmac: dwmac-qcom-ethqos: add support for the optional
phy-supply
net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modes
net: stmmac: dwmac-qcom-ethqos: add support for SGMII
net: stmmac: add new switch to struct plat_stmmacenet_data
dt-bindings: net: snps,dwmac: add compatible for sa8775p ethqos
dt-bindings: net: qcom,ethqos: add description for sa8775p
net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p
platforms
arm64: dts: qcom: sa8775p-ride: add the SGMII PHY node
arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
arm64: dts: qcom: sa8775p-ride: enable ethernet0
.../devicetree/bindings/net/qcom,ethqos.yaml | 14 +-
.../devicetree/bindings/net/snps,dwmac.yaml | 3 +
.../phy/qcom,sa8775p-dwmac-sgmii-phy.yaml | 52 ++
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 +++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 39 ++
arch/arm64/configs/defconfig | 1 +
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 273 ++++++++---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/phy/qualcomm/Kconfig | 9 +
drivers/phy/qualcomm/Makefile | 3 +-
drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 446 ++++++++++++++++++
include/linux/stmmac.h | 1 +
12 files changed, 890 insertions(+), 62 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
--
2.39.2
Powered by blists - more mailing lists