[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1q959x-00EBwK-TG@rmk-PC.armlinux.org.uk>
Date: Tue, 13 Jun 2023 15:38:13 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexander Couzens <lynxis@...0.eu>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Cc@....codeaurora.org:Alexander Couzens <lynxis@...0.eu>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
Daniel Golle <daniel@...rotopia.org>,
Daniel Machon <daniel.machon@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
DENG Qingfang <dqfext@...il.com>, Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>,
Ioana Ciornei <ioana.ciornei@....com>,
Jakub Kicinski <kuba@...nel.org>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Landen Chao <Landen.Chao@...iatek.com>,
Lars Povlsen <lars.povlsen@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Madalin Bucur <madalin.bucur@....com>,
Marcin Wojtas <mw@...ihalf.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Michal Simek <michal.simek@....com>, netdev@...r.kernel.org,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Paolo Abeni <pabeni@...hat.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>,
Sean Anderson <sean.anderson@...o.com>,
Sean Wang <sean.wang@...iatek.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Taras Chornyi <taras.chornyi@...ision.eu>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
UNGLinuxDriver@...rochip.com, Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH RFC net-next 09/15] net: mvpp2: update PCS driver to use
neg_mode
Update mvpp2's embedded PCS drivers to use neg_mode rather than the
mode argument, remembering to update the ACPI path as well. As there
are no pcs_link_up() methods, this only affects the two pcs_config()
methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index adc953611913..1fec84b4c068 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6168,8 +6168,7 @@ static void mvpp2_xlg_pcs_get_state(struct phylink_pcs *pcs,
state->pause |= MLO_PAUSE_RX;
}
-static int mvpp2_xlg_pcs_config(struct phylink_pcs *pcs,
- unsigned int mode,
+static int mvpp2_xlg_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
@@ -6232,7 +6231,7 @@ static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
state->pause |= MLO_PAUSE_TX;
}
-static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
@@ -6246,7 +6245,7 @@ static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
MVPP2_GMAC_FLOW_CTRL_AUTONEG |
MVPP2_GMAC_AN_DUPLEX_EN;
- if (phylink_autoneg_inband(mode)) {
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
mask |= MVPP2_GMAC_CONFIG_MII_SPEED |
MVPP2_GMAC_CONFIG_GMII_SPEED |
MVPP2_GMAC_CONFIG_FULL_DUPLEX;
@@ -6649,8 +6648,9 @@ static void mvpp2_acpi_start(struct mvpp2_port *port)
mvpp2_mac_prepare(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
- pcs->ops->pcs_config(pcs, MLO_AN_INBAND, port->phy_interface,
- state.advertising, false);
+ pcs->ops->pcs_config(pcs, PHYLINK_PCS_NEG_INBAND_ENABLED,
+ port->phy_interface, state.advertising,
+ false);
mvpp2_mac_finish(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
mvpp2_mac_link_up(&port->phylink_config, NULL,
@@ -6896,7 +6896,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
dev->dev.of_node = port_node;
port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+ port->pcs_gmac.neg_mode = true;
port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+ port->pcs_xlg.neg_mode = true;
if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
port->phylink_config.dev = &dev->dev;
--
2.30.2
Powered by blists - more mailing lists