[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7b511c41-4bf5-f7ff-8ae9-5f1bffac50d9@linaro.org>
Date: Tue, 13 Jun 2023 21:04:08 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bartosz Golaszewski <brgl@...ev.pl>, Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
"David S . Miller" <davem@...emloft.net>, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>
Cc: netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 25/26] arm64: dts: qcom: sa8775p-ride: add pin functions
for ethernet0
On 12.06.2023 11:23, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index 7754788ea775..dbd9553aa5c7 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -370,6 +370,22 @@ &spi16 {
> };
>
> &tlmm {
> + ethernet0_default: ethernet0-default-state {
> + ethernet0_mdc: ethernet0-mdc-pins {
> + pins = "gpio8";
> + function = "emac0_mdc";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> +
> + ethernet0_mdio: ethernet0-mdio-pins {
> + pins = "gpio9";
> + function = "emac0_mdio";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> + };
> +
> qup_uart10_default: qup-uart10-state {
> pins = "gpio46", "gpio47";
> function = "qup1_se3";
Powered by blists - more mailing lists